About Magnets
More
Neodymium Magnets
Made of neodymium, these rare earth magnets are the strongest for their size. The nickel-plated finish resists corrosion.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
For technical drawings and 3-D models, click on a part number.
Each | |||||||
|---|---|---|---|---|---|---|---|
| OD | Max. Pull, lbs. | Max. Temperature, °F | Magnet Grade | Adhesive Type | 1-49 | 50-Up | |
Adhesive on North Pole | |||||||
Magnetized Through Thickness | |||||||
0.06" Thick. | |||||||
| 3/16" | 0.9 | 170° | N35 | Acrylic | 0000000 | 00000 | 00000 |
0.08" Thick. | |||||||
| 1" | 6 | 170° | N35 | 3M VHB (Very High Bond) | 0000000 | 00000 | 0000 |
0.1" Thick. | |||||||
| 1/4" | 1.9 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
| 3/8" | 2.9 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
0.118" Thick. | |||||||
| 0.315" | 2.9 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
| 0.472" | 4 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
| 0.709" | 6 | 170° | N35 | Acrylic | 0000000 | 00000 | 0000 |
1/8" Thick. | |||||||
| 1/2" | 4 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
3/16" Thick. | |||||||
| 3/4" | 10 | 170° | N35 | Acrylic | 0000000 | 00000 | 00000 |
1/4" Thick. | |||||||
| 1/2" | 9 | 170° | N35 | Acrylic | 0000000 | 00000 | 0000 |
Adhesive on South Pole | |||||||
Magnetized Through Thickness | |||||||
0.06" Thick. | |||||||
| 3/16" | 0.9 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
0.08" Thick. | |||||||
| 1" | 6 | 170° | N35 | 3M VHB (Very High Bond) | 0000000 | 00000 | 0000 |
0.1" Thick. | |||||||
| 1/4" | 1.9 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
| 3/8" | 2.9 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
0.118" Thick. | |||||||
| 0.315" | 2.9 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
| 0.472" | 4 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
| 0.709" | 6 | 170° | N35 | Acrylic | 0000000 | 00000 | 0000 |
1/8" Thick. | |||||||
| 1/2" | 4 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 |
3/16" Thick. | |||||||
| 3/4" | 10 | 170° | N35 | Acrylic | 0000000 | 00000 | 00000 |
1/4" Thick. | |||||||
| 1/2" | 9 | 170° | N35 | Acrylic | 0000000 | 00000 | 0000 |
Adhesive on North Pole | Adhesive on South Pole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Each | Each | ||||||||||
| Wd. | Lg. | Max. Pull, lbs. | Max. Temperature, °F | Magnet Grade | Adhesive Type | 1-49 | 50-Up | 1-49 | 50-Up | ||
Magnetized Through Thickness | |||||||||||
0.074" Thick. | |||||||||||
| 0.153" | 15/32" | 1.7 | 170° | N35 | Acrylic | 0000000 | 00000 | 00000 | 0000000 | 00000 | 00000 |
0.1" Thick. | |||||||||||
| 0.13" | 1/4" | 1.6 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 | 0000000 | 0000 | 0000 |
| 1/4" | 1/4" | 2.2 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 | 0000000 | 0000 | 0000 |
| 1/2" | 1/2" | 4 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 | 0000000 | 0000 | 0000 |
3/16" Thick. | |||||||||||
| 3/16" | 3/8" | 4 | 170° | N35 | Acrylic | 0000000 | 0000 | 0000 | 0000000 | 0000 | 0000 |
| 3/4" | 3/4" | 12 | 170° | N35 | Acrylic | 0000000 | 00000 | 00000 | 0000000 | 00000 | 00000 |
Multi-Pole Neodymium Magnets
Many small poles give these nickel-plated magnets shallower, more concentrated magnetic fields that hold especially well on thin material. To prevent accidental attachment, they won't attract until they're close to the material. Also known as Polymagnets®.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
For technical drawings and 3-D models, click on a part number.
