Loctite EA | McMaster-Carr

Filter by

Container Type

For Use On

For Joining

Color

Manufacturer Model Number

Fitting Connection

Begins to Harden

Container Size

Mix Ratio

Type

Consistency

Clarity

Maximum Temperature

Reaches Full Strength

Viscosity

10,000 cP to 19,999 cP

20,000 cP to 99,999 cP

100,000 cP to 299,999 cP

300,000 cP or greater

Cartridge Size

RoHS

DFARS Specialty Metals

Exempt

REACH

Compliant

Not Compliant

Export Control Classification Number (ECCN)

EAR99

Manufacturer Model Name

Fixmaster Epoxy

Fixmaster Metal Magic Steel

Fixmaster Poxy Pak™

Fixmaster Stainless Steel Putty

Fixmaster Steel Liquid

Fixmaster Steel Putty

Fixmaster Superior Metal

Fixmaster Underwater Repair Epoxy

Peel Strength

Minimum Temperature

Elongation

Applicator Type

70 Products

About Structural Adhesives

About Paint and Protective Coatings

Epoxy Structural Adhesives

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

9460 and E-20NS are nonsagging, so they won't drip from vertical or overhead surfaces. 9460 bonds dissimilar materials.

Loctite® Adhesives

	Container				Strength
Mfr. Model No.	Size	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
11C	4 fl. oz.	Tube	20 min.	72 hrs.	2,270	Not Rated	2.5:1	Paste (367,850 cP)	-65° to 300°	Black	Metal, Plastic, Rubber	00000000	000000
1C	4 fl. oz.	Tube	20 min.	72 hrs.	1,500	Not Rated	2.5:1	Paste (350,000 cP)	-65° to 300°	Off-White	Metal, Plastic, Rubber, Wood	00000000	00000
1C-LV	1.69 fl. oz.	Cartridge	20 min.	72 hrs.	2,100	Not Rated	2:1	Thick Liquid (66,750 cP)	-65° to 250°	Beige	Metal, Plastic, Rubber	0000000	00000
615	3.2 fl. oz.	Tube	10 min.	24 hrs.	3,825	Not Rated	1:1	Paste (200,000 cP)	-65° to 180°	Light Blue	Metal, Plastic, Rubber	00000000	00000
9460	1.69 fl. oz.	Cartridge	50 min.	72 hrs.	3,500	30	1:1	Paste (200,000 cP)	-65° to 250°	Gray	Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber	00000000	00000
9460	2.5 gal.	Can	50 min.	72 hrs.	3,500	30	1:1	Paste (200,000 cP)	-65° to 250°	Gray	Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber	00000000	000000
9460	6.76 fl. oz.	Cartridge	50 min.	72 hrs.	3,500	30	1:1	Paste (200,000 cP)	-65° to 250°	Gray	Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber	00000000	00000
E-20NS	1.69 fl. oz.	Cartridge	20 min.	24 hrs.	2,790	Not Rated	2:1	Thick Liquid (60,000 cP)	-65° to 250°	Beige	Metal, Plastic, Rubber	0000000	00000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 6.76 fl. oz. and 13.5 fl. oz. Loctite® Cartridges	0000000	00000
Mixer Nozzle for 1.69 fl. oz. Cartridges	00000000	0000
Air-Powered Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges	000000000	000000
Dispensing Gun for 1.69 fl. oz. Cartridges	00000000	00000
Dispensing Gun for 6.76 fl. oz. Loctite® Cartridges	0000000	000000

Optically Clear Epoxy Structural Adhesives

For invisible bond lines, these adhesives dry clear. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an epoxy that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.

The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

0151 and E-30CL are suitable for fiber-optic applications.

E-05CL is toughened to form resilient, impact-resistant bonds on dissimilar materials. It's suitable for use on fiber-optic components.

E-05MR has good moisture resistance. It's toughened to form resilient, impact-resistant bonds on dissimilar materials.

