We will reply to your message within an hour.
Secure circuit breaker switches that don’t have a hole for a padlock.
Lockout works with most 120V AC circuit breakers that have a hole through the breaker lever.
Suitable for most major multipole breakers that have a tie bar, including GE, ITE, Sylvania, Challenger, Bryant, Westinghouse, Square D, and General Switch Co.
Secure a single breaker switch with multiple padlocks, so electricity stays safely off until everyone's done working.
Use the thumb wheel to install this lockout on circuit breakers with tie bars that are mounted on DIN rails.
Use the push-button end to easily install this lockout on circuit breakers with pin lockout holes on the outside of the circuit-breaker toggle switch that are mounted on DIN rails.
Use the push-button end to easily install these lockouts on circuit breakers with pin lockout holes on the inside of the circuit-breaker toggle switch that are mounted on DIN rails.
Stop gas and fluid valve handles from opening and closing during maintenance.
In addition to a hasp that interlocks when closed, lockout has an adapter to lock out a valve and a chain that attaches to equipment so it won't get lost.
A hinged design makes mounting these lockouts easy.
Each lockout rotates into itself, making installation in tight spaces easier than other lockouts.
Use these lockouts to prevent valve handles from turning.
Close your valve, remove the handle, and store the handle in the lockout's zippered pouch. The lockout fits around the pipe, covers the valve stem, and secures the pouch's zipper to prevent valve operation.
Lock out a single energy control on machinery and electrical equipment so it can't be used.
Lockouts come in different colors for easy identification and to help meet OSHA standards. The label is permanently attached to record employee name and department.
Made entirely from nonconductive plastic for excellent electrical insulation.
Like two lockout hasps in one, there's a jaw at each end with different clearances for added versatility.
Same as our other low-profile lockout hasps, but with an attached label to record employee name and department.
These have a chain to attach to equipment so they won't get lost.
With a smaller overall length, these lockout hasps fit in tighter spaces than other lockout hasps yet still hold a similar number of locks.
The overlapping hasp interlocks when closed for added security.
The fold-over closing design hinders prying.
The fold-over closing design hinders prying, while a slot instead of holes makes it easy to install multiple padlocks.
In addition to an overlapping hasp that interlocks when closed, lockouts have a chain that attaches to equipment so they won't get lost.
Place a plug into the cylinder and padlock so the plug can't be used.
These lockouts plug into standard two- and three-prong plugs and lock with keys so the plug can't be used.
After locking, pull the cable tight for a secure fit.
Extend the cable and place its loop in the body opening. Rotate the body to lock the cable for a secure fit. When unlocked, the cable retracts into the body with the push of a button.
Thread the free end of the cable through the looped end and into the lockout clamping hole; pull tight and close handle to pinch the cable for a secure fit.
Lock out a machine with fewer padlocks when a team is working.
Mount near machines your team is repairing to lock them out with fewer padlocks.
Carry these boxes from job to job and mount them near equipment to lock out valves, electrical controls, and other machines with fewer padlocks, saving your team time.
Mount this lockout over toggle- and rocker-style wall switches to make the switch inaccessible.
Lock out the on/off or emergency-stop buttons on machinery to prevent accidental or unauthorized startups, such as during maintenance.
Isolate air-powered equipment from a compressed air source.
Lock out hoist controls, large electrical connectors, and other odd-sized controls.
Padlock these lockouts over the ends of battery cables to keep forklifts, pallet jacks, and other machinery powered off during maintenance.
Prohibit access to the main valve on a gas cylinder.
Prevent cranes, hoists, and other machinery controlled by pendant switches from starting up during maintenance.
Lock pipe blinds in place to prevent gas, steam, or chemicals from flowing through your line. These lockouts block access to flange bolts, keeping your team safe during pipeline maintenance.
Sets contain items for group electrical and valve lockouts and are furnished in a yellow plastic case that mounts to the wall to keep the items organized in a central location.
Sets come with red padlocks and hasps, as well as tags and a waist pouch.
Sets contain items for group lockouts and are furnished in a yellow plastic case that mounts to the wall to keep the items organized in a central location.
Sets include a variety of electrical and valve lockouts as well as padlocks.
Keep padlocks, tags, and other lockout tools neatly stored and ready for use in these easy-to-spot stations.
Store all of your lockout safety procedure forms in one place. These stations hold binders that you fill with one form for each piece of equipment that lists required lockouts.
Locks have a vertical shackle clearance that's greater than 1” and include a Danger label as well as a write-on label marked Property of. Padlocks come in a variety of colors for lockout identification compliance. Choose these locks if you need locks that each open with a different key.
Padlocks come in a variety of colors for lockout identification compliance. Choose these locks if you need locks that each open with a different key.
All external parts are plastic, making these locks nonconductive, nonsparking, and nonmagnetic. Locks include a Danger label as well as a write-on label marked Property of. They come in a variety of colors for lockout identification compliance. Choose these locks if you need locks that each open with a different key.
Vertical shackle clearance is greater than 1”. Padlocks come in a variety of colors for lockout identification compliance. Choose these locks if you need locks that each open with a different key.
For added security, locks have specially designed keys that cannot be duplicated and cannot be removed when the lock is open.
