About Grease
More
About Oil
More
About Lubricants
More
Food Industry Grease
Use this grease in food-processing and preparation areas.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Grease that is NSF registered H1 and grease that meets FDA 21 CFR 178.3570 are rated for incidental contact with food. Synthetic-oil-based grease lasts longer than mineral-oil-based grease and generally withstands a wider range of temperatures.
Grease with PTFE thickener has good heat, moisture, and oxidation resistance.
Grease lubricates most efficiently within the listed temperature range. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly. Chemours Krytox™ GPL 206 resists aggressive chemicals and is long lasting with an indefinite shelf life.
Container | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Specifications Met | Each | |
Chemours Krytox™ GPL 206—PTFE Thickener | |||||||||
| 2 | Synthetic | 1/2 fl. oz. | Tube | -30° to 500° | Nonmelting | White | NSF Registered H1 | 000000000 | 000000 |
| 2 | Synthetic | 2 fl. oz. | Tube | -30° to 500° | Nonmelting | White | NSF Registered H1 | 000000000 | 00000 |
| 2 | Synthetic | 8 fl. oz. | Tube | -30° to 500° | Nonmelting | White | NSF Registered H1 | 000000000 | 000000 |
| 2 | Synthetic | 14 fl. oz. | Grease Gun Cartridge | -30° to 500° | Nonmelting | White | NSF Registered H1 | 000000000 | 000000 |
Clean Room Grease
Highly pure and with no additives to contaminate sensitive environments, use this grease in clean rooms and electronic assembly workstations. It is nonconductive, chemically inert, and can withstand extreme temperature swings. This long-lasting grease also has an indefinite shelf life.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Grease lubricates most efficiently within the listed temperature range. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size, fl. oz. | Type | Electrical Properties | Dielectric Strength (Electric Field Strength) | Temp. Range, °F | Melting Temp., °F | Color | Each | |
Chemours Krytox™ EG 2000—PTFE Thickener | ||||||||||
| 2 | Synthetic | 2 | Tube | Electrical Insulating | 560V/mil | -30° to 550° | Nonmelting | White | 00000000 | 0000000 |
Seal and O-Ring Grease
Apply directly to seals and O-rings to extend service life by preventing drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter. Synthetic-oil-based grease lasts longer than mineral-oil-based grease and withstands a wider range of temperatures.
Grease with PTFE thickener has good heat, moisture, and oxidation resistance. Grease lubricates most efficiently within the listed temperature range. Chemours Krytox™ 240AC Type III resists most acids, bases, solvents, and fuels, and is long lasting with an indefinite shelf life.
Vacuum Seal and O-Ring Grease
A firm consistency and resistance to evaporation make this grease ideal for vacuum applications, such as flow meters, vacuum and pressure systems, and laboratory equipment. Apply directly to seals and O-rings to prevent drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste. NLGI 2 is about the consistency of peanut butter.
Grease with PTFE thickener resists aggressive acids, bases, and solvents. Chemours Krytox™ 240 grease is long lasting with an indefinite shelf life.
