About Casters and Wheels
More
Cart-Smart Casters with Rubber Wheels
Offered in a variety of mounting plate sizes, these casters match many common carts and dollies.
Tread-on-core wheels have a core that is harder than the tread, balancing strength with cushioning.
Soft and firm wheels are shock absorbing and provide good traction on rough surfaces. Hard wheels are impact resistant and roll easily on smooth surfaces, but can be noisy and damaging to floors.
Casters with wheel brake apply pressure to the wheel to stop movement with a press of the foot pedal.
For technical drawings and 3-D models, click on a part number.
Wheel | |||||||
|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | Wheel Bearing Type | Each | |
Black Tread-on-Core Wheels—Firm | |||||||
| 2" | 1" | 2 1/2" | 90 | Durometer 90A | Without Bearing | 00000000 | 00000 |
| 2 1/2" | 1 1/8" | 3 3/16" | 100 | Durometer 90A | Without Bearing | 00000000 | 0000 |
Gray Solid Wheels—Hard | |||||||
| 2 1/2" | 1 1/8" | 3 3/16" | 200 | Durometer 75D | Without Bearing | 0000000 | 0000 |
Wheel | ||||||||
|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | Wheel Bearing Type | Swivel Construction | Each | |
Black Tread-on-Core Wheels—Firm | ||||||||
| 2" | 1" | 2 1/2" | 90 | Durometer 90A | Without Bearing | Kingpin | 00000000 | 00000 |
| 2 1/2" | 1 1/8" | 3 3/16" | 100 | Durometer 90A | Without Bearing | Kingpin | 00000000 | 00000 |
Gray Solid Wheels—Hard | ||||||||
| 2 1/2" | 1 1/8" | 3 3/16" | 200 | Durometer 75D | Without Bearing | Kingpin | 0000000 | 00000 |
Wheel | ||||||||
|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | Wheel Bearing Type | Swivel Construction | Each | |
Black Tread-on-Core Wheels—Soft | ||||||||
| 4" | 1 5/16" | 5" | 220 | Durometer 75A | Without Bearing | Kingpin | 0000000 | 000000 |
Black Tread-on-Core Wheels—Firm | ||||||||
| 2" | 1" | 2 1/2" | 90 | Durometer 90A | Without Bearing | Kingpin | 00000000 | 0000 |
| 2 1/2" | 1 1/8" | 3 3/16" | 100 | Durometer 90A | Without Bearing | Kingpin | 00000000 | 00000 |
Gray Solid Wheels—Hard | ||||||||
| 2 1/2" | 1 1/8" | 3 3/16" | 200 | Durometer 75D | Without Bearing | Kingpin | 0000000 | 00000 |
| 3" | 1 1/4" | 3 13/16" | 270 | Durometer 75D | Without Bearing | Kingpin | 0000000 | 00000 |
| 4" | 1 5/16" | 5" | 350 | Durometer 75D | Without Bearing | Kingpin | 0000000 | 00000 |
Mighty-Lite Casters with Rubber Wheels
These are our best general purpose casters in the lowest capacity range.
Tread-on-core wheels have a core that is harder than the tread, balancing strength with cushioning.
Soft and firm wheels are shock absorbing and provide good traction on rough surfaces.
Sleeve wheel bearings prevent wear to the wheel bore but don't roll as easily as other bearings.
Swivel casters have double-ball bearings for the smoothest swiveling. Casters with wheel brake apply pressure to the wheel to stop movement with a press of the foot pedal.
Add optional wheel brakes to prevent the caster from rolling.
For technical drawings and 3-D models, click on a part number.
