Scissor Jacks
Fit this compact jack under low-height loads.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity @ 4" Min. Ht. | Capacity @ 7" Ht. | Capacity @ 9" Max. Lift | Saddle | Base | Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | tons | lbs. | Ht. | Max. Lift | Max. Wd. | Wd. | Lg. | Wd. | Lg. | Handle Lg. | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| 1/8 | 250 | 1/4 | 675 | 1 1/2 | 3,000 | 4"-13" | 9" | 10 1/2" | 2" | 5 1/8" | 4 1/4" | 7 3/8" | 22" | Steel | No | 2 | 3/8" | 0000000 | 000000 |
Leveling Jacks
Mount these jacks to equipment to raise and level it.
Side Mount—Weld the included mount to equipment then attach the jack to the mount. A pin locks the jack in a vertical position; pull the pin to rotate the jack into a horizontal position when not in use.
Through-Hole Mount—Mount jacks through a hole in the frame of equipment and fasten the mounting plate. Jacks with triangular plate can also be welded onto your equipment. They’re commonly used with an A-frame trailer coupler.
Jacks with foot plate have extra stability.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Mounting | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | O'all Ht. | Handle Lg. | Body Material | For Hole Dia. | No. of Holes | Fasteners Included | Hole Dia. | Hole Lg. | Hole Wd. | Features | Each | ||
Side Mount with Rectangular Mounting Plate | ||||||||||||||||
Side Handle | ||||||||||||||||
| A | 1 | 2,000 | 10 7/8"-20 7/8" | 10" | 22 3/4" | 5 7/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 0000000 |
| A | 2 1/2 | 5,000 | 10 3/8"-20 3/8" | 10" | 22 7/8" | 6 1/2" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| A | 2 1/2 | 5,000 | 15 3/8"-30 3/8" | 15" | 27 7/8" | 6 1/2" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
Top Handle | ||||||||||||||||
| A | 2 1/2 | 5,000 | 14 1/2"-29 1/2" | 15" | 27 1/2" | 7 5/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
Side Mount with Square Mounting Plate | ||||||||||||||||
Side Handle | ||||||||||||||||
| A | 1 | 2,000 | 15"-30 1/2" | 15 1/2" | 32 3/4" | 6 1/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
Top Handle | ||||||||||||||||
| A | 1 | 2,000 | 14 3/4"-29 3/4" | 15" | 30" | 6" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 00000 |
Side Mount with Tube Mounting Plate | ||||||||||||||||
Side Handle | ||||||||||||||||
| B | 1 | 2,000 | 10 7/8"-20 7/8" | 10" | 23" | 5 7/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| B | 1 | 2,000 | 15"-30 1/2" | 15 1/2" | 32 3/4" | 6 1/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| B | 2 1/2 | 5,000 | 10 1/2"-20 1/2" | 10" | 23" | 6 1/2" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| B | 2 1/2 | 5,000 | 15 1/2"-30 1/2" | 15" | 28" | 6 1/2" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| B | 3 1/2 | 7,000 | 11"-21" | 10" | 25 5/8" | 8 1/2" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| B | 5 | 10,000 | 17"-29 5/8" | 12 5/8" | 39 1/2" | 13 1/2" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
Top Handle | ||||||||||||||||
| B | 2 1/2 | 5,000 | 11 1/4"-21 1/4" | 10" | 18" | 7 5/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