Grease lubricates most efficiently below the maximum temperature. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Container | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size, fl. oz. | Type | Temp. Range, °F | Melting Temp., °F | Maximum Vacuum @ Temperature | Color | Specifications Met | Each | |
Chemours Krytox™ 240AB Type II—PTFE Thickener | ||||||||||
| 2 | Synthetic | 1/2 | Tube | -40° to 450° | Not Rated | 5×10^-6 torr @ 100° F | White | MIL-PRF-27617 | 00000000 | 000000 |
| 2 | Synthetic | 2 | Tube | -40° to 450° | Not Rated | 5×10^-6 torr @ 100° F | White | MIL-PRF-27617 | 00000000 | 000000 |
Chemours Krytox™ 240AZ Type I—PTFE Thickener | ||||||||||
| 1 | Synthetic | 1/2 | Tube | -70° to 300° | Nonmelting | 4×10^-4 torr @ 100° F | White | MIL-PRF-27617 | 00000000 | 00000 |
| 1 | Synthetic | 2 | Tube | -70° to 300° | Nonmelting | 4×10^-4 torr @ 100° F | White | MIL-PRF-27617 | 00000000 | 000000 |
Clean Room Seal and O-Ring Grease
Highly pure, this grease is chemically inert, so it won’t contaminate sensitive environments or react with other substances. Due to its low vapor pressure, it resists evaporation, even at high temperatures. Apply directly to seals and O-rings to prevent drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Grease lubricates most efficiently below the maximum temperature. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Container | Each | |||||||
|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size, fl. oz. | Type | Temp. Range, °F | Melting Temp. | Color | Each | |
Chemours Krytox™ LVP—PTFE Thickener | ||||||||
| 2 | Synthetic | 2 | Tube | 5° to 570° | Nonmelting | White | 00000000 | 0000000 |
| 2 | Synthetic | 8 | Tube | 5° to 570° | Nonmelting | White | 00000000 | 000000 |
| 2 | Synthetic | 14 | Grease Gun Cartridge | 5° to 570° | Not Rated | White | 00000000 | 00000000 |
Bearing Grease
This grease is wear resistant for use in a wide range of bearing types.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Grease with PTFE thickener has good heat, moisture, and oxidation resistance. Grease with boron nitride thickener has excellent heat resistance and good moisture and oxidation resistance.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Chemours Krytox™ grease is long lasting with an indefinite shelf life. Krytox™ GPL grease is chemically inert and can be used with oxygen. Krytox™ XHT grease can be used at extremely high temperatures.
Container | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size, fl. oz. | Type | Temp. Range, °F | Melting Temp., °F | Color | Specifications Met | Each | |
Chemours Krytox™ GPL 202—PTFE Thickener | |||||||||
| 2 | Synthetic | 2 | Tube | -80° to 270° | Nonmelting | White | NSF Registered H1 | 00000000 | 000000 |
Chemours Krytox™ GPL 203—PTFE Thickener | |||||||||
| 2 | Synthetic | 2 | Tube | -75° to 310° | Nonmelting | White | NSF Registered H1 | 00000000 | 00000 |
| 2 | Synthetic | 8 | Tube | -75° to 310° | Nonmelting | White | NSF Registered H1 | 00000000 | 000000 |
| 2 | Synthetic | 14 | Grease Gun Cartridge | -75° to 310° | Not Rated | White | NSF Registered H1 | 00000000 | 000000 |
Chemours Krytox™ GPL 204—PTFE Thickener | |||||||||
| 2 | Synthetic | 2 | Tube | -60° to 355° | Nonmelting | White | __ | 00000000 | 00000 |
| 2 | Synthetic | 8 | Tube | -60° to 355° | Nonmelting | White | __ | 00000000 | 000000 |
| 2 | Synthetic | 14 | Grease Gun Cartridge | -60° to 355° | Not Rated | White | __ | 00000000 | 000000 |
Chemours Krytox™ GPL 205—PTFE Thickener | |||||||||
| 2 | Synthetic | 0.5 | Tube | -30° to 400° | Nonmelting | White | NSF Registered H1 | 00000000 | 00000 |
| 2 | Synthetic | 2 | Tube | -30° to 400° | Nonmelting | White | NSF Registered H1 | 00000000 | 00000 |
| 2 | Synthetic | 8 | Tube | -30° to 400° | Nonmelting | White | NSF Registered H1 | 00000000 | 000000 |
| 2 | Synthetic | 14 | Grease Gun Cartridge | -30° to 400° | Not Rated | White | NSF Registered H1 | 00000000 | 000000 |
Chemours Krytox™ XHT-AC—PTFE Thickener | |||||||||
| 2 | Synthetic | 2 | Tube | 0° to 570° | Nonmelting | White | __ | 000000000 | 00000 |
| 2 | Synthetic | 8 | Tube | 0° to 570° | Nonmelting | White | __ | 000000000 | 000000 |
| 2 | Synthetic | 14 | Grease Gun Cartridge | 0° to 570° | Nonmelting | White | __ | 000000000 | 000000 |
Chemours Krytox™ XHT-BDX—Boron Nitride Thickener | |||||||||
| 2 | Synthetic | 2 | Tube | 5° to 660° | Not Rated | White | __ | 00000000 | 000000 |
| 2 | Synthetic | 8 | Tube | 5° to 660° | Nonmelting | White | __ | 00000000 | 000000 |
| 2 | Synthetic | 14 | Grease Gun Cartridge | 5° to 660° | Nonmelting | White | __ | 00000000 | 00000000 |
Moisture-Resistant Bearing Grease
Made with moisture-resistant thickeners, this grease stays in place in wet environments. It is wear resistant for use in a wide range of bearings.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter. Synthetic-oil-based grease lasts longer than mineral-oil-based grease and generally withstands a wider range of temperatures. Grease with PTFE thickener has good heat and oxidation resistance.