Loctite® Adhesives

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	For Joining		Each
0151	1.69	Cartridge	60 min.	24 hrs.	2,675	Not Rated	2.7:1	Thick Liquid (60,000 cP)	-65 to 160° F	Metal, Plastic, Rubber, Glass	00000000	000000
0151	3.3	Tube	60 min.	24 hrs.	2,675	Not Rated	2.7:1	Thick Liquid (60,000 cP)	-65 to 160° F	Metal, Plastic, Rubber, Glass	00000000	00000
0151	41.6	Can	60 min.	24 hrs.	2,675	Not Rated	2.7:1	Thick Liquid (60,000 cP)	-65 to 160° F	Metal, Plastic, Rubber, Glass	00000000	000000
608	1.69	Cartridge	5 min.	24 hrs.	2,980	Not Rated	1:1	Paste (100,000 cP)	-65 to 130° F	Metal, Plastic, Rubber	0000000	00000
608	2.8	Tube	5 min.	24 hrs.	2,980	Not Rated	1:1	Paste (100,000 cP)	-65 to 130° F	Metal, Plastic, Rubber	00000000	00000
D609	1.69	Cartridge	5 min.	24 hrs.	1,800	Not Rated	1:1	Thick Liquid (15,000 cP)	-65 to 180° F	Metal, Plastic, Rubber	00000000	00000
E-05CL	1.69	Cartridge	3 min.	24 hrs.	1,430	Not Rated	1:1	Thick Liquid (2,500 cP)	-65 to 180° F	Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber	0000000	00000
E-05MR	1.69	Cartridge	5 min.	24 hrs.	3,380	Not Rated	1:1	Thick Liquid (25,000 cP)	-65 to 250° F	Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber	0000000	00000
E-30CL	1.69	Cartridge	30 min.	24 hrs.	3,100	Not Rated	2:1	Thick Liquid (10,000 cP)	-65 to 250° F	Metal, Plastic, Ceramic, Glass	0000000	00000
E-30CL	6.76	Cartridge	30 min.	24 hrs.	3,100	Not Rated	2:1	Thick Liquid (10,000 cP)	-65 to 250° F	Metal, Plastic, Ceramic, Glass	0000000	00000
M-31CL	1.69	Cartridge	30 min.	24 hrs.	3,100	Not Rated	2:1	Thick Liquid (6,000 cP)	-65 to 300° F	Metal, Plastic, Rubber, Glass	0000000	00000

Adhesives with Ten Mixing Sticks

	Container				Strength
Mfr. Model No.	Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	For Joining	Pkg. Qty.		Pkg.
Loctite® Adhesives
608	0.14	One-Time-Use Packet	5 min.	24 hrs.	2,980	Not Rated	1:1	Paste (100,000 cP)	-65° to 130°	Metal, Plastic, Rubber	10	00000000	000000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 1.69 fl. oz. Loctite® Cartridges	00000000	00000
Mixer Nozzle for 6.76 fl. oz. Loctite® Cartridges	0000000	0000
Dispensing Gun for 1.69 fl. oz Loctite® Cartridges	00000000	00000
Dispensing Gun for 6.76 fl. oz. Loctite® Cartridges	0000000	000000
Air-Powered Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges	000000000	000000

Toughened Epoxy Structural Adhesives

Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds. The most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.

The size listed is the combined total of the two parts. Use with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

DP420NS, DP460NS, E-40HT, and 9462 are nonsagging, so they won't drip from vertical or overhead surfaces.

E-40FL and E-90FL bond dissimilar materials.