Through-Hole Mount with Triangular Mounting Plate | ||||||||||||||||
Top Handle | ||||||||||||||||
| C | 2 1/2 | 5,000 | 10 1/8"-25 1/8" | 15" | 24 1/8" | 7 5/8" | Steel | 2 1/4" | 3 | No | __ | 7/16" | 13/16" | Foot Plate | 0000000 | 00000 |
| D | 2 1/2 | 5,000 | 10 7/8"-25 7/8" | 15" | 24 3/8" | 7 5/8" | Steel | 2 1/4" | 3 | No | __ | 7/16" | 13/16" | __ | 0000000 | 000000 |
Through-Hole Mount with Round Mounting Plate | ||||||||||||||||
Top Handle | ||||||||||||||||
| E | 2 1/2 | 5,000 | 4 1/2"-13 1/2" | 9" | 19 3/4" | 8 3/4" | Steel | 1 1/4" | 6 | No | 1/4" | __ | __ | Foot Plate, Slip-Resistant Rubber Pad | 000000 | 00000 |
| E | 2 1/2 | 5,000 | 4 1/2"-21 1/2" | 17" | 27 3/4" | 8 7/8" | Steel | 1 1/4" | 6 | No | 1/4" | __ | __ | Foot Plate, Slip-Resistant Rubber Pad | 000000 | 000000 |
| E | 2 1/2 | 5,000 | 4 1/2"-25 1/2" | 21" | 31 3/4" | 8 3/4" | Steel | 1 1/4" | 6 | No | 1/4" | __ | __ | Foot Plate, Slip-Resistant Rubber Pad | 000000 | 000000 |
Leveling Jacks with Wheel
Mount these jacks to equipment to raise and level it. A swivel caster lets you reposition your load.
Side Mount—Slide the frame of your equipment through the mounting plate.
Through-Hole Mount—Mount jacks through a hole in the frame of your equipment and fasten the mounting plate. These jacks are commonly used with an A-frame trailer coupler.
Locking pin locks the jack in a vertical position; pull the pin to rotate the jack into a horizontal position when not in use.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | For Frame | Mounting | Mounting Plate | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | O'all Ht. | Ht. | Dp. | Handle Lg. | Body Material | For Hole Dia. | Fasteners Included | No. of Holes | Hole Lg. | Hole Wd. | Lg. | Wd. | Wheel Material | Each | ||
Side Mount | |||||||||||||||||||
| A | 1/4 | 750 | 7 1/2"-23 1/2" | 16" | 27 7/8" | 0"-5" | 1 7/8"-2 7/8" | 5 1/2" | Steel | __ | Yes | __ | __ | __ | __ | __ | Plastic | 000000 | 0000000 |
| B | 1/2 | 1,000 | 10 13/16"-25 1/2" | 14 11/16" | 33 7/8" | 3"-5" | 2"-3" | 6 1/8" | Steel | __ | Yes | __ | __ | __ | __ | __ | Plastic | 0000000 | 000000 |
Side Mount with Locking Pin | |||||||||||||||||||
| C | 1/2 | 1,200 | 12 1/2"-22 1/2" | 10" | 28 1/8" | 2"-4" | 1 1/2"-3" | 6" | Steel | __ | Yes | __ | __ | __ | __ | __ | Plastic | 0000000 | 000000 |
| C | 3/4 | 1,500 | 12 7/8"-22 7/8" | 10" | 31 5/8" | 3"-5" | 2"-3" | 6 1/8" | Steel | __ | Yes | __ | __ | __ | __ | __ | Plastic | 0000000 | 000000 |
Through-Hole Mount | |||||||||||||||||||
| D | 1/2 | 1,200 | 8 5/8"-21 1/2" | 12 7/8" | 35 5/8" | __ | __ | 6 1/2" | Steel | 2 1/4" | No | 3 | 7/16" | 13/16" | 5 1/8" | 4 1/4" | Plastic | 0000000 | 000000 |
Two-Height Ratchet Jacks
Choose between two lifting points—use the toe for lifting loads low to the ground, or use the saddle when you need a higher, more stable lifting point. The saddle is curved to cradle curved loads. Jacks have a ratcheting action that raises or lowers the load one notch at a time. A removable handle can be used at two different positions to get the best angle for lifting.