Wheel | Wheel Bearing | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | Type | Material | Frame Material | Each | |
Rigid | |||||||||
Mounting Plate Style 4 | |||||||||
Black Tread-on-Core Wheels—Soft | |||||||||
| 2" | 7/8" | 2 3/4" | 90 | Durometer 70A | Sleeve | Iron | Zinc-Plated Steel | 0000000 | 00000 |
Swivel | |||||||||
Mounting Plate Style 4 | |||||||||
Black Tread-on-Core Wheels—Soft | |||||||||
| 2" | 7/8" | 2 3/4" | 90 | Durometer 70A | Sleeve | Iron | Zinc-Plated Steel | 0000000 | 0000 |
Swivel with Brake | |||||||||
Mounting Plate Style 4 | |||||||||
Black Tread-on-Core Wheels—Soft | |||||||||
| 2" | 7/8" | 2 3/4" | 90 | Durometer 70A | Sleeve | Iron | Zinc-Plated Steel | 0000000 | 00000 |
| Optional Wheel Brake for Swivel Casters with Mounting Plate Style 4 and 2" Dia. Wheels | 0000000 | Each | 00000 |
Tight-Quarters Casters with Rubber Wheels
Low mount heights and small mounting plates make these a good choice where space is limited.
Wheels have sleeve bearings to prevent wear to the wheel bore, but these don't roll as easily as other bearings. Casters have double-ball bearings for the smoothest swiveling.
Soft wheels are shock absorbing and provide good traction on rough surfaces. Hard wheels are impact resistant and roll easily on smooth surfaces, but can be damaging to floors.
Casters with wheel brake apply pressure to the wheel to stop movement with a press of the foot pedal.
For technical drawings and 3-D models, click on a part number.
Wheel | Wheel Bearing | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | Type | Material | Frame Material | Each | |
Swivel | |||||||||
Black Solid Wheels—Soft | |||||||||
| 2" | 15/16" | 2 5/8" | 70 | Durometer 80A | Sleeve | Nylon Plastic | Zinc-Plated Steel | 00000000 | 00000 |
| 2 1/2" | 15/16" | 3 3/32" | 90 | Durometer 80A | Sleeve | Nylon Plastic | Zinc-Plated Steel | 00000000 | 0000 |
Black Solid Wheels—Hard | |||||||||
| 2" | 15/16" | 2 5/8" | 90 | Durometer 80D | Sleeve | Nylon Plastic | Zinc-Plated Steel | 00000000 | 0000 |
| 2 1/2" | 15/16" | 3 3/32" | 100 | Durometer 80D | Sleeve | Nylon Plastic | Zinc-Plated Steel | 00000000 | 0000 |
Swivel with Brake | |||||||||
Black Solid Wheels—Soft | |||||||||
| 2" | 15/16" | 2 5/8" | 70 | Durometer 80A | Sleeve | Nylon Plastic | Zinc-Plated Steel | 00000000 | 0000 |
| 2 1/2" | 15/16" | 3 3/32" | 90 | Durometer 80A | Sleeve | Nylon Plastic | Zinc-Plated Steel | 00000000 | 0000 |
Black Solid Wheels—Hard | |||||||||
| 2" | 15/16" | 2 5/8" | 90 | Durometer 80D | Sleeve | Nylon Plastic | Zinc-Plated Steel | 00000000 | 0000 |
| 2 1/2" | 15/16" | 3 3/32" | 100 | Durometer 80D | Sleeve | Nylon Plastic | Zinc-Plated Steel | 00000000 | 0000 |
Creeper Casters with Metal Wheels
Often used on creeper stools, these have a smooth-rolling angled wheel that creates a low profile. Their steel wheels offer the strength and wear resistance you need for heavy loads and long life. They work well on smooth surfaces.
The wheel rides directly on the axle rather than on bearings, making this caster an economical choice for equipment not frequently moved.
They have completely sealed ball bearings for smooth swiveling and the best protection against dust and debris.
For technical drawings and 3-D models, click on a part number.
Wheel | Swivel Bearing | Swivel | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Wheel Bearing Type | Frame Material | Type | Seal Type | Each | |
Nonmarking Solid Steel Wheels—Hard | |||||||||
| 3" | 1/2" | 3" | 90 | Without Bearing | Steel | Ball | Sealed | 000000 | 000000 |
Low-Profile Casters with Metal Wheels
Stable and easy to turn, these casters have some of the lowest mount heights in their capacity range and offers better load distribution than single-wheel casters. Their iron wheels offer the strength and wear resistance you need for heavy loads and long life. They work well on smooth surfaces.