Loctite® Adhesives

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
E-20HP	1.69	Cartridge	20 min.	24 hrs.	3,270	Not Rated	2:1	Thick Liquid (30,000 cP)	-25° to 250°	Off-White	Metal, Plastic	0000000	000000
E-20HP	6.76	Cartridge	20 min.	24 hrs.	3,270	Not Rated	2:1	Thick Liquid (30,000 cP)	-25° to 250°	Off-White	Metal, Plastic	0000000	00000
E-20HP	13.5	Cartridge	20 min.	24 hrs.	3,270	Not Rated	2:1	Thick Liquid (37,000 cP)	-25° to 250°	Off-White	Metal, Plastic	0000000	000000
E-40FL	1.69	Cartridge	40 min.	24 hrs.	640	Not Rated	1:1	Thick Liquid (70,000 cP)	-25° to 250°	Gray	Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Plastic to Masonry, Rubber, Rubber to Glass, Rubber to Masonry, Ceramic, Glass, Masonry, Wood, Wood to Glass	0000000	00000
E-40FL	6.76	Cartridge	40 min.	24 hrs.	640	Not Rated	1:1	Thick Liquid (70,000 cP)	-25° to 250°	Off-White	Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Plastic to Masonry, Rubber, Rubber to Glass, Rubber to Masonry, Ceramic, Glass, Masonry, Wood, Wood to Glass	0000000	00000
E-40FL	13.5	Cartridge	40 min.	24 hrs.	640	Not Rated	1:1	Thick Liquid (70,000 cP)	-25° to 250°	Off-White	Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Plastic to Masonry, Rubber, Rubber to Glass, Rubber to Masonry, Ceramic, Glass, Masonry, Wood, Wood to Glass	0000000	000000
E-40HT	1.69	Cartridge	40 min.	24 hrs.	4,030	Not Rated	2:1	Paste (430,000 cP)	-65° to 300°	Off-White	Metal, Plastic, Rubber	0000000	00000
E-60HP	1.69	Cartridge	60 min.	24 hrs.	4,320	Not Rated	2:1	Thick Liquid (45,000 cP)	-25° to 250°	Off-White	Metal, Plastic, Rubber	0000000	00000
E-60HP	13.5	Cartridge	60 min.	24 hrs.	4,320	Not Rated	2:1	Thick Liquid (45,000 cP)	-25° to 250°	Off-White	Metal, Plastic, Rubber	0000000	000000
E-90FL	1.69	Cartridge	90 min.	24 hrs.	810	Not Rated	1:1	Thick Liquid (40,000 cP)	-25° to 250°	Gray	Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Plastic to Masonry, Rubber, Rubber to Glass, Rubber to Masonry, Ceramic, Glass, Masonry, Wood, Wood to Glass	0000000	00000
E-90FL	13.5	Cartridge	90 min.	24 hrs.	810	Not Rated	1:1	Thick Liquid (40,000 cP)	-25° to 250°	Off-White	Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Plastic to Masonry, Rubber, Rubber to Glass, Rubber to Masonry, Ceramic, Glass, Masonry, Wood, Wood to Glass	0000000	000000
9462	1.69	Cartridge	55 min.	72 hrs.	4,180	22	1:1	Thick Liquid (70,000 cP)	-65° to 250°	Beige	Metal, Plastic, Rubber	0000000	00000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 1.69 fl. oz. Cartridges	00000000	00000
Mixer Nozzle for 6.76 fl. oz. E-20HP Loctite® Cartridges	0000000	0000
Air-Powered Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges	000000000	000000
Dispensing Gun for 1.69 fl. oz. Cartridges	00000000	00000
Dispensing Gun for 6.76 fl. oz. E-20HP Loctite® Cartridges	0000000	000000

Epoxy Structural Adhesives for Harsh Environments

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions. Epoxies are the strongest structural adhesives. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.

The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

E-120HP resists acetone, fuel, and oil. It bonds dissimilar materials and withstands rapid changes in temperature.

9430 bonds dissimilar materials and resists fuel and hydraulic fluid.

Mfr. Model	Container				Strength
No.	Size	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	Environment	For Joining		Each
Loctite® Adhesives
E-120HP	1.69 fl. oz.	Cartridge	2 hrs.	24 hrs.	4,300	Not Rated	2:1	Thick Liquid (30,000 cP)	-65° to 250°	Amber	Corrosive, Salt Spray, Submersible	Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber, Ceramic	0000000	000000
E-120HP	6.76 fl. oz.	Cartridge	2 hrs.	24 hrs.	4,300	Not Rated	2:1	Thick Liquid (30,000 cP)	-65° to 250°	Amber	Corrosive, Salt Spray, Submersible	Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber, Ceramic	0000000	00000
E-120HP	13.5 fl. oz.	Cartridge	2 hrs.	24 hrs.	4,300	Not Rated	2:1	Thick Liquid (30,000 cP)	-65° to 250°	Amber	Corrosive, Salt Spray, Submersible	Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber, Ceramic	0000000	000000
9430	32 fl. oz.	Can	50 min.	5 days	4,230	60	3.78:1	Thick Liquid (12,000 cP)	-65° to 180°	Off-White	Corrosive, Salt Spray, Submersible	Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber	00000000	000000
9430	1.25 gal.	Can	50 min.	5 days	4,230	60	3.78:1	Thick Liquid (12,000 cP)	-65° to 180°	Off-White	Corrosive, Salt Spray, Submersible	Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber	00000000	000000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 1.69 fl. oz. Cartridges	00000000	00000
Mixer Nozzle for 6.76 fl. oz. and 13.5 fl. oz. Cartridges	0000000	0000
Replacement Plunger for 13.5 fl. oz. Cartridges (2:1 Mix Ratio)	00000000	0000
Air-Powered Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges	000000000	000000
Dispensing Gun for 1.69 fl. oz. Cartridges	00000000	00000
Dispensing Gun for 6.76 fl. oz. Cartridges	0000000	000000
Dispensing Gun for 13.5 fl. oz. Cartridges	0000000	000000

Slow-Set Epoxy Structural Adhesives

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.

