How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Push-to-Close Latches
More
Easy-Grip Lift-and-Drop Barrel Slide-Bolt Latches
A large handle makes gripping these latches easier than other lift-and-drop barrel slide-bolt latches. Slide the bolt and drop the handle to secure. The handle stays out of the way when not in use. All latches are reversible for right- and left-hand mounting.
For technical drawings and 3-D models, click on a part number.
Surface-Mount Strike Plate | Mounting | Mounting Hole | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Projection | Bolt Dia. | Ht. | Wd. | Orientation | Fasteners Included | Screw Size | Dia. | Style | Each | ||
Beige Painted Iron | |||||||||||||
| E | 2 1/8" | 8" | 1 1/8" | 7/16" | 3 9/16" | 3/4" | Horizontal | Yes | No. 12 | 9/32" | Straight | 000000 | 000000 |
| E | 3 1/16" | 12" | 1 5/16" | 11/16" | 4 1/8" | 1 1/2" | Horizontal | Yes | No. 18, No. 20 | 11/32", 13/32" | Straight | 000000 | 00000 |
Zinc-Plated Iron—Dull | |||||||||||||
| E | 2 1/8" | 8" | 1 1/8" | 7/16" | 3 9/16" | 3/4" | Horizontal | Yes | No. 12 | 9/32" | Straight | 0000000 | 00000 |
| E | 3 1/16" | 12" | 1 5/16" | 11/16" | 4 1/8" | 1 1/2" | Horizontal | Yes | No. 18, No. 20 | 11/32", 13/32" | Straight | 0000000 | 000000 |
Chain-Grip Spring-Loaded Slide-Bolt Latches
Pull the chain-grip to unlatch hard-to-reach doors and panels. Bolts are spring-loaded to stay latched until you activate the pull. All latches have bolts that can be rotated 180°, so they can be used with both push and pull doors. They are reversible for right- and left-hand mounting.
For technical drawings and 3-D models, click on a part number.
Bolt | Surface-Mount Strike Plate | Mounting | Mounting Hole | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Projection | Wd. | Thick. | Ht. | Wd. | Orientation | Fasteners Included | Dia. | Style | Includes | Each | ||
Beige Painted Iron | ||||||||||||||
| B | 9" | 4 1/4" | 2" | 1 3/16" | 1" | 2 1/4" | 4 5/8" | Horizontal, Vertical | Yes | 7/16" | Straight | Clip for Pull Chain | 0000000 | 0000000 |
Easy-Grip Lift-and-Drop Barrel Padlockable Slide-Bolt Latches
A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches. Slide the bolt and drop the handle to secure. The handle stays out of the way when not in use. All latches are reversible for right- and left-hand mounting.
For technical drawings and 3-D models, click on a part number.
Surface-Mount Strike Plate | Mounting | Mounting Hole | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Proj. | Bolt Dia. | For Max. Padlock Shackle Dia. | Ht. | Wd. | Orientation | Fasteners Included | Screw Size | Dia. | Style | Each | ||
Beige Painted Iron | ||||||||||||||
| C | 2 1/8" | 8" | 1 1/4" | 7/16" | 5/8" | 3 9/16" | 3/4" | Horizontal | No | No. 12 | 9/32" | Straight | 000000 | 000000 |
| C | 3 1/16" | 12" | 1 5/16" | 11/16" | 5/8" | 4 1/8" | 1 1/2" | Horizontal | No | No. 18, No. 20 | 11/32", 13/32" | Straight | 000000 | 00000 |
Pressure-Venting Push-to-Close Latches with Handle
For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level. They can also be manually opened by pulling on the handle. Mount latches horizontally to the face of the door with the strike plate mounted on the frame. To determine door mounting location, look at the outside face of the door: if the hinges are on the right, order a right-side latch; if the hinges are on the left, order a left-side latch.
Door offset is the space between the door face and the frame when the door is closed. Pressure release force is the amount of pressure an enclosed area can sustain before the latch opens. Adjust the catch to make the latch more or less sensitive to pressure. Styles 1 and 2 adjust with a slotted screwdriver.
For technical drawings and 3-D models, click on a part number.
