Spanner Sockets
For easy tightening and loosening, these sockets have pins that grip the slotted sides on bearing nuts. These sockets require less clearance around bearings than standard hook spanner wrenches, so they’re good in tight spaces. Use them with a square-drive wrench handle or a ratchet wrench; they’re not for use with impact wrenches.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Length | OD | For Nut Size  | For Nut Thread Size | For Bearing Nut Specifications Met | For Nut Diameter | Nut Clearance Depth | Bolt Clearance Depth | Material | Each | |
4-Pin | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
3/8" Square Drive | |||||||||||
| 3/4" | 3" | 1 1/8" | __ | 0.391"-32 | ANSI/ABMA 8.2 | 3/4" | __ | 2 1/8" | Steel | 00000000 | 0000000 |
| 7/8" | 3" | 1 1/4" | __ | 0.469"-32 | ANSI/ABMA 8.2 | 7/8" | __ | 2 1/8" | Steel | 00000000 | 000000 |
| 1" | 3" | 1 3/8" | __ | 0.586"-32 | ANSI/ABMA 8.2 | 1" | __ | 2 1/8" | Steel | 00000000 | 000000 |
| 1 1/8" | 3" | 1 1/2" | __ | 0.664"-32 | ANSI/ABMA 8.2 | 1 1/8" | __ | 2 1/16" | Steel | 00000000 | 000000 |
| 1 3/8" | 3" | 1 13/16" | __ | 0.781"-32 | ANSI/ABMA 8.2 | 1 3/8" | __ | 2 1/16" | Steel | 00000000 | 000000 |
| 1 9/16" | 3" | 2" | __ | 0.969"-32 | ANSI/ABMA 8.2 | 1 9/16" | __ | 2 1/16" | Steel | 00000000 | 000000 |
| 18 mm | 56.2mm | 22mm | __ | M10 | DIN 981, ISO 2982 | 18mm | 6mm | 43mm | Steel | 00000000 | 000000 |
| 18 mm | 76mm | 28.5mm | __ | M10 | ISO 2982-2 | 18mm | __ | 54mm | Steel | 00000000 | 000000 |
| 22 mm | 56.2mm | 28mm | __ | M12 | DIN 981, ISO 2982 | 22mm | 6mm | 43mm | Steel | 00000000 | 000000 |
| 22 mm | 76mm | 32mm | __ | M12 | ISO 2982-2 | 22mm | __ | 54mm | Steel | 00000000 | 000000 |
| 25 mm | 76mm | 35mm | __ | M15 | ISO 2982-2 | 25mm | __ | 54mm | Steel | 00000000 | 000000 |
| 28 mm | 76mm | 38mm | __ | M17 | ISO 2982-2 | 28mm | __ | 54mm | Steel | 00000000 | 000000 |
| 32 mm | 76mm | 42mm | __ | M20 | ISO 2982-2 | 32mm | __ | 52mm | Steel | 00000000 | 000000 |
| 38 mm | 76mm | 49.5mm | __ | M25 | ISO 2982-2 | 38mm | __ | 52mm | Steel | 00000000 | 000000 |
1/2" Square Drive | |||||||||||
| 1 3/4" | 3 1/2" | 2 3/8" | __ | 1.173"-18 | ANSI/ABMA 8.2 | 1 3/4" | __ | 2 1/4" | Steel | 00000000 | 000000 |
| 2 1/16" | 3 1/2" | 2 11/16" | __ | 1.312"-18 | ANSI/ABMA 8.2 | 2 1/16" | __ | 2 1/4" | Steel | 00000000 | 000000 |
| 2 1/16" | 3 1/2" | 2 11/16" | __ | 1.376"-18 | ANSI/ABMA 8.2 | 2 1/16" | __ | 2 1/4" | Steel | 00000000 | 000000 |
| 2 1/4" | 3 1/2" | 2 7/8" | __ | 1.563"-18 | ANSI/ABMA 8.2 | 2 1/4" | __ | 2 1/4" | Steel | 00000000 | 000000 |
| 2 17/32" | 3 1/2" | 3 3/16" | __ | 1.767"-18 | ANSI/ABMA 8.2 | 2 17/32" | __ | 2 1/4" | Steel | 00000000 | 000000 |
| 2 11/16" | 4" | 3 3/8" | __ | 1.967"-18 | ANSI/ABMA 8.2 | 2 11/16" | __ | 2 5/8" | Steel | 00000000 | 000000 |
| 2 31/32" | 4" | 3 5/8" | __ | 2.157"-18 | ANSI/ABMA 8.2 | 2 31/32" | __ | 2 5/8" | Steel | 00000000 | 000000 |
| 3 5/32" | 4" | 3 13/16" | __ | 2.360"-18 | ANSI/ABMA 8.2 | 3 5/32" | __ | 2 5/8" | Steel | 00000000 | 000000 |
| 3 3/8" | 4" | 4" | __ | 2.548"-18 | ANSI/ABMA 8.2 | 3 3/8" | __ | 2 5/8" | Steel | 00000000 | 000000 |