The wheels ride directly on the axle rather than on bearings, making this caster an economical choice for equipment not frequently moved.
Casters have ball bearings for smooth swiveling.
For technical drawings and 3-D models, click on a part number.
Wheel | Swivel | ||||||
|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Wheel Bearing Type | Frame Material | Each | |
Solid Zinc-Plated Steel Wheels—Hard | |||||||
| 2" | 9/16" | 2 1/2" | 600 | Without Bearing | Zinc-Plated Iron | 0000000 | 000000 |
Cart-Smart Casters with Metal Wheels
These casters match many common carts and dollies. Their iron wheels offer the strength and wear resistance you need for heavy loads and long life. They work well on smooth surfaces.
Swivel casters with ball bearings swivel smoothly.
Casters with wheel brake apply pressure to the wheel to stop movement with a press of the foot pedal.
For technical drawings and 3-D models, click on a part number.
Cart-Smart Casters with Polyurethane Wheels
These casters match many common carts and dollies. Wheels have a hard polypropylene core for strength with a polyurethane tread that combines the abrasion resistance of plastic with the shock-absorbing qualities of rubber. Use them on smooth or rough floors and in areas with debris.
The wheels have sleeve bearings to prevent wear to the wheel bore, but these don't roll as easily as other bearings.
Swivel casters have ball bearings for smooth swiveling. Casters with wheel brake apply pressure to the wheel to stop movement with a press of the foot pedal.
For technical drawings and 3-D models, click on a part number.
Wheel | Wheel Bearing | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | Type | Material | Frame Material | Each | |
Rigid | |||||||||
Red Tread-on-Core Wheels—Firm | |||||||||
| 2" | 3/4" | 2 1/2" | 100 | Durometer 95A | Sleeve | Acetal Plastic | Zinc-Plated Steel | 00000000 | 00000 |
Swivel | |||||||||
Red Tread-on-Core Wheels—Firm | |||||||||
| 2" | 3/4" | 2 1/2" | 100 | Durometer 95A | Sleeve | Acetal Plastic | Zinc-Plated Steel | 00000000 | 0000 |
Swivel with Brake | |||||||||
Red Tread-on-Core Wheels—Firm | |||||||||
| 2" | 3/4" | 2 1/2" | 100 | Durometer 95A | Sleeve | Acetal Plastic | Zinc-Plated Steel | 00000000 | 00000 |
Low-Profile Casters with Polyurethane Wheels
These casters have some of the lowest mount heights in their capacity range. They have abrasion-resistant polyurethane wheels. Use them on smooth or rough floors and in areas with debris.
Dual-wheel casters provide better load distribution and easier turning than single-wheel casters.
Hard wheels are impact resistant.
Casters with ball bearings are the easiest to roll. Swivel casters with double-ball bearings have the smoothest swiveling.
Shielded bearings protect from dust and debris. Sealed bearings are completely sealed for the best protection against dust and debris.
For technical drawings and 3-D models, click on a part number.
Wheel | Wheel Bearing | Swivel Bearing | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | No. of | Mount Ht. | Cap. per Caster, lbs. | Hardness | Type | Seal Type | Material | Frame Material | Type | Seal Type | Each | |
Mounting Plate Style 1 | |||||||||||||
Nonmarking Blue Solid—Hard | |||||||||||||
| 2 1/2" | 1" | 2 | 3 3/8" | 500 | Durometer 75D | Ball | Shielded | Steel | 301 Stainless Steel | Double Ball | Sealed | 0000000 | 000000 |
Cart-Smart Casters with Polypropylene Wheels
Offered in a variety of mounting plate sizes, these casters match many common carts and dollies. They have lightweight polypropylene wheels that roll well on smooth surfaces.
Wheels ride directly on the axle rather than on bearings, making these casters an economical choice for equipment not frequently moved.