The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

M-121HP bonds dissimilar materials and withstands rapid changes in temperature.

Loctite® Adhesives

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Specifications Met	For Joining		Each
9340	2.7	Tube	90 min.	24 hrs.	2,300	Not Rated	1:1	Paste (Not Rated)	-65° to 180°	__	Metal, Plastic, Rubber	00000000	000000
M-121HP	1.69	Cartridge	2 hrs.	24 hrs.	4,800	Not Rated	2:1	Thick Liquid (11,000 cP)	-65° to 300°	ISO 10993	Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Ceramic, Glass	0000000	00000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 1.69-oz. Cartridges	00000000	00000
Air-Powered Dispensing Gun for 1.69-oz. Loctite® Cartridges	000000000	000000
Dispensing Gun for 1.69-oz. Cartridges	00000000	00000

Low-Odor Epoxy Structural Adhesives

Bond most materials without the strong odor of other epoxy adhesives. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.

The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

E-00NS is nonsagging, so it won't drip from vertical or overhead surfaces.

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
E-00NS	1.69	Cartridge	3 min.	24 hrs.	1,600	Not Rated	1:1	Paste (100,000 cP)	-65° to 180°	White	Metal, Plastic, Rubber	0000000	000000

Dispensing Gun for 1.69 fl. oz. Cartridges	00000000	Each	000000
Mixer Nozzle for 1.69 fl. oz. Cartridges	00000000	Each	0000
Air-Powered Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges	000000000	Each	000000

Mixer Nozzles for Two-Part Adhesive Cartridges

Taper Tip

Bayonet Connection

Step Tip

Bell-Mount Connection

Snap-In Connection

Twist-Lock Connection

To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge. Mixing elements help combine the two parts of an adhesive as it flows through the nozzle. A short nozzle with many mixing elements combines adhesive while minimizing the adhesive left in the nozzle after dispensing. Choose a nozzle that matches the connection type, size, and mix ratio of your adhesive cartridge.

A taper tip has a small opening for controlled dispensing.

A step tip allows you to trim the opening to the diameter you need.

Bayonet Connection

Each

Taper Tip
For Cartridge Size, oz.	Mix Ratio	Opening ID	Lg.	Mixing Elements	Material		Each
1.42, 1.69	1:1, 2:1, 4:1, 10:1	0.07"	5.9"	20	Polypropylene Plastic	00000000	00000

Package

Taper Tip
For Cartridge Size, oz.	Mix Ratio	Opening ID	Lg.	Mixing Elements	Material	Pkg. Qty.		Pkg.
1.42, 1.69	1:1, 2:1, 4:1, 10:1	0.07"	5.9"	20	Polypropylene Plastic	12	000000000	000000

Bell-Mount Connection

							Each
For Cartridge Size, oz.	Mix Ratio	Opening ID	Lg.	Mixing Elements	Mfr.	Material		Each
3-Step Tip
6.76, 13.5	1:1, 2:1	0.12"-0.37"	7.3"	18	__	Polypropylene Plastic	0000000	00000
5-Step Tip
6.76, 13.5	1:1, 2:1	0.66"	5"	20	3M	Polypropylene Plastic	00000000	0000

Snap-In Connection

							Each
For Cartridge Size, oz.	Mix Ratio	Opening ID	Lg.	Mixing Elements	Mfr.	Material		Each
4-Step Tip
7.8	10:1	0.394"	8.7"	18	SciGrip	Polypropylene Plastic	000000000	00000

Twist-Lock Connection

							Each
For Cartridge Size, oz.	Mix Ratio	Opening ID	Lg.	Mixing Elements	Mfr.	Material		Each
Taper Tip
1.64, 1.69	1:1, 2:1, 2:3	0.08"	3.6"	16	3M	Polypropylene Plastic	0000000	00000

Two-Part Adhesive Dispensing Guns

For 1.42- and 1.69-oz. Cartridges

For 1.69-oz Cartridges

For 6.76-, 13.5-, 15.2-, and 20.29-oz. Cartridges

Use these guns to dispense two-part adhesives. Do not use them with 3M dual cartridges.