Each | ||||||||
|---|---|---|---|---|---|---|---|---|
| Wd. | Lg. | Max. Pull, lbs. | Sets of Poles | Max. Temperature, °F | Magnet Grade | 1-49 | 50-Up | |
Magnetized Through Thickness | ||||||||
3/16" Thick. | ||||||||
| 1" | 1 1/2" | 62 | 35 | 180° | N35 | 0000000 | 000000 | 000000 |
Neodymium Magnets with Unthreaded Hole
Made of neodymium, these rare earth magnets are the strongest for their size. Slide onto a rod or use a bolt or screw to install.
Choose a straight, countersunk, or counterbored hole. Magnets with a countersink on one side can be mounted with the North pole facing out.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
For technical drawings and 3-D models, click on a part number.
Each | ||||||||
|---|---|---|---|---|---|---|---|---|
| OD | Hole Dia. | Max. Pull, lbs. | Max. Temperature, °F | Magnet Grade | For Screw Size | 1-49 | 50-Up | |
Magnetized Through Thickness | ||||||||
1/8" Thick. | ||||||||
| 3/8" | 1/8" | 4.5 | 210° | N35 | No. 4 | 00000000 | 00000 | 00000 |
| 3/8" | 0.135" | 2.5 | 170° | N35 | No. 4 | 0000000 | 0000 | 0000 |
| 1/2" | 0.135" | 5.72 | 170° | N35 | No. 4 | 0000000 | 0000 | 0000 |
| 5/8" | 0.165" | 6.5 | 170° | N35 | No. 6 | 0000000 | 0000 | 0000 |
| 3/4" | 0.188" | 6.94 | 170° | N35 | No. 8 | 0000000 | 00000 | 00000 |
| 7/8" | 0.188" | 8.11 | 170° | N35 | No. 8 | 0000000 | 00000 | 00000 |
3/16" Thick. | ||||||||
| 1" | 0.213" | 16.4 | 170° | N35 | No. 10 | 0000000 | 00000 | 00000 |
Encased Neodymium Magnets with Unthreaded Hole
A case protects the magnetic material. Steel cases also concentrate and focus the magnetic field. Made of neodymium, these rare earth magnets are the strongest for their size.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
For technical drawings and 3-D models, click on a part number.
Each | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | OD | Hole Dia. | Max. Pull, lbs. | Sets of Poles | Max. Temperature, °F | Magnet Grade | Cover Material | Mounting Hole Style | Number of Mounting Holes | For Screw Size | 1-49 | 50-Up | ||
Zinc-Plated Steel Case | ||||||||||||||
| 1 | 0.18" | 0.63" | 0.138" | 16.5 | 1 | 175° | N35 | __ | Countersunk | 1 | No. 4 | 0000000 | 00000 | 00000 |
| 1 | 0.24" | 0.79" | 0.177" | 23 | 1 | 175° | N35 | __ | Countersunk | 1 | No. 8 | 0000000 | 0000 | 0000 |
| 1 | 0.28" | 0.98" | 0.177" | 35 | 1 | 175° | N35 | __ | Countersunk | 1 | No. 8 | 0000000 | 00000 | 0000 |
| 1 | 0.28" | 1.26" | 0.217" | 68 | 1 | 175° | N35 | __ | Countersunk | 1 | No. 12 | 00000000 | 00000 | 00000 |
| 1 | 0.31" | 1.57" | 0.217" | 110 | 1 | 175° | N35 | __ | Countersunk | 1 | No. 12 | 00000000 | 00000 | 00000 |