Hard wheels are more impact resistant than firm wheels.
Swivel casters have ball bearings for easy swiveling. Casters with wheel brake apply pressure to the wheel to stop movement with a press of the foot pedal.
For technical drawings and 3-D models, click on a part number.
Wheel | Mount. Plate | |||||||
|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | Lg. | Wd. | Each | |
Black Solid Wheels—Hard | ||||||||
| 2 1/2" | 1 1/8" | 3 3/16" | 200 | Durometer 60D | 4 7/16" | 2 1/4" | 0000000 | 00000 |
Wheel | Mount. Plate | |||||||
|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | Lg. | Wd. | Each | |
Black Solid Wheels—Hard | ||||||||
| 2 1/2" | 1 1/8" | 3 3/16" | 200 | Durometer 60D | 3 13/16" | 2 3/4" | 0000000 | 00000 |
Wheel | Mount. Plate | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | Lg. | Wd. | Brake Location | Each | |
Black Solid Wheels—Hard | |||||||||
| 2 1/2" | 1 1/8" | 3 3/16" | 200 | Durometer 60D | 3 13/16" | 2 3/4" | Left Side | 0000000 | 000000 |
| 3" | 1 1/4" | 3 13/16" | 270 | Durometer 60D | 4 1/8" | 3 1/8" | Left Side | 0000000 | 00000 |
| 4" | 1 5/16" | 5" | 350 | Durometer 60D | 5 1/8" | 4" | Left Side | 0000000 | 00000 |
Black Powder-Coated Steel Casters with Polypropylene Wheels
The steel frame has a black powder-coated finish to blend in with your equipment. They have lightweight polypropylene wheels that roll well on smooth surfaces.
Wheels ride directly on the axle rather than on bearings, making these casters an economical choice for equipment not frequently moved.
Swivel casters have double-ball bearings for the smoothest swiveling.
For technical drawings and 3-D models, click on a part number.
Wheel | Frame | Swivel | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | Wheel Bearing Type | Material | Color | Each | |
Nonmarking Black Solid Wheels—Hard | |||||||||
| 2 1/2" | 1 1/8" | 3 5/16" | 200 | Durometer 60D | Without Bearing | Powder-Coated Steel | Black | 00000000 | 000000 |
Low-Profile Casters with Phenolic Wheels
Stable and easy to turn, these casters have the lowest mount height in its capacity range. Their dual-wheel design offers better load distribution than single-wheel casters. They have nonmarking phenolic wheels that roll best on smooth surfaces.
Wheels ride directly on the axle rather than on bearings making these casters an economical choice for equipment not frequently moved. Double-ball bearings provide the smoothest swiveling and are completely sealed for the best protection against dust and debris.
For technical drawings and 3-D models, click on a part number.
Wheel | Swivel | |||||||
|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | Wheel Bearing Type | Frame Material | Each | |
Nonmarking Black Solid Wheels—Hard | ||||||||
| 2 1/2" | 1" | 3 3/8" | 500 | Durometer 95D | Without Bearing | 301 Stainless Steel | 0000000 | 000000 |
Static-Control Plate Casters
The wheels dissipate static to protect sensitive electronic equipment from electrostatic discharge. Wheels are rubber for shock absorption.
Sleeve wheel bearings prevent wear to the wheel bore.
Swivel casters have double-ball bearings for the smoothest swiveling. Casters with wheel brake apply pressure to the wheel to stop movement with a press of the foot pedal.
For technical drawings and 3-D models, click on a part number.