Aluminum jacks are lighter than iron for easier portability.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Toe | Saddle | Base | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Max. Lift | Ht. | Lg. | Wd. | Ht. | Movement | Wd. | Lg. | Wd. | Lg. | Handle Lg. | Handle Material | Each | |
Iron | |||||||||||||||
| 5 | 10,000 | 7" | 1 3/4"-8 3/4" | 2 1/2" | 1 1/8" | 14"-21" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 000000000 |
| 5 | 10,000 | 10" | 1 3/4"-11 3/4" | 2 1/2" | 1 1/8" | 17"-27" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 00000000 |
| 5 | 10,000 | 13" | 1 3/4"-14 3/4" | 2 1/2" | 1 1/8" | 20"-33" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 00000000 |
| 10 | 20,000 | 9 1/2" | 1 5/8"-11 1/8" | 2 3/8" | 1 1/8" | 17 1/4"-26 3/4" | Rigid | 2 5/8" | 2 7/8" | 8 3/4" | 6" | 60" | Steel | 0000000 | 00000000 |
| 10 | 20,000 | 12" | 2"-14" | 2 3/8" | 2 1/2" | 21 5/8"-33 5/8" | Rigid | 2 1/2" | 3" | 10 1/4" | 6 1/2" | 60" | Steel | 000000 | 00000000 |
| 15 | 30,000 | 12 3/4" | 2 1/4"-15" | 2 5/8" | 2 1/4" | 23 1/4"-36" | Rigid | 2 7/8" | 3 1/2" | 10 1/4" | 8" | 70" | Steel | 0000000 | 00000000 |
| 15 | 30,000 | 18" | 2 1/4"-20 1/4" | 2 5/8" | 2 1/4" | 28"-46" | Rigid | 2 7/8" | 3 1/2" | 11" | 8" | 70" | Steel | 0000000 | 00000000 |
Aluminum  | |||||||||||||||
| 10 | 20,000 | 12" | 2"-14" | 2 3/8" | 2 1/2" | 21 5/8"-33 5/8" | Rigid | 2 1/2" | 3" | 10 1/4" | 6 1/2" | 60" | Steel | 000000 | 00000000 |
Ratchet Jacks
These jacks can be used to lift, spread, push, pull, and clamp. The ratcheting action raises or lowers the load one notch at a time. For clamping, turn the top plate 90° and ratchet the jack to secure your workpiece.
Note: Jacks must be loaded with at least 150 lbs. to safely lower your load one notch at a time. When loaded with less than 150 lbs., the notches are bypassed and the load will drop freely.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Toe | Base | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max., tons | Range, lbs. | Max. Clamping Force, lbs. | Ht. | Max. Lift | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Handle Material | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| 1 1/4 | 150-2,500 | 750 | 4 1/2"-49 3/4" | 45 1/4" | 4 1/2" | 1 3/8" | 7" | 4" | 32" | Steel | Iron | No | 12 | 1/2" | 000000 | 0000000 |
| 2 1/4 | 150-4,500 | 750 | 4 1/2"-38 5/8" | 34 1/8" | 4 1/2" | 1 3/8" | 7" | 4" | 32" | Steel | Iron | No | 12 | 1/2" | 000000 | 000000 |
Wrench-Adjustable Screw Jacks
Use these low-profile jacks in confined spaces. The screw adjustment lets you make small changes to the height of your load.
Jack with rigid saddle is also known as a spreader jack.