| 2 | 1/2" | 4.9" | 1/2" | 270 | 1 | 170° | N35 | Stainless Steel | Straight | 1 | 1/2" | 0000000 | 00000 | 00000 |
| 3 | 5/16" | 2 1/32" | 3/16" | 95 | 2 | 170° | N35 | Stainless Steel | Straight | 1 | No. 8 | 0000000 | 00000 | 00000 |
| 4 | 3/8" | 2 5/8" | 9/32" | 200 | 7 | 170° | N35 | Stainless Steel | Straight | 1 | 1/4" | 0000000 | 00000 | 00000 |
Chrome-Plated Steel Case | ||||||||||||||
| 1 | 0.27" | 0.781" | 0.176" | 13 | 2 | 170° | N35 | __ | Straight | 1 | No. 5 | 00000000 | 0000 | 0000 |
| 1 | 0.314" | 0.977" | 0.216" | 30 | 2 | 170° | N35 | __ | Straight | 1 | No. 8 | 00000000 | 0000 | 0000 |
| 1 | 0.315" | 1.26" | 0.217" | 55 | 2 | 170° | N35 | __ | Countersunk | 1 | No. 3 | 00000000 | 0000 | 0000 |
| 2 | 3/16" | 1.21" | 1/8" | 40 | 2 | 170° | N35 | Stainless Steel | Straight | 1 | No. 4 | 0000000 | 00000 | 0000 |
| 2 | 17/64" | 1.43" | 0.192" | 65 | 2 | 170° | N35 | Stainless Steel | Straight | 1 | No. 8 | 0000000 | 00000 | 00000 |
| 2 | 19/64" | 2.04" | 0.193" | 90 | 2 | 170° | N35 | Stainless Steel | Straight | 1 | No. 8 | 0000000 | 00000 | 00000 |
| 2 | 0.35" | 2 3/8" | 17/64" | 110 | 2 | 170° | N35 | Stainless Steel | Straight | 1 | 1/4" | 0000000 | 00000 | 00000 |
| 2 | 3/8" | 2 5/8" | 9/32" | 140 | 2 | 170° | N35 | Stainless Steel | Straight | 1 | 1/4" | 0000000 | 00000 | 00000 |
| 2 | 0.425" | 3.2" | 0.28" | 195 | 4 | 170° | N35 | Stainless Steel | Straight | 1 | 1/4" | 00000000 | 00000 | 00000 |
| 2 | 1/2" | 4.9" | 1/2" | 300 | 4 | 170° | N35 | Stainless Steel | Straight | 1 | 3/8" | 00000000 | 00000 | 00000 |
| 4 | 0.2" | 1 1/4" | 0.138" | 40 | 7 | 175° | N35 | __ | Straight | 1 | No. 5 | 0000000 | 00000 | 0000 |
| 4 | 0.325" | 2.04" | 0.197" | 110 | 6 | 175° | N35 | __ | Straight | 1 | No. 8 | 0000000 | 00000 | 00000 |
Aluminum Case | ||||||||||||||
| 5 | 1" | 3" | 9/32" | 290 | 2 | 170° | N35 | __ | Countersunk | 2 | 1/4" | 0000000 | 00000 | 00000 |
| 6 | 1/2" | 2" | 9/32" | 90 | 2 | 170° | N35 | __ | Countersunk | 1 | 1/4" | 0000000 | 00000 | 00000 |
| 6 | 1" | 2" | 9/32" | 120 | 2 | 170° | N35 | __ | Countersunk | 1 | 1/4" | 0000000 | 00000 | 00000 |
| 6 | 1" | 2 1/2" | 9/32" | 180 | 2 | 170° | N35 | __ | Countersunk | 1 | 1/4" | 0000000 | 00000 | 00000 |
Nonmarring Encased Neodymium Magnets with Unthreaded Hole
A rubber cover protects the mounting surface as well as the magnet, and a steel case concentrates and focuses the magnetic field. Made of neodymium, these rare earth magnets are the strongest for their size.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
For technical drawings and 3-D models, click on a part number.