| 3 5/8" | 4" | 4 1/4" | __ | 2.751"-18 | ANSI/ABMA 8.2 | 3 5/8" | __ | 2 5/8" | Steel | 00000000 | 000000 |
| 25 mm | 82mm | 33mm | M10 M15 | __ | DIN 1804 DIN 981, ISO 2982 | 25mm | 7mm | 59mm | Steel | 00000000 | 000000 |
| 28 mm | 82mm | 36mm | M12 M17 | __ | DIN 1804 DIN 981, ISO 2982 | 28mm | 7mm | 59mm | Steel | 00000000 | 000000 |
| 32 mm | 82mm | 38mm | M16 M20 | __ | DIN 1804 DIN 981, ISO 2982 | 32mm | 8.4mm | 56mm | Steel | 00000000 | 000000 |
| 38 mm | 82mm | 46mm | __ | M25 | DIN 981, ISO 2982 | 38mm | 10.4mm | 56mm | Steel | 00000000 | 000000 |
| 45 mm | 82mm | 53mm | M26 M30 | __ | DIN 1804 DIN 981, ISO 2982 | 45mm | 11mm | 56mm | Steel | 00000000 | 000000 |
| 45 mm | 90mm | 57mm | __ | M30 | ISO 2982-2 | 45mm | __ | 57mm | Steel | 00000000 | 000000 |
| 48 mm | 90mm | 60mm | __ | M32 | ISO 2982-2 | 48mm | __ | 57mm | Steel | 00000000 | 000000 |
| 52 mm | 82mm | 60mm | __ | M35 | DIN 981, ISO 2982 | 52mm | 11mm | 56mm | Steel | 00000000 | 000000 |
| 52 mm | 90mm | 64mm | __ | M35 | ISO 2982-2 | 52mm | __ | 57mm | Steel | 00000000 | 000000 |
| 58 mm | 82mm | 68mm | M38 M40 | __ | DIN 1804 DIN 981, ISO 2982 | 58mm | 11mm | 56mm | Steel | 00000000 | 000000 |
| 58 mm | 90mm | 74mm | __ | M40 | ISO 2982-2 | 58mm | __ | 57mm | Steel | 00000000 | 000000 |
| 65 mm | 90mm | 81mm | __ | M45 | ISO 2982-2 | 65mm | __ | 57mm | Steel | 00000000 | 000000 |
| 70 mm | 90mm | 86mm | __ | M50 | ISO 2982-2 | 70mm | __ | 65mm | Steel | 00000000 | 000000 |
| 75 mm | 102mm | 91mm | __ | M55 | ISO 2982-2 | 75mm | __ | 65mm | Steel | 00000000 | 000000 |
| 80 mm | 102mm | 96mm | __ | M60 | ISO 2982-2 | 80mm | __ | 65mm | Steel | 00000000 | 000000 |
3/4" Square Drive | |||||||||||
| 3 7/8" | 5" | 4 1/2" | __ | 2.933"-12 | ANSI/ABMA 8.2 | 3 7/8" | __ | 3 1/8" | Steel | 00000000 | 000000 |
| 4 15/16" | 5" | 5 9/16" | __ | 3.730"-12 | ANSI/ABMA 8.2 | 4 15/16" | __ | 3 1/8" | Steel | 00000000 | 00000000 |
| 5 3/16" | 5" | 5 13/16" | __ | 3.918"-12 | ANSI/ABMA 8.2 | 5 3/16" | __ | 3 1/8" | Steel | 00000000 | 00000000 |
| 5 7/16" | 6" | 6 1/8" | __ | 4.122"-12 | ANSI/ABMA 8.2 | 5 7/16" | __ | 3 1/8" | Steel | 00000000 | 00000000 |
| 70 mm | 90mm | 78.5mm | __ | M50 | DIN 981, ISO 2982 | 70mm | 13.8mm | 62mm | Steel | 00000000 | 000000 |
| 80 mm | 90mm | 88.5mm | __ | M60 | DIN 981, ISO 2982 | 80mm | 15mm | 62mm | Steel | 00000000 | 000000 |
| 85 mm | 90mm | 94mm | __ | M65 | DIN 981, ISO 2982 | 85mm | 15mm | 62mm | Steel | 00000000 | 000000 |
| 105 mm | 127mm | 121mm | __ | M80 | ISO 2982-2 | 105mm | __ | 81mm | Steel | 00000000 | 00000000 |
| 110 mm | 127mm | 126mm | __ | M85 | ISO 2982-2 | 110mm | __ | 81mm | Steel | 00000000 | 00000000 |
| 130 mm | 127mm | 149.5mm | __ | M100 | ISO 2982-2 | 130mm | __ | 81mm | Steel | 00000000 | 00000000 |
1" Square Drive | |||||||||||
| 92 mm | 110mm | 103mm | __ | M70 | DIN 981, ISO 2982 | 92mm | 15mm | 75mm | Steel | 00000000 | 00000000 |
| 105 mm | 110mm | 116mm | __ | M80 | DIN 981, ISO 2982 | 105mm | 17mm | 75mm | Steel | 00000000 | 00000000 |
| 110 mm | 110mm | 121mm | __ | M85 | DIN 981, ISO 2982 | 110mm | 19mm | 75mm | Steel | 00000000 | 00000000 |
8-Point Sockets
Quickly position these sockets on square and external 8-point fasteners.
