Easy to keep clean thanks to their design, these filters pull metal and magnetic particles out of food and sanitary material as it passes through gravity hoppers, chutes, and other parts of your process line. This helps you comply with Hazard Analysis and Critical Control Point (HACCP) programs for food safety. Made entirely of 316 stainless steel, these filters won’t break down from washdowns with harsh cleaners found in food plants. They’re also polished and have smooth welded seams, so they’re free of crevices where bacteria could grow, reducing the risk of illness.

Magnets are sealed inside the rods.

For technical drawings and 3-D models, click on a part number.

Pull the rods from their sleeve to release particles stuck to the filter. These filters catch fine particles such as metal filings, shavings, and residue from metal wear in your process line. Mount inside gravity hoppers, chutes, drawers, housings, and surge-and-catch bins. Magnets are sealed in rods.

For technical drawings and 3-D models, click on a part number.

Keep coolant systems free of small particles, such as chip filings and metal dust. The magnets are sealed in the rod.

Pull iron metal scrap and particles out of your process line as it moves through chutes and hoppers. Mount flush with the surface of your container; position below the flow of material.

Direct-mount filters bolt directly to chutes and hoppers. Can also be installed up to 3” above conveyor belts.

Hinged-mount filters provide access to clean the magnetic surface. You can also mount as a door on chutes and hoppers.

For technical drawings and 3-D models, click on a part number.

Draw metal shavings and other contaminants out of your sanitary liquid line with these strainers. As liquid swirls through the strainer cavity, magnets sealed inside capture any metal bits. Remaining impurities are separated out with gravity and trapped in a collection sump. Empty the strainers by removing the lid and scooping up the collected particles at the bottom of the enclosure. These strainers have quick-clamp connections, so they’re good for frequent deep cleans and line changes. Also known as tri-clamp fittings, they connect with a gasket, a clamp, and another quick-clamp fitting for quick removal and assembly.

These strainers are 316 stainless steel, which won’t corrode from frequent washdowns with harsh cleaners. The continuous weld seams and polished surfaces are free of pits and crevices where bacteria could grow, making them easy to sanitize. Rated for high temperatures, you can keep these strainers on your line during a heated clean-in-place (CIP) process. All strainers and their included gasket are FDA compliant, meaning they are safe for food contact.

Filters that are USDA certified meet the highest standards of sanitary design.

For technical drawings and 3-D models, click on a part number.

Separate stacked steel sheets without prying, scratching, or bending them. These separators have a magnet which causes your stacked sheets to fan out. When you remove the top sheet, the next sheet automatically moves up. Separators have two nonmagnetic bars to keep plates moving freely.

Note: The number of separators required is approximate and you may need to add more separators.

The handles of these assorted picks have a magnet at the end to pick up small steel objects. Use to hold and position wire, springs, and other small parts.

Change tips to use a different size or style pick for holding and positioning wire, springs, and other small parts.

Handles have a magnet at the end to pick up small steel objects.