Mounting | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Door Offset | Pressure Release Force Range, lbs./sq. ft. | Lg. | Projection | Mounting Hole Ctr.-to-Ctr. (B) | Strike Plate Mounting Hole Ctr.-to-Ctr. (D) | Fasteners Included | Screw Size  | Specifications Met | Each | |
Iron—Dull | ||||||||||
| 0" to 3/16" | 10 to 45 | 3 3/4" | 3 1/4" | 2" | 2" | No | 5/16" | FM Approved | 0000000 | 0000000 |
| 1/4" to 13/16" | 10 to 45 | 3 3/4" | 3 1/4" | 2" | 2" | No | 5/16" | FM Approved | 0000000 | 000000 |
Padlockable Push-to-Close Latches with Handle and Emergency Release
An emergency release handle offers a means of escape if a door closes with someone inside an enclosure. Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame.
Latches have an adjustable strike plate to compensate for changes in offset caused by sagging doors and worn or flattened gaskets. Door offset is the space between the door face and the frame when the door is closed.
For technical drawings and 3-D models, click on a part number.
Latches | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Hole Ctr.-to-Ctr. | Strike Plate Mounting Hole Ctr.-to-Ctr. | Mounting | Replacement Emergency-Release Rods | ||||||||||||
| For Door Offset | Lg. | Projection | For Max. Padlock Shackle Dia. | (A) | (B) | (C) | (D) | (E) | Fasteners Included | Screw Size | Each | Each | |||
Gray Painted Iron | |||||||||||||||
Steel Emergency Release Rod and Iron Handle | |||||||||||||||
| 2 | 0" to 1/2" | 8" | 3 1/2" | 5/16" | 1 3/4" | 2 3/8" | 2 3/8" | 1 3/16" | 2 7/16" | No | 1/4" | 0000000 | 000000 | 0000000 | 000000 |
| 2 | 0" to 11/16" | 10 5/8" | 4 7/16" | 11/32" | 1 15/16" | 3" | 3" | 1 1/2" | 3 1/8" | No | No. 10 | 0000000 | 000000 | 0000000 | 00000 |
| 2 | 5/8" to 1 1/4" | 8" | 3 1/2" | 5/16" | 1 3/4" | 2 3/8" | 2 3/8" | 1 3/16" | 2 7/16" | No | 1/4" | 0000000 | 00000 | 0000000 | 00000 |
| 2 | 11/16" to 1 1/2" | 10 5/8" | 4 7/16" | 11/32" | 1 15/16" | 3" | 3" | 1 1/2" | 3 1/8" | No | No. 10 | 0000000 | 000000 | 0000000 | 00000 |
Heavy Duty Padlockable Swinging Bar Latches
In addition to being padlockable, this heavy duty latch comes with two handles for access from the inside as well as the outside. It's often used on refrigerators and truck doors. It is reversible for right- and left-hand mounting.
For technical drawings and 3-D models, click on a part number.
Rod | Arm Mounting Plate | Strike Plate | Mounting | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Arm Lg. | Projection | For Min. Door Thick. | Dia. | Lg. | Thread Lg. | For Max. Padlock Shackle Dia. | Lg. | Ht. | Lg. | Ht. | Fasteners Included | Screw Size | No. of | Dia. | Style | Each | |
Through-Hole Mount | |||||||||||||||||
Zinc-Plated Iron—Dull (Zinc Handle) | |||||||||||||||||
| 7 1/4" | 2 1/8" | 2" | 9/16" | 8 3/4" | 7" | 3/8" | 1 1/2" | 2 1/4" | 7/8" | 7 3/8" | No | No. 10 | 6 | 3/16" | Countersunk | 0000000 | 0000000 |
Trailer Kingpin Locks
Prevent theft—cover the entire kingpin of a trailer with these locks. The lock is recessed to prevent twisting and prying. The locking mechanism is pick-resistant and slides in like a drawer. Locks include two keys that may only be duplicated by the manufacturer.
Keyed differently locks each open with a different key.
Keyed alike locks all open with the same key.
For technical drawings and 3-D models, click on a part number.
Floor Locks
Stabilize carts, trucks, workbenches, and other mobile equipment during loading and unloading. Floor locks bolt or weld to the underside of your equipment and have a spring-loaded base with a nonskid floor pad to keep equipment stationary.
Note: Floor locks are not load rated. They are designed to brake your equipment in place, not lift it off the floor.
Pivoting base compensates for uneven floors.
For technical drawings and 3-D models, click on a part number.
