About Cam Latches and Locks
More
Magnet-Mount Hooks
Attach these general purpose hooks to steel walls, cabinets, and other magnetic surfaces.
Styles E-G swing up and out of the way. Style F also rotates for easy positioning.
For technical drawings and 3-D models, click on a part number.
Overall | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Style | Wd. | Ht. | Dp. | Cap., lbs. | Material | Appearance | Base Material | Base Appearance | Each | |
Wall, Under Mount | ||||||||||
| C | 1 3/8" | 1 3/8" | 1 1/8" | 40 | Chrome-Plated Steel | Polished | Nickel-Plated Steel | Polished | 00000000 | 000000 |
| E | 1 1/8" | 1 3/4" | 3/4" | 40 | Chrome-Plated Steel | Polished | Chrome-Plated Steel | Polished | 00000000 | 00000 |
| F | 1 1/2" | 1 1/2" | 1 1/8" | 65 | Chrome-Plated Steel | Polished | Black Powder-Coated Steel | __ | 00000000 | 00000 |
Magnet-Mount Holders
Store tools such as brooms, screwdrivers, and flashlights with these holders that attach to magnetic surfaces.
Styles A and B have a threaded stud with multiple nuts to hold items in place.
Style C have a spring-loaded latch that snaps closed to hold items securely.
For technical drawings and 3-D models, click on a part number.
Magnetic Latches
Often used on audio/visual cabinets, magnetic force keeps your doors closed. Note: Maximum pull-strength rating given is based on installation with the furnished strike plate; pull strength may be different based on the application.
Style 12 latches are designed for use on glass doors with wood frames. To install the strike plate, press it over the edge of the door. Secure the latch body to the underside of the top frame with a wood screw.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Max. Pull Strength, lbs. | Ht. | Wd. | Dp. | Mounting Hole Ctr.-to-Ctr. | Material | Ht. | Wd. | Dp. | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size  | Each | |
Chrome-Plated Brass—Dull | ||||||||||||||
| 1 | 34 | 15/16" | 3 1/2" | 2" | 7/8", 2 13/16" | Steel | 3/4" | 2 11/16" | __ | 2 5/16" | Yes | No. 5, No. 6 | 000000 | 000000 |
Chrome-Plated Zinc with Latch Cover—Polished | ||||||||||||||
| 12 | 3 | 1/2" | 1 1/4" | 1 1/8" | 13/16" | Chrome-Plated Steel | 13/16" | 1 5/16" | 1/2" | __ | Yes | M4 | 00000000 | 00000 |
Electronic Status-Indicating Two-Way-Drive Cam Locks
Trigger a light, alarm, or other device to signal your door is unlocked. These locks have a magnet on the cam that is detected by a sensor (required, sold separately). When you unlock the door, the magnet moves out of the sensing range, activating a switch that turns your device on or off. Lock the door to reset the switch. When choosing a lock, consider the magnet location that works best for your setup. Install your sensor next to the side of the cam where the magnet is located. You cannot use these locks near existing magnetic fields, since they could interfere with the sensor.
These locks open with a two-way key (sold separately). Also known as a double-bit key, it matches a keying system that’s common for industrial enclosures and other machinery but is more secure than a hex key or screwdriver. These locks also have a flat, concealed design that stops others from tampering with them using pliers. Sometimes called quarter-turn locks, they have a cam that rotates 90° to close enclosure doors. You can adjust the cam’s latching distance, so these locks are best for jobs when precise distances are unknown. Adjust the position of the cam before installing.
A gasket stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP65 and NEMA 4 ratings.
Sensors with a light illuminate when the latch is open, so you can see the inside of your enclosure when you swing open the door.
Single pole, double throw (SPDT) sensors can be set to turn a device from off to on (normally open) or from on to off (normally closed).
For technical drawings and 3-D models, click on a part number.
Straight Cam | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Magnet Location | For Max. Thick. | Latching Distance | For Through Hole Dia. | Head Dia. | Lg. | Wd. | Mounting Fasteners Included | For Use On | Environmental Rating | Each | |
3 mm Key Size | |||||||||||
Chrome-Plated Zinc—Polished | |||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | |||||||||||
| Left Side | 15/64" | 1 1/16"-1 15/32" | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 000000 |
| Top | 15/64" | 1 1/16"-1 15/32" | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
| Right Side | 15/64" | 1 1/16"-1 15/32" | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
5 mm Key Size | |||||||||||
Chrome-Plated Zinc—Polished | |||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | |||||||||||
| Left Side | 15/64" | 1 1/16"-1 15/32" | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
| Top | 15/64" | 1 1/16"-1 15/32" | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
| Right Side | 15/64" | 1 1/16"-1 15/32" | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
| Voltage | Current, A | Max. Switching Current @ Voltage | Light Included | Housing Material | Temp. Range, °F | Mount Type | Electrical Connection | No. of Wire Leads | No. of Poles | Lg. | Wd. | Dp. | Environmental Rating | Each | |
Hardwire | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SPST-NO—1 Off (Normally Open) | |||||||||||||||
| 12V DC | 0.5 | 0.5 A @ 12 V DC | No | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 2 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 000000 |
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 4 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |
Plug In | |||||||||||||||
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | Molex Micro-Fit 3.0 | __ | 6 | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |
Electronic Status-Indicating Slotted-Drive Cam Locks
Trigger a light, alarm, or other device to signal your door is unlocked. These locks have a magnet on the cam that is detected by a sensor (required, sold separately). When you unlock the door, the magnet moves out of the sensing range, activating a switch that turns your device on or off. Lock the door to reset the switch. When choosing a lock, consider the magnet location that works best for your setup. Install your sensor next to the side of the cam where the magnet is located. You cannot use these locks near existing magnetic fields, since they could interfere with the sensor.