In addition to a vertical shackle clearance that's greater than 1”, these locks have specially designed keys that cannot be duplicated and cannot be removed when the lock is open.
Locks have a vertical shackle clearance that's greater than 1" and include a Danger label as well as a write-on label marked Property of. Padlocks come in a variety of colors for lockout identification compliance. Choose these locks if you need several locks that open with the same key.
Padlocks come in a variety of colors for lockout identification compliance. Choose these locks if you need several locks that open with the same key.
All external parts are plastic, making these locks nonconductive, nonsparking, and nonmagnetic. Locks include a Danger label as well as a write-on label marked Property of. They come in a variety of colors for lockout identification compliance. Choose these locks if you need several locks that open with the same key.
Vertical shackle clearance is greater than 1". Padlocks come in a variety of colors for lockout identification compliance. Choose these locks if you need several locks that open with the same key.
Locks have a vertical shackle clearance that's greater than 1" and include a Danger label as well as a write-on label marked Property of. Padlocks come in a variety of colors for lockout identification compliance. Choose these locks if you want individual locks or groups of locks that open with their own key, but also open with a master key.
Padlocks come in a variety of colors for lockout identification compliance. Choose these locks if you want individual locks or groups of locks that open with their own key, but also open with a master key.
Vertical shackle clearance is greater than 1". Padlocks come in a variety of colors for lockout identification compliance. Choose these locks if you want individual locks or groups of locks that open with their own key, but also open with a master key.
This master keyed set includes eight different-color padlocks that open with a specific key number and a master key that opens all of the padlocks. The different-color padlocks are for lockout identification compliance.
Replace individual and get master padlock keys.
Secure tools and equipment with any style of padlock.
Remind workers to use lockout devices and procedures to prevent unexpected machine startups during maintenance and repair work.
Sign and date these tags and then seal the laminating flap to protect the text from smudging and wear.
Add a photo in the self-laminating square to identify the employee working a job.
Keep detailed records for lockout/tagout procedures and list employees authorized to perform maintenance for a machine or group of machines.
Designed for use in the food industry, these tags remind workers to use lockout devices and procedures to prevent unexpected machine startups during maintenance and repair work while reducing the risk of contaminating the food.
Use these tags to describe equipment and lockout/tagout procedures.
Tags are laminated in plastic so they hold up outdoors.
Write a message and then seal the laminating flap to protect the text from smudging and wear.
Communicate dangers to workers near equipment that could cause injury.
Specify the printed message you'd like to appear under the header.
Create a permanent home for keeping frequently used tags handy.
Wrap these labels around padlocks to comply with lockout/tagout procedures.
Add a photo in the designated square to identify the employee working a job.
Prevent injuries from unexpected machine startups during maintenance and repair—these labels remind you to lock out equipment.
Add lockout symbols to an existing label or use alone to provide lockout reminders at a glance.
The headers and illustrations on these labels help workers identify lockout reminders at a glance.
Identify hazards and unsafe practices that can injure workers around conveying equipment. These labels meet or exceed Conveyor Equipment Manufacturers Association standards and have headers that meet OSHA/ANSI standards for indicating hazards.
Attach these labels to hard hats to provide safety reminders or to identify first-aid personnel.
Define lockout and tagout procedures to help prevent unexpected startups during machine maintenance and repair work.
Communicate hand signals for directing crane operation.
Remind employees to wash hands before returning to work.
Mark your lockout station with a sign that employees will see from anywhere in the room.
Remind your team to lock out machines during maintenance work to avoid accidental startups.
Cover a steering wheel to communicate when equipment is out of service.
Warn against forklift traffic, mark pedestrian crossings, and provide safety reminders to drivers.
These signs can be read when viewed in a rearview mirror.
The illustrations on these signs help you identify electrical hazards at a glance.
Notify workers of electrical hazards such as arc flashes, buried cable, and high-voltage equipment.
Identify confined spaces that require authorized permit-only entry.
Communicate dangers to workers near moving equipment that could cause injury.
Clearly define dangerous areas such as construction zones and welding areas to restrict access to only authorized personnel.
Help prevent accidents in areas with slippery floors, tripping hazards, or low headroom.
Designate areas that require personal protective equipment such as safety glasses and earmuffs.
The illustrations on these signs help workers identify restricted areas at a glance.
Alert workers to the presence of chemicals, combustible liquids and gases, and other hazardous materials.
To prevent accidental start-up, these valves can be locked in their off position with a padlock. They create one action, such as extending a cylinder.
Because they require a key to operate, you can limit who is able to adjust these valves. They create one action, such as extending a cylinder.
Because they require a key to operate, you can limit who is able to adjust these valves. They create two actions and have two exhaust ports, which allows you to control the speed of each action by attaching a flow control valve to each exhaust port. Also known as 4-way and 5/2 valves.
Prevent accidental start-up when servicing equipment.
Includes technical, machinery, and electrical code handbooks as well as occupational safety manuals and field reference books.
Includes digital handbooks and video programs on OSHA's lockout/tagout procedures.
Block the rungs on a ladder with these lockout signs to prevent unauthorized climbing.
Attach garden hose to the valve outlet. Use with water. These valves gradually open and close to adjust and regulate flow.