These winches are stainless steel for corrosion resistance. Their one-piece machined gears stand up to daily use. An automatic brake holds the load when the handle is released. To lift, mount winches above the load or use winches with a pulley that's mounted above the load.

For wire rope, see Wire Rope with Hook for Winches.

Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.

Warning: Never use to lift people or items over people.

Move loads more gradually than with other winches. These take longer to wind but require less effort. Their one-piece machined gears stand up to daily use. An automatic brake holds the load when the handle is released. To lift, mount winches above the load or use winches with a pulley that's mounted above the load. Enclosed gears offer protection from dirt and debris.

For wire rope, see Wire Rope with Hook for Winches.

Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.

Warning: Never use to lift people or items over people.

These winches are designed for occasional use. An automatic brake holds the load when the handle is released. To lift, mount winches above the load or use winches with a pulley that's mounted above the load.

For wire rope, see Wire Rope with Hook for Winches.

Enclosed gears offer protection from dirt and debris.

Winches with a left-side handle are more comfortable for left-handed users to operate, and can be used in spaces where right-side handles can’t fit. Winches with a right- or left-side handle are convertible, letting you easily switch between your left and right hand.

Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

Turn the crank to move material horizontally. These winches wind faster than precise-positioning winches.

Winches with two speeds wind quickly in high gear and more easily in low gear than single-speed winches.

For wire rope, see Wire Rope with Hook for Winches.

Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.

Remove the handle to wind these winches with a power drill.

For wire rope, see Wire Rope with Hook for Winches.

Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.

These winches move loads more gradually than standard hand winches. They take longer to wind but require less effort.

For wire rope, see Wire Rope with Hook for Winches.

Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.

One-piece gears provide more durability than the riveted gears of other hand winches. These winches move loads more gradually than standard hand winches. They take longer to wind but require less effort.

For wire rope, see Wire Rope with Hook for Winches.

Enclosed gears offer protection from dirt and debris.

Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.

Webbing wraps neatly around the winch to prevent tangles in the line.

Ratchet handle pumps up and down rather than turning completely around the winch and is good for tight spaces.

Winches with two speeds wind quickly in high gear and more easily in low gear.

Note: Capacity is highest for the first layer of webbing (at least five wraps of webbing on the winch) and decreases as each additional layer of webbing is wound on the winch.

Also known as davit cranes, these lift objects out of holes such as sewers. An automatic brake holds your load securely when the handle is released.

Styles D and E can be disassembled for convenient transport and storage.

Powder-coated steel cranes offer some corrosion resistance. Stainless steel cranes have the most corrosion resistance.

Install additional bases throughout your plant and move your hand-winch crane between them to use a single crane in multiple locations. They can also be used to replace existing bases.

Replacement headache balls keep cable taut when no load is attached.

Warning: Never use to lift people or items over people.

Install these bases in different areas of your plant and slot in your hand-winch crane where needed. They can also be used to replace existing bases.

Stainless steel bases are more corrosion resistant than steel bases.

For technical drawings and 3-D models, click on a part number.

Save your back from loading toolboxes, generators, and other heavy items into your truck. These cranes slide right into your hitch—no need to modify your vehicle to mount them. Designed with an offset, you can lower the tailgate fully with the crane installed. Mount the crane to lift from the right or the left side of the truck depending on your task. Also known as davit cranes, they have a hand winch to raise the load, and an automatic brake holds the load securely when you release the handle.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

These cranes are half the weight of other hand-winch cranes with similar capacity and can be lifted from their base for easy transport. They're also known as davit cranes. Use them to lift objects out of holes such as sewers. Made from fiberglass, all are corrosion resistant and nonconductive. An automatic brake holds your load securely when the handle is released.

Install additional bases throughout your plant and move your hand-winch crane between them to use a single crane in multiple locations. They can also be used to replace existing bases.

Warning: Never use to lift people or items over people.

Mount these cranes to a workbench or utility cart to lift and position loads in tight workspaces. They’re often used in repair or assembly tasks to lift heavy tools and parts. Their compact size makes them easy to move from one base to another. Additional bases are sold separately. Turn the hand wheel clockwise to lift your load. An automatic brake holds your load securely in place when you let go of the wheel. These cranes rotate a full 360°, making it easy to position a load on your workbench or on nearby equipment such as a CNC machine.

Cranes with a roller chain winch move at a more consistent speed than those with a wire rope winch. Since the roller chain moves around a sprocket, raising loads doesn’t require additional force as you go—unlike wire rope on a spool. Cranes with a wire rope winch are best for dirty environments because there are no chain links that could trap debris. These cranes also move more smoothly, because there’s less jerking as the wire rope moves around the spool than there is with a roller chain on a sprocket.

Cranes with a lever lowering mechanism require you to release the brake lever next to the hand wheel. As you do, lightly press your palm on the hand wheel to control how fast your load descends. Cranes with a hand-winch lowering mechanism are easier to use and give you more control than cranes that lower with a lever. Simply turn the hand wheel counterclockwise to lower.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.