Grease with sodium nitrite resists corrosive chemicals, handles extreme temperature swings, and is long lasting with an indefinite shelf life.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Container | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Specifications Met | Each | |
Chemours Krytox™ GPL 224—PTFE Thickener | ||||||||||
| 2 | Synthetic | Sodium Nitrite | 0.5 fl. oz. | Tube | -60° to 355° | Nonmelting | White | __ | 00000000 | 000000 |
| 2 | Synthetic | Sodium Nitrite | 2 fl. oz. | Tube | -60° to 355° | Nonmelting | White | __ | 00000000 | 00000 |
| 2 | Synthetic | Sodium Nitrite | 8 fl. oz. | Tube | -60° to 355° | Nonmelting | White | __ | 00000000 | 000000 |
| 2 | Synthetic | Sodium Nitrite | 14 fl. oz. | Grease Gun Cartridge | -60° to 355° | Nonmelting | White | __ | 00000000 | 000000 |
Chemours Krytox™ GPL 225—PTFE Thickener | ||||||||||
| 2 | Synthetic | Sodium Nitrite | 2 fl. oz. | Tube | -30° to 400° | Not Rated | White | NSF Registered H1 | 00000000 | 00000 |
| 2 | Synthetic | Sodium Nitrite | 8 fl. oz. | Tube | -30° to 400° | Not Rated | White | NSF Registered H1 | 00000000 | 000000 |
| 2 | Synthetic | Sodium Nitrite | 14 fl. oz. | Grease Gun Cartridge | -30° to 400° | Not Rated | White | NSF Registered H1 | 00000000 | 000000 |
Chemours Krytox™ GPL 226—PTFE Thickener | ||||||||||
| 2 | Synthetic | Sodium Nitrite | 0.5 fl. oz. | Tube | -30° to 500° | Not Rated | White | NSF Registered H1 | 000000000 | 00000 |
| 2 | Synthetic | Sodium Nitrite | 2 fl. oz. | Tube | -30° to 500° | Nonmelting | White | NSF Registered H1 | 000000000 | 00000 |
| 2 | Synthetic | Sodium Nitrite | 8 fl. oz. | Tube | -30° to 500° | Nonmelting | White | NSF Registered H1 | 000000000 | 000000 |
| 2 | Synthetic | Sodium Nitrite | 14 fl. oz. | Grease Gun Cartridge | -30° to 500° | Not Rated | White | NSF Registered H1 | 000000000 | 000000 |
Chemours Krytox™ GPL 227—PTFE Thickener | ||||||||||
| 2 | Synthetic | Sodium Nitrite | 0.5 fl. oz. | Tube | -20° to 550° | Nonmelting | White | NSF Registered H1 | 00000000 | 00000 |
| 2 | Synthetic | Sodium Nitrite | 2 fl. oz. | Tube | -20° to 550° | Nonmelting | White | NSF Registered H1 | 00000000 | 00000 |
| 2 | Synthetic | Sodium Nitrite | 8 fl. oz. | Tube | -20° to 550° | Nonmelting | White | NSF Registered H1 | 00000000 | 000000 |
| 2 | Synthetic | Sodium Nitrite | 14 fl. oz. | Grease Gun Cartridge | -20° to 550° | Not Rated | White | NSF Registered H1 | 00000000 | 000000 |
Chemical-Resistant Bearing Grease
Formulated to resist most chemicals and solvents, this grease keeps bearings lubricated in harsh environments.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Chemours Krytox™ GPL 207 is chemically inert, can be used with oxygen, handles extreme temperature swings, and is long lasting with an indefinite shelf life. The PTFE thickener reduces friction and helps the grease maintain lubricity.