These locks open with a slotted screwdriver (not included) for a simple keying system. Also known as quarter-turn locks, they have a cam that rotates 90° to close enclosure doors. You can adjust the cam’s latching distance, so these locks are best for jobs when precise distances are unknown. Adjust the position of the cam before installing.
A gasket stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP65 and NEMA 4 ratings.
Sensors with a light illuminate when the latch is open, so you can see the inside of your enclosure when you swing open the door.
Single pole, double throw (SPDT) sensors can be set to turn a device from off to on (normally open) or from on to off (normally closed).
For technical drawings and 3-D models, click on a part number.
Straight Cam | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Magnet Location | For Max. Thick. | Latching Distance | For Through Hole Dia. | Head Dia. | Lg. | Wd. | Mounting Fasteners Included | For Use On | Environmental Rating | Each | |
Chrome-Plated Zinc—Polished | |||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | |||||||||||
| Left Side | 15/64" | 1 1/16"-1 15/32" | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 000000 |
| Top | 15/64" | 1 1/16"-1 15/32" | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
| Right Side | 15/64" | 1 1/16"-1 15/32" | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
| Voltage | Current, A | Max. Switching Current @ Voltage | Light Included | Housing Material | Temp. Range, °F | Mount Type | Electrical Connection | No. of Wire Leads | No. of Poles | Lg. | Wd. | Dp. | Environmental Rating | Each | |
Hardwire | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SPST-NO—1 Off (Normally Open) | |||||||||||||||
| 12V DC | 0.5 | 0.5 A @ 12 V DC | No | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 2 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 000000 |
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 4 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |
Plug In | |||||||||||||||
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | Molex Micro-Fit 3.0 | __ | 6 | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |
Electronic Status-Indicating Square-Drive Cam Locks
Trigger a light, alarm, or other device to signal your door is unlocked. These locks have a magnet on the cam that is detected by a sensor (required, sold separately). When you unlock the door, the magnet moves out of the sensing range, activating a switch that turns your device on or off. Lock the door to reset the switch. When choosing a lock, consider the magnet location that works best for your setup. Install your sensor next to the side of the cam where the magnet is located. You cannot use these locks near existing magnetic fields, since they could interfere with the sensor.
Open these locks with a square key (sold separately)—it matches a keying system that’s common for industrial enclosures and other machinery but is more secure than a hex key or screwdriver. These locks also have a flat, concealed design that stops others from tampering with them using pliers. Also known as quarter-turn locks, they have a cam that rotates 90° to close enclosure doors. You can adjust the cam’s latching distance, so these locks are best for jobs when precise distances are unknown. Adjust the position of the cam before installing.
A gasket stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain your enclosure’s IP65 and NEMA 4 ratings.
Sensors with a light illuminate when the latch is open, so you can see the inside of your enclosure when you swing open the door.
Single pole, double throw (SPDT) sensors can be set to turn a device from off to on (normally open) or from on to off (normally closed).
For technical drawings and 3-D models, click on a part number.
Locks | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Straight Cam | Keys | |||||||||||||
| Magnet Location | For Max. Thick. | Latching Distance | Square Size, mm | For Through Hole Dia. | Head Dia. | Lg. | Wd. | Mounting Fasteners Included | For Use On | Environmental Rating | Each | Each | ||
Chrome-Plated Zinc—Polished | ||||||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | ||||||||||||||
| Left Side | 15/64" | 1 1/16"-1 15/32" | 8 | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 000000 | 0000000 | 00000 |
| Top | 15/64" | 1 1/16"-1 15/32" | 8 | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 | 0000000 | 0000 |
| Right Side | 15/64" | 1 1/16"-1 15/32" | 8 | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 | 0000000 | 0000 |
| Voltage | Current, A | Max. Switching Current @ Voltage | Light Included | Housing Material | Temp. Range, °F | Mount Type | Electrical Connection | No. of Wire Leads | No. of Poles | Lg. | Wd. | Dp. | Environmental Rating | Each | |
Hardwire | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SPST-NO—1 Off (Normally Open) | |||||||||||||||
| 12V DC | 0.5 | 0.5 A @ 12 V DC | No | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 2 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 000000 |
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 4 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |
Plug In | |||||||||||||||
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | Molex Micro-Fit 3.0 | __ | 6 | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |
Electronic Status-Indicating Triangle-Drive Cam Locks
Trigger a light, alarm, or other device to signal your door is unlocked. These locks have a magnet on the cam that is detected by a sensor (required, sold separately). When you unlock the door, the magnet moves out of the sensing range, activating a switch that turns your device on or off. Lock the door to reset the switch. When choosing a lock, consider the magnet location that works best for your setup. Install your sensor next to the side of the cam where the magnet is located. You cannot use these locks near existing magnetic fields, since they could interfere with the sensor.