Wheel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Electrical Properties | Surface Resistivity, ohms/sq. | Wheel Bearing Type | Wheel Bearing Seal Type | Each | |
Swivel | |||||||||
Black Solid Wheels—Soft | |||||||||
| 2" | 15/16" | 2 5/8" | 70 | Static Dissipative | 106 | Sleeve | Open | 0000000 | 00000 |
| 2 1/2" | 7/8" | 3 3/32" | 90 | Static Dissipative | 106 | Sleeve | Open | 0000000 | 0000 |
Swivel with Brake | |||||||||
Black Solid Wheels—Soft | |||||||||
| 2" | 15/16" | 2 5/8" | 70 | Static Dissipative | 106 | Sleeve | Open | 0000000 | 0000 |
| 2 1/2" | 7/8" | 3 3/32" | 90 | Static Dissipative | 106 | Sleeve | Open | 0000000 | 00000 |
Edge-Mount Bracket Casters
Mount these casters to the bottom edge of equipment to keep them out of sight. They have a lightweight polypropylene wheel that rides directly on the axle making these casters an economical option for equipment on smooth surfaces that is not frequently moved.
For technical drawings and 3-D models, click on a part number.
Wheel | Mounting Plate | Rigid | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | No. of Mounting Holes | Lg. | Wd. | Dp. | Mounting Hole Ctr.-to-Ctr. Wd. | For Screw Size | Frame Material | Each | |
Nonmarking Black Solid Polypropylene Plastic Wheels—Hard | |||||||||||||
| 2" | 7/8" | 1/2" | 100 | Durometer 70D | 3 | 1 3/4" | 2 1/4" | 0.625" | 1 13/16" | 1/8" | Zinc-Plated Steel | 0000000 | 00000 |
Side-Mount Bracket Casters
Mount these casters to the side of equipment or on gates and doors. They are spring-loaded for good shock absorption.
Tread-on-core wheels have a polypropylene core that is harder than the tread, balancing strength with cushioning.
Rubber wheels provide good traction on rough surfaces.
Sleeve wheel bearings prevent wear to the wheel bore but don't roll as easily as other bearings. Ball wheel bearings are the easiest to roll.
Casters have double-ball swivel bearings for the smoothest swiveling.
For technical drawings and 3-D models, click on a part number.
Wheel | Mounting Plate | Wheel Bearing | Swivel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | No. of Mount. Holes | Lg. | Wd. | For Screw Size | Max. Compression Force, lbs. | Deflection @ Max. Cap. | Type | Seal Type | Frame Material | Each | |
Nonmarking Gray Tread-on-Core Rubber Wheels—Soft | |||||||||||||||
| B | 2" | 11/16" | 2 11/16" | 80 | 6 | 2 3/8" | 2" | 3/16" | 35 | 7/8" | Ball | Open | Zinc-Plated Steel | 00000000 | 000000 |
Black Solid Rubber Wheels—Firm | |||||||||||||||
| C | 2" | 7/8" | 2 3/4" | 100 | 1 4 | 5 1/4" | 2" | 1/2" 5/16" | 100 | 1 3/4" | Sleeve | Open | Zinc-Plated Steel | 00000000 | 00000 |
Inside-Mount Bracket Casters
The 90° angle bracket mounts into square tubing and can also be bolted to angle iron. The rubber wheels are shock absorbing and provide good traction on rough surfaces. Sleeve wheel bearings prevent wear to the wheel bore but don't roll as easily as other bearings. Casters have double-ball swivel bearings for the smoothest swiveling.
For technical drawings and 3-D models, click on a part number.
Wheel | Mounting Plate | Wheel Bearing | Swivel Bearing | Swivel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | Lg. | Wd. | Mounting Hole Ctr-to-Ctr Lg. | For Screw Size | Type | Seal Type | Frame Material | Type | Seal Type | Each | |
Black Solid Rubber Wheels—Soft | |||||||||||||||
| 2" | 7/8" | 2 3/4" | 70 | Durometer 80A | 2 1/16" | 1 3/16" | 1 1/4" | 1/4" | Sleeve | Open | Zinc-Plated Steel | Double Ball | Open | 000000 | 000000 |
Black Solid Rubber Wheels—Firm | |||||||||||||||
| 2" | 7/8" | 2 3/4" | 100 | Durometer 90A | 2 1/16" | 1 3/16" | 1 1/4" | 1/4" | Sleeve | Open | Zinc-Plated Steel | Double Ball | Open | 000000 | 00000 |