No need for separate outlet boxes—these combine a switch and a receptacle into a single box.

For technical drawings and 3-D models, click on a part number.

Control multiple lights in the same footprint a standard light switch fits in.

For technical drawings and 3-D models, click on a part number.

Control lights by transmitting a wireless signal from these switches to a control relay (sold separately) on your fixture. Switches can be surface mounted with a wall plate or used as a hand-held remote. No batteries or secondary power source are needed.

Similar to a seesaw, these switches have an actuator that pivots when pressed to turn them on or off. They’re often used to control lighting, but they also work with AC motor loads up to 80% of the current rating. All fit standard wall plates (not included) and won’t stick out from your wall as much as toggle light switches.

Switches with spring-clamp terminals are quicker to install than those with screw terminals. Just push your bare wires into the connectors.

Illuminated switches glow when turned off, making them easy to spot in the dark.

Switches with a power indicator glow when activated. This means you can see whether a device or outlet is powered directly on the switch even if they’re in different rooms.

Wall switch lockouts (sold separately) mount over switches to secure them in the on or off position.

For technical drawings and 3-D models, click on a part number.

Also known as three-way switches, these are often used in large, open workspaces and can be wired on opposite ends of the room to control lights on the same circuit. They work in pairs to control lights from two different locations. Actuate the switch by pressing on the wide, flat area. With a slim, low-profile design, they protrude less than toggle switches. All fit standard wall plates (not included).

Switches with spring-clamp terminals install quickly to create a secure connection. Just push a stripped wire into the clamp—no need to bend wire and screw it down.

Wall switch lockouts (sold separately) mount over switches to secure them in the on or off position.

Combine a switch and receptacle into a single outlet box for a small footprint. The rocker switch is low-profile, so it protrudes off the wall less than other switches.

For technical drawings and 3-D models, click on a part number.

Switch lights on and off no matter the forecast. NEMA 3R rated, these switches have a gasket that blocks out weather. They are rocker switches, so they protrude less off your wall than other switches.

Control multiple lights in the same footprint a standard light switch fits in. The low-profile design of these rocker switches protrudes less than other switches.

For technical drawings and 3-D models, click on a part number.

Install these switches inline on a lamp cord.

For technical drawings and 3-D models, click on a part number.

Prevent accidental activation—these switches require a key to turn lights on and off. They’re keyed alike, so all switches actuate with the same key. They also work with AC motor loads up to 80% of the current rating. All fit standard wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Also known as three-way switches, these are often used in large, open workspaces and can be wired on opposite ends of the room to control lights on the same circuit. They work in pairs to control lights from two different locations. To prevent accidental activation, they require a key to turn lights on and off. They’re keyed alike, so all switches actuate with the same key. They also work with AC motor loads up to 80% of the current rating. All fit standard wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Secure sensitive lighting equipment; these switches have a round key that is difficult to duplicate. The key is required to turn lights on and off. They’re keyed alike, so all switches actuate with the same key. They also work with AC motor loads up to 80% of the current rating.

Flat and completely smooth, these switches are easy to wipe down. They’re rated NEMA 3R, so they seal out water that could damage the circuitry. They also won’t corrode from mild cleaning solutions. With just a light tap, you can switch lights on and off, even if you’re wearing gloves.

Switches with a stainless steel wall plate resist wear and tear better than switches with a plastic wall plate.

Flip a switch from here, there, or anywhere—these switches connect wirelessly to your phone or smart device. Use the downloadable app and built-in Wi-Fi connection to quickly sync these switches to your device. Not only can you turn the lights on and off from the app, but you can also program a lighting schedule that doesn't interfere with manual use. For example, set your lights to turn off automatically at the end of a shift. Someone working in the area can still turn them on or off throughout the day.

Install up to three switch companions to manually turn the lights on and off from multiple locations, just like a multi-way switch. No extra wiring is necessary—these connect wirelessly to the smart switch. Mount them directly to any interior wall surface or an existing outlet box.