Easy to keep clean thanks to their design, these filters pull metal and magnetic particles out of food and sanitary material as it passes through gravity hoppers, chutes, and other parts of your process line. This helps you comply with Hazard Analysis and Critical Control Point (HACCP) programs for food safety. Made entirely of 316 stainless steel, these filters won’t break down from washdowns with harsh cleaners found in food plants. They’re also polished and have smooth welded seams, so they’re free of crevices where bacteria could grow, reducing the risk of illness.

Magnets are sealed inside the rods.

For technical drawings and 3-D models, click on a part number.

These filters are designed without guide rods to prevent wet and sticky material from blocking flow. Use to pull ferrous metal scrap and particles out of your process line. Mount filters inside gravity hoppers, chutes, drawers, housings, and surge-and-catch bins. Magnets are sealed in the magnetic rod.

Filters with a maximum magnetic pull of 1 lb. catch nails, bolts, washers, staples, and other large iron metal objects.

Filters with a maximum magnetic pull of 11.2 lbs. catch metal filings, shavings, residue from metal wear, and other small particles.

For technical drawings and 3-D models, click on a part number.

The guide rods direct flow to the magnetic rods. These filters are helpful in removing dry ferrous metal scrap and particles from fine powder and low-flow applications. Mount inside gravity hoppers, chutes, drawers, housings, and surge-and-catch bins. Magnets are sealed in the magnetic rod.

Filters with a maximum magnetic pull of 1 lb. catch nails, bolts, washers, staples, and other large iron metal objects.

Filters with a maximum magnetic pull of 11.2 lbs. catch metal filing, shaving, residue from metal wear, and other small particles.

For technical drawings and 3-D models, click on a part number.

Keep coolant systems free of small particles, such as chip filings and metal dust. The magnets are sealed in the rod.

Pull the rods from their sleeve to release particles stuck to the filter. These filters catch fine particles such as metal filings, shavings, and residue from metal wear in your process line. Mount inside gravity hoppers, chutes, drawers, housings, and surge-and-catch bins. Magnets are sealed in rods.

For technical drawings and 3-D models, click on a part number.