Each | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | OD | Hole Dia. | Max. Pull, lbs. | Sets of Poles | Max. Temperature, °F | Magnet Grade | Cover Material | For Screw Size | Color | 1-49 | 50-Up | |
Chrome-Plated Steel Case | ||||||||||||
| 0.2" | 1 1/4" | 0.138" | 16 | 1 | 175° | N35 | Rubber | No. 5 | Silver | 0000000 | 00000 | 00000 |
| 0.35" | 2 3/8" | 0.197" | 63 | 1 | 160° | N35 | Silicone | No. 8 | Black | 0000000 | 00000 | 00000 |
| 0.445" | 3 3/16" | 0.27" | 75 | 1 | 160° | N35 | Silicone | 1/4" | Black | 0000000 | 00000 | 00000 |
| 0.51" | 3 7/8" | 0.378" | 90 | 1 | 160° | N35 | Silicone | 3/8" | Black | 0000000 | 00000 | 00000 |
Encased Neodymium Magnets with Threaded Stud
A steel case concentrates and focuses the magnetic field. It also protects the magnetic material. Made of neodymium, these rare earth magnets are the strongest for their size.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
For technical drawings and 3-D models, click on a part number.
Each | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Thick. | OD | Overall Ht. | Max. Pull, lbs. | Sets of Poles | Max. Temperature, °F | Magnet Grade | Thread Size | Thread Pitch, mm | Stud Lg. | 1-49 | 50-Up | |
Zinc-Plated Steel Case | |||||||||||||
| 1 | 9mm | 40mm | 20mm | 100 | 1 | 175° | N35 | M6 | 1 | 11mm | 0000000 | 000000 | 000000 |
| 3 | 1/4" | 1/2" | __ | 6 | 1 | 170° | N35 | __ | __ | __ | 0000000 | 0000 | 00 |
| 3 | 1/4" | 5/8" | __ | 16 | 1 | 170° | N35 | __ | __ | __ | 0000000 | 0000 | 00 |
| 3 | 1/4" | 3/4" | __ | 16 | 1 | 170° | N35 | __ | __ | __ | 0000000 | 0000 | 00 |
| 3 | 17/64" | 1" | __ | 26 | 1 | 170° | N35 | __ | __ | __ | 0000000 | 0000 | 00 |
| 3 | 17/64" | 1 1/8" | __ | 30 | 1 | 170° | N35 | __ | __ | __ | 0000000 | 0000 | 00 |
| 3 | 17/64" | 1 1/2" | __ | 35 | 1 | 170° | N35 | __ | __ | __ | 0000000 | 00000 | 00 |
| 3 | 9/32" | 7/8" | __ | 23 | 1 | 170° | N35 | __ | __ | __ | 0000000 | 0000 | 00 |
Encased Neodymium Magnets with Threaded Hole
A metal case protects the magnetic material. Steel cases also concentrate and focus the magnetic field. Made of neodymium, these rare earth magnets are the strongest for their size.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
For technical drawings and 3-D models, click on a part number.