For Cartridge Size, oz.	Includes		Each
1.42, 1.69	1:1 and 2:1 Mix Ratio Plungers	00000000	000000
1.69	10:1 Mix Ratio Plunger	0000000	00000
6.76	Built-In Plunger for 1:1 and 2:1 Mix Ratios	0000000	000000
13.5	Built-In Plunger for 1:1 and 2:1 Mix Ratios	0000000	000000

Loctite® Two-Part Adhesive Dispensing Guns

Air-Powered Dispensing Gun For 1.69-oz. Cartridges

Do not use these guns with 3M cartridges.

Air-powered guns dispense two-part adhesives with compressed air. Use these guns only with Loctite® dual cartridges.

		Air Inlet
For Cartridge Size, oz.	Operating Air Pressure, psi	Pipe Size	Thread Type	Gender	Air Hose Included		Each
Air-Powered
1.69	80	1/4	NPT	Male	No	000000000	0000000

Epoxy Potting Compounds

Encase electronic assemblies in a layer of epoxy for protection from dust, chemicals, moisture, mechanical shock, and vibration. The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.

Loctite® Compounds—Extra Hard

			Dry Time
Mfr. Model No.	Container Size, fl. oz.	Consistency	Touch, min.	Overall, hrs.	Dielectric Strength, V/mil	Thermal Conductivity, W/m-K	Temp. Range, °F	For Use On	Color		Each
E-60NC	1.7	Thick Liquid	60	24	550	Not Rated	-65° to 250°	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass	Black	0000000	000000
E-60NC	6.8	Thick Liquid	60	24	550	Not Rated	-65° to 250°	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass	Black	0000000	00000
E-60NC	13.5	Thick Liquid	60	24	550	Not Rated	-65° to 250°	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass	Black	0000000	00000

Dispensing Gun for 1.7 fl. oz. Cartridges	00000000	Each	000000
Mixer Nozzle for 1.7 fl. oz. E-60NC Cartridges	00000000	Each	0000
Mixer Nozzle for 6.8 fl. oz. and 13.5 fl. oz. Cartridges	0000000	Each	0000
Dispensing Gun for 6.8 fl. oz. Cartridges	0000000	Each	000000
Dispensing Gun for 13.5 fl. oz. Cartridges	0000000	Each	000000

Heavy Duty Coatings for Electronics

Thinner than potting compounds, these coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards. Rigid and wear resistant, epoxies have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. Dispense with a mixer nozzle and a gun (each sold separately).

			Dry Time
Mfr. Model No.	Container Size, fl. oz.	Consistency	Touch, min.	Overall, hrs.	Dielectric Strength, V/mil	Temp. Range, °F	For Use On	Color		Each
Loctite® Coatings—Extra Hard
E-00CL	1.7	Thick Liquid	5	24	400	-65° to 180°	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Silver, Plastic, Composites, Fiberglass	Clear	0000000	000000
E-00CL	6.8	Thick Liquid	5	24	400	-65° to 180°	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Silver, Plastic, Composites, Fiberglass	Clear	0000000	00000

Mixer Nozzles for Two-Part Adhesive Cartridges
Mixer Nozzle for 1.7 fl. oz. Cartridges	00000000	Each	00000
Mixer Nozzle for 6.8 fl. oz. Cartridges	0000000	Each	0000

Two-Part Adhesive Dispensing Guns
Dispensing Gun for 1.7 fl. oz. Cartridges	00000000	Each	000000
Dispensing Gun for 6.8 fl. oz. Cartridges	0000000	Each	000000

Heavy Duty High-Purity Coatings for Electronics

This coating is formulated for use in sensitive applications such as manufacturing semiconductors. Thinner than potting compounds, the coating flows easily into small spaces between electrical components. Use it to secure and insulate hardware on printed circuit boards. Rigid and wear resistant, has excellent chemical and moisture resistance, withstands a wide range of temperatures, and provides excellent electrical insulation. It requires a gun and a mixer nozzle (each sold separately) to dispense.