Container | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size, fl. oz. | Type | Temp. Range, °F | Melting Temp., °F | Color | Specifications Met | Each | |
Chemours Krytox™ GPL 207—PTFE Thickener | |||||||||
| 2 | Synthetic | 0.5 | Tube | -20° to 550° | Nonmelting | White | NSF Registered H1 | 00000000 | 000000 |
| 2 | Synthetic | 2 | Tube | -20° to 550° | Nonmelting | White | NSF Registered H1 | 00000000 | 00000 |
| 2 | Synthetic | 8 | Tube | -20° to 550° | Nonmelting | White | NSF Registered H1 | 00000000 | 000000 |
| 2 | Synthetic | 14 | Grease Gun Cartridge | -20° to 550° | Nonmelting | White | NSF Registered H1 | 00000000 | 000000 |
Open Gear and Chain Grease
Tackier than gear box grease, this grease sticks to open gears and roller chain. It resists moisture for corrosion protection and can lubricate under heavy loads.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter. Synthetic-oil-based grease lasts longer than mineral-oil-based grease and withstands a wider range of temperatures.
Grease with PTFE thickener has good heat, moisture, and oxidation resistance.
Grease with moly (molybdenum disulfide) has excellent resistance to wear and can withstand high-load and high-pressure applications.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Chemours Krytox™ GPL 215 withstands high loads and pressure. It handles extreme temperature swings, resists aggressive chemicals, such as acids and oxygen, and is long lasting with an indefinite shelf life.
Container | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Each | |
Chemours Krytox™ GPL 215—PTFE Thickener | |||||||||
| 2 | Synthetic | Moly | 0.5 fl. oz. | Tube | -30° to 400° | Nonmelting | Black | 00000000 | 000000 |
| 2 | Synthetic | Moly | 2 fl. oz. | Tube | -30° to 400° | Nonmelting | Black | 00000000 | 00000 |
| 2 | Synthetic | Moly | 8 fl. oz. | Tube | -30° to 400° | Nonmelting | Black | 00000000 | 000000 |
| 2 | Synthetic | Moly | 14 fl. oz. | Grease Gun Cartridge | -30° to 400° | Not Rated | Black | 00000000 | 000000 |
Chemical-Resistant Oil
This oil is chemically inert and long lasting with an indefinite shelf life.
Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.
Food Industry Oil
Use this oil in food-processing and preparation areas.
Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.
Oil that is NSF Registered H1 and oil that is FDA Compliant 21 CFR 178.3570 are rated for incidental contact with food.
Synthetic oil lasts longer than mineral oil and withstands a wider range of temperatures.
Chemours Krytox™ GPL 105 handles extreme temperature swings, is chemically inert, and can be used with oxygen. It is long lasting with an indefinite shelf life.
Viscosity Grade | Container | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| ISO | AGMA | SAE | SSU Viscosity Grade | Size | Type | Temp. Range, °F | Color | With Detergent | Specifications Met | Each | |
Chemours Krytox™ GPL 105—Synthetic Base Oil | |||||||||||
| 150 | 4 | 40 | 825 @ 100° F | 9 fl. oz. | Bottle | -30° to 400° | Clear | No | NSF Registered H1 | 000000000 | 0000000 |
Vacuum Pump Oil
For long-lasting lubrication in vacuum pumps, this oil is slow to evaporate.
Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.
Chemours Krytox™ oil is chemically inert, can be used with oxygen, and is long lasting with an indefinite shelf life.
Viscosity Grade | Container | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| ISO | AGMA | SAE | SSU | Size | Type | Temp. Range, °F | Color | With Detergent | Each | |
Chemours Krytox™ 1506—Synthetic Base Oil | ||||||||||
| 22 | __ | 5W | 125 @ 100° F | 9 fl. oz. | Bottle | 15° to 210° | Clear | No | 0000000 | 0000000 |
Chemours Krytox™ 1514—Synthetic Base Oil | ||||||||||
| 46 | 1 | 20 | 250 @ 100° F | 9 fl. oz. | Bottle | 32° to 245° | Clear | No | 0000000 | 000000 |
Chemours Krytox™ 1525—Synthetic Base Oil | ||||||||||
| 68 | 2 | __ | 425 @ 100° F | 9 fl. oz. | Bottle | 50° to 280° | Clear | No | 0000000 | 000000 |