Cut these labels to a desired length. Use color to identify equipment, materials, and documents at a glance.

This label tape can withstand temperatures up to 240° F and is autoclavable, so you can use it to identify equipment that needs to be sterilized.

Includes blue, green, red, and yellow labels for color coding to identify equipment, materials, and documents at a glance. These labels easily peel off when they’re no longer needed.

The adhesive on these labels withstands temperatures from -320° to 170° F.

Point to small areas on equipment such as circuit boards.

Stick these labels on wet or frozen plastic, glass, metal, and paperboard surfaces.

The adhesive on these labels withstands temperatures from -320° to 300° F. Stick them to plastic, glass, and metal surfaces.

Refill the tape in your Brady BMP21 label printer.

These ink ribbons are compatible with Brady BMP71 printers.

Tape works with Epson label printers.

Use this tape with Sato Primark printers.

This label tape works with Dyno Rhino model printers.

For use with Dymo Rhino M1011 embossing label printers.

Use this tape with Dymo LetraTag or Office-Mate II embossing label printers.

Good for large-volume jobs, these labels come on perforated sheets that can be fed continuously through a pin-feed printer.

These labels peel off easily when they're no longer needed.

Identify pipe contents in low-light conditions.

Secure peeling edges of adhesive pipe markers. Printed arrows on the tape's surface indicate the flow direction of your pipe's contents.

Indicate the flow direction in your pipe.

Use a permanent marker to label the contents of a pipe. Apply directly onto clean, dry pipes.

Also known as pipe banding tape, use this tape to secure peeling edges of adhesive pipe markers.

Write directly on these pipe markers to label the contents of your pipe. They coil around your pipe and stay in place without adhesive, so they’re ideal for pipes that are often greasy and dirty.

Specify the message you need to label a pipe that’s frequently washed down.

These dispensers have a space to write information on a wire marker before using it.

These books have characters used in telecom configurations such as L1 and T1.

Choose from books with letters and symbols or a range of numbers.

Dispensers make it quick and easy to remove the markers you need.

The characters repeat on these markers so you can wrap them around various-sized wires.

The messages on these labels clearly display the status of materials. Write additional information in the spaces provided with a permanent marker.

Write your information on these labels and then seal the laminating flap to protect your message from weather and tampering.

Indicate voltage and identify power lines, conduit, fuse boxes, switches, and other electrical equipment.

Print on labels up to 4” wide to create shipping labels, warehouse labels, bar codes, name tags, and other labels. Use with a computer.

Emboss a message on plastic labels.

Print labels in Braille to put on objects such as office supplies and warehouse equipment.

These printers have a built-in handle for carrying around your facility and a wide, computer-style keyboard that's easy to type on at a workspace.

Thicker than other floor marking tape, this tape withstands abrasion in high-traffic areas.

Call attention to hazards in low-light conditions.

Direct traffic and identify safety zones in the dark for up to six hours.

Thicker than other floor marking arrows, use these abrasion-resistant arrows in high-traffic areas.

You can easily pull this tape up when it's no longer needed.

Thicker than other floor marking tape, this tape withstands abrasion in high-traffic areas.

Identify safety zones and hazards in the dark for up to six hours.

Apply tape neatly and efficiently.

These peel-and-stick shapes make it easy to outline equipment and other areas within your facility.

The checkered pattern draws greater attention to safety zones and hazards than solid tape.

Thicker than other floor marking dots, use these abrasion-resistant dots in high-traffic areas.

Bury this tape above piping and cable to warn excavators and prevent damage.

These conspicuity tape kits contain everything you need to meet D.O.T. requirements for marking a truck or trailer.

Bond the shorter, softer fibers of recycled cardboard with the specially formulated adhesive on this tape.

The strong backing on this kraft paper tape resists moisture and weathering, yet it can still be torn by hand.

Seal boxes with rough or challenging surfaces, such as corrugated and printed cardboard.

This tape forms a stronger bond than our other packaging tape.

This general purpose tape is suitable for most packaging applications.

Tri-directional fiberglass strands provide extra strength.

Wet the adhesive on this gummed kraft paper tape to secure corrugated, printed, and overstuffed cartons.

Use this tape for light duty bundling and strapping. Fiberglass fibers run along the length.

For added reinforcement, fiberglass fibers run the length and width of this strapping tape. It forms stronger bonds than our other reinforced tape.

A layer of foil inside this tape will set off metal detectors if it falls into your food processing line, alerting you to the contamination.

Temporarily mount drawings and blueprints —this tape releases cleanly without damaging paper.

With excellent resistance to solvents, this tape is often used as blocking tape on silk screen frames.

Create dams in pipes before welding, then wash away with water or steam.

Only 0.0019" thick, so spliced film and paper easily pass through machinery without breaking.

Use this tape for light duty mounting, as well as to splice paper, foil, film, and fabric.

Made with fiberglass for durability and abrasion resistance, this tape also withstands high temperatures.

Outline and draw attention to safety zones and hazards with this tape.

Temporarily protect highly polished plastic, metal, and glass surfaces from scratching and marring.

In addition to resisting harsh chemicals, this tape withstands moisture, abrasion, and repeated impact.

Made of thick vinyl to resist abrasion, these tape sheets protect floor labels from heavy foot and vehicle traffic.

At half the thickness of our other masking tape for electronics, this polyimide tape conforms easily to components.

In addition to handling temperatures up to 500° F, this fiberglass tape is tough enough for abrasive applications such as sand blasting.

The adhesive on this crepe paper tape won't damage painted and finished surfaces.

For outdoor painting jobs, this plastic tape stands up to the elements. The high-tack adhesive works on rough exterior surfaces, such as stucco and masonry.

This crepe paper tape keeps its hold, even on 300° F surfaces.

Brush on this liquid to mask small surfaces and irregular shapes.

Use these crepe paper discs to mask areas while spray painting, as well as to temporarily cover holes for dust protection.

Cover holes, fastener heads, and small areas with these shapes.

Use this tape to wrap and splice cables, mask components while soldering, or as a 3D printing surface.

Made of polyester plastic, this tape resists tearing in high-temperature masking jobs, such as on circuit boards and when powder coating.

Also known as Ruby Red lithographer's tape, this semi-clear tape filters out light that can affect photo-sensitive film and equipment.