			Dry Time
Mfr. Model No.	Container Size	Consistency	Touch, min.	Overall, hrs.	Dielectric Strength, V/mil	Temp. Range, °F	For Use On	Color		Each
Loctite® Coatings—Extra Hard
M-21HP	1.7 fl. oz.	Paste	20	24	500	-65° to 300°	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Silver, Plastic, Composites, Fiberglass	Off-White	0000000	000000

Mixer Nozzles for Two-Part Adhesive Cartridges
Mixer Nozzle for 1.7 fl. oz. Cartridges	00000000	Each	00000

Two-Part Adhesive Dispensing Guns
Dispensing Gun for 1.7 fl. oz. Cartridges	00000000	Each	000000

Surface Fillers

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

	Container
Mfr. Model No.	Size	Net Weight	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On	Pkg. Qty.		Pkg.
Loctite® Fixmaster Epoxy
EA 445	__	0.12 oz.	Mixer Cup	5	12 hrs.	Thick Liquid	1:1	1 sq. in. @ 1/4"	-65° to 180°	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	000000
EA 445	__	1 oz.	Mixer Cup	5	12 hrs.	Thick Liquid	1:1	1 sq. in. @ 1/4"	-65° to 180°	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	000000
EA 9131	__	0.12 oz.	Mixer Cup	90	24 hrs.	Thick Liquid	1.5:1	1 sq. in. @ 1/4"	-65° to 180°	White	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	00000
															Each
Loctite® Fixmaster Poxy Pak™
EA 9017	0.8 fl. oz.	__	Syringe	5	60 min.	Thick Liquid	1:1	Not Rated	-65° to 300°	Clear	Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Concrete, Glass, Wood	__	0000000	00000

Pourable Surface Fillers

Make castings and fill voids with these two-part pourable epoxies. The size listed is the combined total of the two parts.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Container
Mfr. Model No.	Net Weight, lbs.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	Approximate Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Loctite® Fixmaster Steel Liquid
EA 3472	1	Can	25	24	Thick Liquid	4:1	50 sq. in. @ 1/4"	1"	Yes	-20° to 220°	Gray	Machine, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete	0000000	0000000
EA 3472	4	Can	25	24	Thick Liquid	4:1	200 sq. in. @ 1/4"	1"	Yes	-20° to 220°	Gray	Machine, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete	0000000	000000

Water-Resistant Surface Fillers

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.

Putty fillers come in a stick with a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place. NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.

	Container
Mfr. Model No.	Net Weight, oz.	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Approx. Coverage @ Thick.	Max. Thick.	Temp. Range, °F	Color	Finishing Method	For Use On	Specifications Met		Each
Loctite® Fixmaster Metal Magic Steel
EA 3463	4	Stick	3	24 hrs.	Putty	10 sq. in. @ 1/4"	1"	-20° to 250°	Gray	Sand	Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete	NSF/ANSI 61	0000000	000000
Loctite® Fixmaster Underwater Repair Epoxy
EA 9490	4	Stick	15	60 min.	Putty	16 sq. in. @ 1/4"	1/4"	Not Rated to 300°	White	Machine, Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Concrete, Wood	__	0000000	00000

Surface Fillers for Metal

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.

Loctite EA 3471 and PC2 35642 have stronger adhesion than any other surface fillers we offer.

	Container
Mfr. Model No.	Net Weight	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Loctite® Fixmaster Steel Putty
EA 3471	1 lbs.	Jar	30	24	Thick Liquid	2.5:1	40 sq. in. @ 1/4"	-20° to 220°	Gray	Machine, Drill, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron	0000000	000000
EA 3473	1 lbs.	Jar	3	24	Paste	1:1	50 sq. in. @ 1/4"	-20° to 190°	Gray	Machine, Drill, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron	0000000	00000
Loctite® Fixmaster Stainless Steel Putty
EA 3476	1 lbs.	Jar	20	24	Paste	4:1	30 sq. in. @ 1/4"	-20° to 220°	Gray	Machine, Drill, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron	0000000	000000

Chemical-Resistant Surface Fillers for Metal

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

	Container
Mfr. Model No.	Net Weight, lbs.	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approximate Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Loctite® Fixmaster Superior Metal
EA 3478	1	Jar	20	24 hrs.	Paste	4:1	30 sq. in. @ 1/4"	1"	Yes	-20° to 250°	Gray	Machine, Drill	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	0000000	0000000