Open these locks with a triangle key (sold separately). This type of key matches a keying system that’s common for industrial enclosures and other machinery but is more secure than a hex key or screwdriver. These locks also have a flat, concealed design that stops others from tampering with them using pliers. Also known as quarter-turn locks, they have a cam that rotates 90° to close enclosure doors. You can adjust the cam’s latching distance, so these locks are best for jobs when precise distances are unknown. Adjust the position of the cam before installing.
A gasket stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain your enclosure’s IP65 and NEMA 4 ratings.
Sensors with a light illuminate when the latch is open, so you can see the inside of your enclosure when you swing open the door.
Single pole, double throw (SPDT) sensors can be set to turn a device from off to on (normally open) or from on to off (normally closed).
For technical drawings and 3-D models, click on a part number.
Locks | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Straight Cam | Keys | |||||||||||||
| Magnet Location | For Max. Thick. | Latching Distance | Triangle Size, mm | For Through Hole Dia. | Head Dia. | Lg. | Wd. | Mounting Fasteners Included | For Use On | Environmental Rating | Each | Each | ||
Chrome-Plated Zinc—Polished | ||||||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | ||||||||||||||
| Left Side | 15/64" | 1 1/16"-1 15/32" | 8 | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 000000 | 0000000 | 00000 |
| Top | 15/64" | 1 1/16"-1 15/32" | 8 | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 | 0000000 | 0000 |
| Right Side | 15/64" | 1 1/16"-1 15/32" | 8 | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 | 0000000 | 0000 |
| Voltage | Current, A | Max. Switching Current @ Voltage | Light Included | Housing Material | Temp. Range, °F | Mount Type | Electrical Connection | No. of Wire Leads | No. of Poles | Lg. | Wd. | Dp. | Environmental Rating | Each | |
Hardwire | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SPST-NO—1 Off (Normally Open) | |||||||||||||||
| 12V DC | 0.5 | 0.5 A @ 12 V DC | No | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 2 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 000000 |
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 4 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |
Plug In | |||||||||||||||
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | Molex Micro-Fit 3.0 | __ | 6 | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |
Electronic Status-Indicating Hex-Drive Cam Locks
Trigger a light, alarm, or other device to signal your door is unlocked. These locks have a magnet on the cam that is detected by a sensor (required, sold separately). When you unlock the door, the magnet moves out of the sensing range, activating a switch that turns your device on or off. Lock the door to reset the switch. When choosing a lock, consider the magnet location that works best for your setup. Install your sensor next to the side of the cam where the magnet is located. You cannot use these locks near existing magnetic fields, since they could interfere with the sensor.
These locks open with a hex key (not included) for a simple keying system. Also known as quarter-turn locks, they have a cam that rotates 90° to close enclosure doors. You can adjust the cam’s latching distance, so these locks are best for jobs when precise distances are unknown. Adjust the position of the cam before installing.
A gasket stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP65 and NEMA 4 ratings.
Single pole, double throw (SPDT) sensors can be set to turn a device from off to on (normally open) or from on to off (normally closed).
Sensors with a light illuminate when the latch is open, so you can see the inside of your enclosure when you swing open the door.
For technical drawings and 3-D models, click on a part number.
Straight Cam | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Magnet Location | For Max. Thick. | Latching Distance | Hex Size, mm | For Through Hole Dia. | Head Dia. | Lg. | Wd. | Mounting Fasteners Included | For Use On | Environmental Rating | Each | |
Chrome-Plated Zinc—Polished | ||||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | ||||||||||||
| Left Side | 15/64" | 1 1/16"-1 15/32" | 8 | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 000000 |
| Top | 15/64" | 1 1/16"-1 15/32" | 8 | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
| Right Side | 15/64" | 1 1/16"-1 15/32" | 8 | 7/8" | 1 1/8" | 2" | 1 3/16" | Yes | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
| Voltage | Current, A | Max. Switching Current @ Voltage | Light Included | Housing Material | Temp. Range, °F | Mount Type | Electrical Connection | No. of Wire Leads | No. of Poles | Lg. | Wd. | Dp. | Environmental Rating | Each | |
Hardwire | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SPST-NO—1 Off (Normally Open) | |||||||||||||||
| 12V DC | 0.5 | 0.5 A @ 12 V DC | No | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 2 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 000000 |
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | __ | 4 | __ | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |
Plug In | |||||||||||||||
SPDT—1 Off (Normally Open) or 1 On (Normally Closed) | |||||||||||||||
| 12V DC | 0.4 | 0.4 A @ 12 V DC | Yes | Polycarbonate Plastic | -40° to 175° | Adhesive Back | Molex Micro-Fit 3.0 | __ | 6 | 1" | 1" | 5/8" | IP67 | 00000000 | 00000 |