Ht. | Mounting Plate | Mounting Hole Ctr.-to-Ctr. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Caster Mount Ht. | Extended | Retracted | Clearance | Style | Lg. | Wd. | Lg. (A) | Lg. (B) | Wd. (A) | Wd. (B) | Mounting Fasteners Included | For Screw Size | Color | Each | |
Painted Iron | |||||||||||||||
| 5 5/8"-5 7/8" | 5 5/8" | 4 9/16" | 1 5/16" | 1 | 4 13/16" | 4 1/4" | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | Gray | 00000000 | 0000000 |
| 7 1/4"-7 1/2" | 7 1/2" | 6" | 1 3/4" | 1 | 6 1/2" | 4 3/4" | 5 1/4" | 4 15/16" | 3 3/8" | 2 7/16" | No | 1/2" | Gray | 00000000 | 000000 |
| 10 1/4"-10 5/8" | 10 1/4" | 9 1/8" | 1 3/8" | 1 | 6 1/2" | 4 3/4" | 5 1/4" | 4 15/16" | 3 3/8" | 2 7/16" | No | 1/2" | Gray | 00000000 | 000000 |
Locking Fill Caps for Drums
Prevent tampering with the contents of your drum while allowing access for filling.
For technical drawings and 3-D models, click on a part number.
Cam-and-Groove Hose Couplings for Abrasive Material
Made of ductile iron, these couplings are tough enough to handle sand, cement, and other abrasive solids and slurries. They resist impact and wear better than aluminum and brass couplings. Use their cam-and-groove fittings to quickly connect and disconnect medium- to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket, forming a tight seal. To disconnect, lift both levers and pull out the plug. A complete coupling consists of a plug and a socket (both sold separately).
Sockets with male threaded end are also known as B couplers.
Sockets with female threaded end are also known as D couplers.
Sockets with barbed end are also known as C couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Temperature Range: -20° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, PT Coupling Cam-and-Groove
Sockets | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | Replacement Levers | Protective Plugs | ||||||||||||
| Coupling Size | Socket ID | Pipe Size | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | Each | ||||
Ductile Iron | |||||||||||||||
| 1 | 1 7/16" | 1 | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 250 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 1 1/2 | 2 1/8" | 1 1/2 | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 0000000 | 0000 | 000000 | 00 |
| 2 | 2 1/2" | 2 | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 0000000 | 0000 | 00000000 | 000000 |
| 3 | 3 5/8" | 3 | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 0000000 | 0000 | 00000000 | 00000 |
| 4 | 4 3/4" | 4 | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 150 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 00000 | 0000000 | 0000 | 00000000 | 00000 |
- Maximum Pressure: See table
- Temperature Range: -20° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, PT Coupling Cam-and-Groove
Sockets | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | Replacement Levers | Protective Plugs | ||||||||||||
| Coupling Size | Socket ID | Pipe Size | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | Each | ||||
Ductile Iron | |||||||||||||||
| 1 | 1 7/16" | 1 | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 250 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 1 1/2 | 2 1/8" | 1 1/2 | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 0000000 | 0000 | 000000 | 00 |
| 2 | 2 1/2" | 2 | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 0000000 | 0000 | 00000000 | 000000 |
| 3 | 3 5/8" | 3 | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 0000000 | 0000 | 00000000 | 00000 |
| 4 | 4 3/4" | 4 | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 150 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 00000 | 0000000 | 0000 | 00000000 | 00000 |
- Maximum Pressure: See table
- Temperature Range: -20° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, PT Coupling Cam-and-Groove
Sockets | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | Replacement Levers | Protective Plugs | ||||||||||||
| Coupling Size | Socket ID | For Hose ID | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | Each | ||||
Ductile Iron | |||||||||||||||
| 1 | 1 7/16" | 1" | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 250 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 1 1/2 | 2 1/8" | 1 1/2" | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 0000000 | 0000 | 000000 | 00 |
| 2 | 2 1/2" | 2" | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 0000000 | 0000 | 00000000 | 000000 |
| 3 | 3 5/8" | 3" | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 0000000 | 0000 | 00000000 | 00000 |
| 4 | 4 3/4" | 4" | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 150 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 00000 | 0000000 | 0000 | 00000000 | 00000 |
- Maximum Pressure: See table
- Temperature Range: -20° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, PT Coupling Cam-and-Groove
Caps | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | 6" Retaining Chains | 12" Retaining Chains | |||||||||
| Coupling Size | Socket ID | No. of | Material | Pull Ring Material | Max. Pressure | Each | Each | Each | |||
Ductile Iron | |||||||||||
| 1 | 1 7/16" | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 250 psi @ 72° F | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
| 1 1/2 | 2 1/8" | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 250 psi @ 72° F | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 |
| 2 | 2 1/2" | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 250 psi @ 72° F | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 |
| 3 | 3 5/8" | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 200 psi @ 72° F | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 |
| 4 | 4 3/4" | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 150 psi @ 72° F | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 |