We will reply to your message within an hour.
Determine if stainless steel is the right material for you and which types will work best.
Often used for fasteners and valves, 410 stainless steel withstands wear caused by abrasion.
Precision ground on the top and bottom to a tight tolerance.
Bend this wire and it will stay in place. It's commonly used as tying and locking wire.
These balls are hardened for increased wear and abrasion resistance.
One of the hardest types of stainless steel after heat treating, 440C offers excellent wear and abrasion resistance. It's often used for bearings, valves, and knife blades.
With a diameter that’s held to a close tolerance, this material is hardened for increased wear and abrasion resistance.
Ready for turning in your lathe, these rods are precision ground to a tight tolerance.
The width and thickness are oversized for finishing to your exact requirements.
This material is hardened for increased wear resistance over standard 420 stainless steel.
Suitable for making molds, 420 stainless steel is a hard, wear-resistant material that can be finely polished to a very smooth surface.
The addition of vanadium and carbon gives 420V stainless steel excellent wear resistance. It can replace tool steel in highly abrasive applications.
Also called flat stock, these precision-ground bars are held to tight thickness and width tolerances.
440A stainless steel resists damage from impact and abrasion. It's often used for cutlery and valve components.
With excellent strength and wear resistance, S30V stainless steel is a preferred material for knives and cutlery.
One of the most machinable types of stainless steel available, 416 contains sulfur for fast machining without clogging cutting tools. It's used for gears, screws, and shafts.
Hardened for superior wear resistance, these rods are precision ground to a tight diameter tolerance so they’re ready for turning in a lathe.
Precision ground to a tight diameter tolerance, these rods are all set for turning applications in a lathe.
With a higher chromium content than 15-5 PH stainless steel, this high-strength 17-4 PH offers better corrosion resistance. It is also known as 630 stainless steel.
Each piece is precision ground to offer tighter tolerances than standard 17-4 PH stainless steel.
This material is hardened for improved strength and wear resistance.
Hardened for improved strength and wear resistance, these rods are precision ground to a strict diameter tolerance. Use them for turning applications in your lathe.
Also known as Project 70+, this material machines faster with less wear on cutting tools than standard 17-4 PH stainless steel.
As the most formable of all the PH-grade materials, 17-7 PH stainless steel is widely used in the aerospace industry for intricate parts. When hardened, this material strengthens to make it resist distortion.
13-8 PH stainless steel can be hardened at lower temperatures than other heat-treatable types of stainless steel. It is widely used for fittings, pins, and lock washers.
Offering outstanding strength, 15-5 PH stainless steel is often used for gears and shafts.
Cut this stock into custom shapes to fit your application.
Cut this stock to length to create the machine key you need. Straight keys, with a square or rectangular cross section, are the most common type of key. Install in a keyway to transmit torque from shafts to gears and other components.