Compare electrical conductivity, machinability, formability, and more to identify the best material for your application.
Weldable Marine-Grade 464 Brass Sheets and Bars
A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 20,000 psi
- Hardness: Not Rated
- Temper: Not Rated
- Heat Treatable: No
- Specifications Met: ASTM B171
6" × 6" | 12" × 12" | ||||
|---|---|---|---|---|---|
| Thick. | Thick. Tolerance Range | Each | Each | ||
| 1/4" | -0.02" to 0.02" | 0000000 | 000000 | 0000000 | 0000000 |
| 1/2" | -0.05" to 0.05" | 0000000 | 000000 | 0000000 | 000000 |
| 3/4" | -0.056" to 0.056" | 0000000 | 000000 | 0000000 | 000000 |
| 1" | -0.066" to 0.066" | 0000000 | 000000 | 0000000 | 000000 |
| 1 1/4" | -0.076" to 0.076" | 0000000 | 000000 | 0000000 | 000000 |
| 1 1/2" | -0.076" to 0.076" | 0000000 | 000000 | 0000000 | 00000000 |
- Yield Strength: 22,000 psi
- Hardness: Rockwell B55 (Soft)
- Temper: H02 (1/2 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B21
| Wd. | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/4" Thick. (-0.005" to 0.005" Tolerance) | |||||
|---|---|---|---|---|---|
| 1" | 1/2" per 10 ft. | 0000000 | |||
| 1 1/2" | 1/2" per 10 ft. | 0000000 | |||
3/8" Thick. (-0.005" to 0.005" Tolerance) | |||||
| 4" | 1/2" per 10 ft. | 0000000 | |||
1/2" Thick. (-0.005" to 0.005" Tolerance) | |||||
| 1/2" | 1/2" per 10 ft. | 0000000 | |||
| 1" | 1/2" per 10 ft. | 0000000 | |||
| 1 1/2" | 1/2" per 10 ft. | 0000000 | |||
| 2" | 1/2" per 10 ft. | 0000000 | |||
| 2 1/2" | 1/2" per 10 ft. | 0000000 | |||
| 3" | 1/2" per 10 ft. | 0000000 | |||
5/8" Thick. (-0.006" to 0.006" Tolerance) | |||||
| 5/8" | 1/2" per 10 ft. | 0000000 | |||
3/4" Thick. (-0.006" to 0.006" Tolerance) | |||||
| 3/4" | 1/2" per 10 ft. | 0000000 | |||
| 1" | 1/2" per 10 ft. | 0000000 | |||
| 1 1/2" | 1/2" per 10 ft. | 0000000 | |||
| 3" | 1/2" per 10 ft. | 0000000 | |||
1" Thick. (-0.006" to 0.006" Tolerance) | |||||
| 1" | 1/2" per 10 ft. | 0000000 | |||
| 1 1/4" | 1/2" per 10 ft. | 0000000 | |||
| 1 1/2" | 1/2" per 10 ft. | 0000000 | |||
| 2" | 1/2" per 10 ft. | 0000000 | |||
| 3" | 1/2" per 10 ft. | 0000000 | |||
1 1/2" Thick. (-0.007" to 0.007" Tolerance) | |||||
| 1 1/2" | 1/2" per 10 ft. | 0000000 | |||
2" Thick. (-0.007" to 0.007" Tolerance) | |||||
| 2" | 1/2" per 10 ft. | 0000000 | |||
Brushed Weldable Marine-Grade 464 Brass Sheets
- Yield Strength: 58,000 psi
- Hardness: Rockwell B80 (Medium)
- Temper: H01 (1/4 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B171
One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints. The brushed side comes covered with a protective peel-off film. A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
12" × 12" | 12" × 24" | 24" × 24" | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Thick. Tolerance Range | Mechanical Finish | Flatness Tolerance | Each | Each | Each | |||
| 0.032" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 0000000 |
| 0.04" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
| 0.062" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
| 0.08" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| 0.125" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| 0.187" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| 0.25" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000000 |
Mirror-Like Weldable Marine-Grade 464 Brass Sheets
- Yield Strength: 58,000 psi
- Hardness: Rockwell B80 (Medium)
- Temper: H01 (1/4 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B171
Polished on one side to a reflective, mirror-like finish, these sheets come covered with a protective peel-off film. A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
12" × 12" | 12" × 24" | 24" × 24" | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Thick. Tolerance Range | Mechanical Finish | Flatness Tolerance | Each | Each | Each | |||
| 0.032" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 000000 | 0000000 | 0000000 | 0000000 | 0000000 |
| 0.04" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
| 0.062" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| 0.08" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| 0.125" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| 0.187" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| 0.25" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000000 |
Weldable Marine-Grade 464 Brass Rods
- Yield Strength: 22,000 psi
- Hardness: Rockwell B55 (Soft)
- Temper: H02 (1/2 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B21
A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance Range | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 3/16" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 1/4" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 5/16" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 3/8" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 7/16" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 1/2" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 9/16" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 5/8" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 3/4" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 7/8" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 1" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 1 1/4" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 1 1/2" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 2" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 |
Marine-Grade 485 Brass
- Yield Strength: 25,000 psi
- Hardness:
3/16" to 3/8" dia. rods: Not Rated
All other sizes: Rockwell B60 (Soft) - Temper:
3" dia. rods: M30
All other sizes: H02 (1/2 Hard) - Heat Treatable: No
- Specifications Met: ASTM B21
Also known as high-leaded naval brass, 485 brass contains lead for good machinability. It is commonly used for marine hardware, valve stems, and screw machine products.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance Range | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 3/16" | -0.002" to 0.002" | 0000000 | |||
| 5/16" | -0.002" to 0.002" | 0000000 | |||
| 3/8" | -0.002" to 0.002" | 0000000 | |||
| 1/2" | -0.002" to 0.002" | 0000000 | |||
| 5/8" | -0.002" to 0.002" | 0000000 | |||
| 3/4" | -0.002" to 0.002" | 0000000 | |||
| 7/8" | -0.002" to 0.002" | 0000000 | |||
| 1" | -0.002" to 0.002" | 0000000 | |||
| 1 1/8" | -0.003" to 0.003" | 0000000 | |||
| 1 1/4" | -0.003" to 0.003" | 0000000 | |||
| 1 3/8" | -0.003" to 0.003" | 0000000 | |||
| 1 1/2" | -0.003" to 0.003" | 0000000 | |||
| 1 3/4" | -0.003" to 0.003" | 0000000 | |||
| 2" | -0.003" to 0.003" | 0000000 | |||
| 3" | -0.005" to 0.005" | 0000000 |