Jacks with swivel saddle keep loads from slipping. Also known as planer jacks, they have a side locking screw that keeps the jack extended and prevents lowering due to vibration.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Saddle | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Dia. | Swivel Angle | Base Wd. | Body Material | Each | |
With Rigid Saddle | |||||||||
| 3 | 6,000 | 3"-4" | 1" | 1 1/2" | __ | 2" | Steel | 0000000 | 0000000 |
With Swivel Saddle | |||||||||
| 2 | 4,000 | 2 3/4"-3 3/4" | 1" | 1 1/4" | 25° | 2 3/8" | Iron | 000000 | 000000 |
| 4 | 8,000 | 3 3/4"-5 1/4" | 1 1/2" | 1 3/4" | 25° | 3 1/8" | Iron | 000000 | 000000 |
| 6 | 12,000 | 5 1/4"-7 1/2" | 2 1/4" | 2 1/8" | 25° | 4" | Iron | 000000 | 000000 |
| 8 | 16,000 | 7 1/2"-11 1/2" | 4" | 2 1/2" | 25° | 5 3/8" | Iron | 000000 | 000000 |
Bar-Adjustable Screw Jacks
The turning bar (sold separately) gives you leverage to lift heavier loads than wrench-adjustable screw jacks. The screw adjustment lets you make small changes to the height of your load. The saddle swivels to keep loads from slipping. The jack head has multiple openings so you can choose the best angle for inserting the turning bar.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Saddle | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Dia. | Swivel Angle | Base Dia. | Body Material | Each | |
| 12 | 24,000 | 9 5/8"-13 3/8" | 3 3/4" | 2 7/8" | 9° | 4 3/4" | Iron | 0000000 | 0000000 |
| 12 | 24,000 | 11 5/8"-17 3/8" | 5 3/4" | 2 7/8" | 9° | 5 1/2" | Iron | 0000000 | 000000 |
| 12 | 24,000 | 15 3/4"-25 1/2" | 9 3/4" | 2 7/8" | 9° | 6 1/4" | Iron | 0000000 | 000000 |
| 20 | 40,000 | 11 7/8"-16 7/8" | 5" | 3 1/8" | 9° | 6" | Iron | 0000000 | 000000 |
| 20 | 40,000 | 13 3/4"-20 3/4" | 7" | 3 1/8" | 9° | 6 1/2" | Iron | 0000000 | 000000 |
| 20 | 40,000 | 15 3/4"-24 3/4" | 9" | 3 1/8" | 9° | 6 3/4" | Iron | 0000000 | 000000 |
| 24 | 48,000 | 17"-25 1/4" | 8 1/4" | 3 1/4" | 9° | 7 1/4" | Iron | 0000000 | 000000 |
| 24 | 48,000 | 23"-37 1/4" | 14 1/4" | 3 1/4" | 9° | 8 1/2" | Iron | 0000000 | 000000 |
Ratchet Jack Stands
The ratcheting action of these jacks stands makes adjusting them under load easier than screw jack stands. Use them to hold and adjust the height of heavy loads such as truck trailers.
Note: Jack stands should not be moved when under load.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Cap. | Holding Cap. | Saddle | Base | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | Ht. | Max. Lift | Dia. | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Wheel Material | Features | Each | |
With Two Axle-Mounted Wheels | |||||||||||||||
| 20 | 40,000 | 50 | 100,000 | 39"-51" | 12" | 8" | __ | __ | 16" | 17 5/8" | 20" | Rubber | Removable Handle | 0000000 | 0000000 |
With Three Axle-Mounted Wheels | |||||||||||||||
| 20 | 40,000 | 50 | 100,000 | 40"-51" | 11 1/2" | __ | 24" | 6" | 16" | 17 5/8" | 20" | Rubber and Steel | Removable Handle | 0000000 | 000000 |
| Component | For Wheel Configuration | Wheel Material | Includes | Each | |
| Grip | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | __ | __ | 0000000 | 00000 |
| Handle | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | __ | 1 Grip | 0000000 | 00000 |
| Saddle | Two Axle-Mounted Wheels | __ | __ | 0000000 | 000000 |
| Wheel | Three Axle-Mounted Wheels | Steel | __ | 0000000 | 00000 |
| Wheel Kit | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | Rubber | 1 Axle, 1 Cotter Pin, 2 Wheels | 0000000 | 000000 |
Screw Jack Stands
Hold and adjust the height of heavy loads such as truck trailers. The screw adjustment lets you make small changes to the height of your load.