Each | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | OD | Max. Pull, lbs. | Sets of Poles | Max. Temperature, °F | Magnet Grade | Color | Thread Size | Thread Dp. | 1-49 | 50-Up | ||
Steel Case | ||||||||||||
| 1 | 1/2" | 3/8" | 6 | 1 | 170° | N35 | Silver | 8-32 | 0.1" | 0000000 | 000000 | 000000 |
| 1 | 1/2" | 1/2" | 16 | 1 | 170° | N35 | Silver | 10-32 | 0.12" | 0000000 | 00000 | 00000 |
| 1 | 1/2" | 3/4" | 40 | 1 | 170° | N35 | Silver | 10-32 | 0.15" | 0000000 | 00000 | 00000 |
| 1 | 1/2" | 1" | 90 | 1 | 170° | N35 | Silver | 1/4"-20 | 0.15" | 0000000 | 00000 | 00000 |
| 1 | 1/2" | 1 1/4" | 130 | 1 | 170° | N35 | Silver | 5/16"-18 | 0.15" | 0000000 | 00000 | 00000 |
Aluminum Case | ||||||||||||
| 1 | 1/2" | 1/4" | 0.5 | 1 | 170° | N35 | Silver | 6-32 | 1/4" | 0000000 | 0000 | 0000 |
| 1 | 1/2" | 3/8" | 2.6 | 1 | 170° | N35 | Silver | 8-32 | 1/4" | 0000000 | 0000 | 0000 |
| 1 | 1/2" | 1/2" | 5 | 1 | 170° | N35 | Silver | 10-24 | 1/4" | 0000000 | 00000 | 0000 |
| 1 | 1/2" | 5/8" | 8 | 1 | 170° | N35 | Silver | 10-24 | 1/4" | 0000000 | 00000 | 0000 |
| 1 | 1/2" | 3/4" | 12 | 1 | 170° | N35 | Silver | 10-24 | 1/4" | 0000000 | 00000 | 0000 |
| 1 | 1/2" | 1" | 15 | 1 | 170° | N35 | Silver | 1/4"-20 | 1/4" | 0000000 | 00000 | 00000 |
| 2 | 1 3/16" | 3/4" | 35 | 1 | 170° | N35 | Silver | 1/4"-20 | 1/4" | 0000000 | 00000 | 00000 |
| 2 | 1 5/16" | 1" | 85 | 1 | 170° | N35 | Silver | 1/4"-20 | 5/16" | 0000000 | 00000 | 00000 |
| 2 | 2 1/16" | 1 1/2" | 200 | 1 | 170° | N35 | Silver | 5/16"-18 | 5/16" | 0000000 | 000000 | 00000 |
| 2 | 2 7/16" | 2" | 340 | 1 | 170° | N35 | Silver | 3/8"-16 | 5/16" | 0000000 | 000000 | 00000 |
Press-Fit Encased Magnets
Press these magnets into a drilled hole so they are flush against the surface. A case protects the magnetic material. Made of neodymium, these rare earth magnets are the strongest for their size.
Styles 1 and 3 have a steel case that concentrates and focuses the magnetic field.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
For technical drawings and 3-D models, click on a part number.
| Style | Thick. | OD | Max. Pull, lbs. | Sets of Poles | Max. Temperature, °F | Magnet Grade | Includes | Each | |
Zinc-Plated Steel Case | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3 | 1/4" | 3/8" | 2 | 1 | 170° | N35 | No. 4 Screw, Steel Washer | 0000000 | 00000 |
Easy On/Off Magnets
Turn the handle to switch these magnets on and off. They're made of neodymium, a rare earth material, with a nickel plating for protection in corrosive environments. A steel case concentrates and focuses the magnetic field. It also protects the magnetic material.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
For technical drawings and 3-D models, click on a part number.
| Wd. | Lg. | Ht. | Overall Ht. | Max. Pull, lbs. | Sets of Poles | Max. Temperature, °F | Magnet Grade | Material | Case Material | Thread Size | Thread Dp. | Number of Mounting Holes | Each | |
Magnet with Threaded Hole | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 1/2" | 1 3/4" | 1 3/4" | 3 1/8" | 150 | 1 | 175° | N35 | Nickel-Plated Neodymium (Rare Earth) | Steel | 8-32 | 5/16" | 12 | 0000000 | 0000000 |
| 2 1/2" | 3" | 2 3/4" | 4 7/8" | 450 | 1 | 175° | N35 | Nickel-Plated Neodymium (Rare Earth) | Steel | 1/4"-20 | 1/2" | 14 | 0000000 | 000000 |
| 4" | 4 1/4" | 3" | 5 1/8" | 1,000 | 1 | 175° | N35 | Nickel-Plated Neodymium (Rare Earth) | Steel | 3/8"-16 | 5/8" | 14 | 0000000 | 000000 |