Note: Jack stands should not be moved when under load.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Cap. | Holding Cap. | Saddle | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | Ht. | Max. Lift | Lg. | Wd. | Base Dia. | Each | |
| 2 1/2 | 5,000 | 25 | 50,000 | 44"-51" | 7" | 5" | 5" | 14" | 0000000 | 0000000 |
Cap. | Holding Cap. | Saddle | Base | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | Ht. | Max. Lift | Dia. | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Wheel Material | Features | Each | |
With Two Axle-Mounted Wheels | |||||||||||||||
| 20 | 40,000 | 50 | 100,000 | 39"-51" | 11 1/2" | 8" | __ | __ | 16" | 17 5/8" | 20" | Rubber | Removable Handle | 0000000 | 0000000 |
With Three Axle-Mounted Wheels | |||||||||||||||
| 20 | 40,000 | 50 | 100,000 | 40"-51" | 11 1/2" | __ | 24" | 6" | 16" | 17 5/8" | 20" | Rubber, Steel | Removable Handle | 0000000 | 000000 |
| Component | For Wheel Configuration | Wheel Material | Includes | Each | |
| Grip for Stationary Jack Stands | __ | __ | __ | 0000000 | 000000 |
| Grip for Mobile Jack Stands | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | __ | __ | 0000000 | 0000 |
| Handle for Mobile Jack Stands | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | __ | 1 Grip | 0000000 | 00000 |
| Saddle for Mobile Jack Stands | Two Axle-Mounted Wheels | __ | __ | 0000000 | 000000 |
| Wheel for Mobile Jack Stands | Three Axle-Mounted Wheels | Steel | __ | 0000000 | 00000 |
| Wheel Kit for Mobile Jack Stands | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | Rubber | 1 Axle, 1 Cotter Pin, 2 Wheels | 0000000 | 000000 |
Jack Stands—Not for Lifting
After raising a load, add these steel stands for support.
Locking handles lock the ratchet bar in place to support the load.
Locking pins are inserted through the riser to lock the bar in place.
Note: Do not raise or lower stands while under load. Always use stands in pairs and on a hard, flat surface.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity per Pair | Saddle | Base | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Ht. Adjustment Increments | Lg. | Wd. | Dia. | Lg. | Wd. | Pair | ||
Locking Handle | |||||||||||
| A | 6 | 12,000 | 12"-17 3/4" | 9/16" | 1" | 3 1/2" | __ | 7 1/2" | 8 1/4" | 0000000 | 000000 |
| A | 12 | 24,000 | 15 5/8"-23 3/4" | 11/16" | 1 1/4" | 4 1/4" | __ | 10 3/8" | 11 5/8" | 0000000 | 000000 |
Locking Pin | |||||||||||
| B | 12 | 24,000 | 19"-29 1/2" | 1 1/2" | 3" | 6" | 15 7/8" | __ | __ | 0000000 | 000000 |
| C | 44 | 88,000 | 13 7/8"-19 7/8" | 3" | 3" | 3 3/4" | __ | 11" | 11" | 0000000 | 000000 |
Leveling Micrometer Heads
Precisely level heavy machines, surface plates, and other devices when accuracy is crucial. These heads raise and lower objects in 0.01 mm increments, which is as thin as a single sheet of paper. Turn the handle to adjust their height, even when under a machine.
Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range, mm | Measuring Increments, mm | Point Angle | Spindle Face Material | Capacity, lbs. | Wd. | Ht. | Base Dia. | Handle Lg. | Features | Manufacturer | Manufacturer Model Number | Each | |
Plain Thimble—Rotating Spindle | |||||||||||||
| 60 to 75 | 0.01 | 90° | Steel | 850 | 4 19/32" | 2 3/8" | 2 17/32" | 3 11/32" | Handle | Mitutoyo | 7850 | 0000000 | 0000000 |