3/4" square drive size sockets work with wheel bearing locknuts on trucks and trailers.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | OD | Material | Each | |
3/4" Square Drive | |||||
|---|---|---|---|---|---|
| 2 3/8" | 3 1/2" | 2 45/64" | Steel | 000000000 | 000000 |
| 2 9/16" | 3 1/2" | 2 59/64" | Steel | 000000000 | 00000 |
| 2 3/4" | 3 1/2" | 3 13/64" | Steel | 000000000 | 00000 |
| 2 7/8" | 3 1/2" | 3 9/32" | Steel | 000000000 | 00000 |
| 3" | 3 1/2" | 3 31/64" | Steel | 000000000 | 00000 |
| 3 1/8" | 3 1/2" | 3 39/64" | Steel | 000000000 | 00000 |
| 3 1/4" | 3 1/2" | 3 45/64" | Steel | 000000000 | 00000 |
| 3 1/2" | 3 1/2" | 3 63/64" | Steel | 000000000 | 00000 |
| 3 3/4" | 3 1/2" | 4 17/64" | Steel | 000000000 | 00000 |
| 3 7/8" | 3 1/2" | 4 27/64" | Steel | 000000000 | 00000 |
| 4 3/8" | 3 1/2" | 4 63/64" | Steel | 000000000 | 00000 |
| 4 1/2" | 3 1/2" | 5 1/8" | Steel | 000000000 | 00000 |
| 4 7/8" | 3 1/2" | 5 35/64" | Steel | 000000000 | 00000 |
| 94 mm | 3 1/2" | 4 7/32" | Steel | 000000000 | 00000 |
| 100 mm | 3 1/2" | 4 31/64" | Steel | 000000000 | 00000 |
Budd Wheel Impact Sockets
Remove and install dual wheels on trucks and trailers—these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels. They are made to withstand the high torque and force of impact tools.
Sockets require a locking retainer. Use with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring style socket retainer.
For technical drawings and 3-D models, click on a part number.
Sockets | Retaining Rings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Drive Size | Square Recess Size | Overall Lg. | OD | Compatible Retaining Ring ID | Bolt Clearance Style | Material | Finish | Each | Each | ||
Inch | |||||||||||
3/4" Square Drive | |||||||||||
| 1 1/2" | 13/16" | 4" | 2 1/4" | 1 5/8" | Deep | Steel | Black Oxide | 0000000 | 000000 | 0000000 | 00000 |
1" Square Drive | |||||||||||
| 1 1/2" | 13/16" | 3 15/16" | 2 1/4" | 2" | Deep | Steel | Zinc-Phosphate Coated | 000000000 | 00000 | 00000000 | 0000 |
Metric | |||||||||||
1" Square Drive | |||||||||||
| 35 mm | 17mm | 3 3/4" | 2 9/64" | 2" | Deep | Steel | Zinc-Phosphate Coated | 000000000 | 00000 | 00000000 | 0000 |
| 38 mm | 20mm | 3 13/16" | 2 13/64" | 2" | Deep | Steel | Zinc-Phosphate Coated | 000000000 | 00000 | 00000000 | 0000 |
| 41 mm | 21mm | 3 15/16" | 2 45/64" | 2" | Deep | Steel | Zinc-Phosphate Coated | 000000000 | 00000 | 00000000 | 0000 |
Wheel Bearing Locknut Socket Sets
 Plastic Case | 4-Pin |
 6-Pin | |
 6-Point | |
 6-Point Rounded |
Shaped and sized for compatibility with wheel bearing locknuts on trucks and trailers, the sockets in these sets make it easy to install and remove locknuts. They ensure the proper torque setting when you reinstall a locknut on your wheel, so you know it's safe and secure. These are square drive sockets for use with hand-driven tools, not impact wrenches. Made of steel, they grip locknuts tightly and prevent rounding.
4-pin and 6-pin sockets fit around retaining locknuts with slots or holes in the side. Also known as spanner sockets, they’re similar to tri-groove sockets but have four or six pins instead of three.
Spindle puller adapters remove the front spindle on four-wheel drive trucks so you can access the needle bearing when lubricating and aligning the front wheels.
6-point sockets are designed for use with hex locknuts.
6-point rounded sockets fit the special rounded hex nuts found on some trucks.
Carry sets with a plastic case from one location to the next.
| Number of Pieces | Components Included | Includes | Container Type | Each | |
1/2" Square Drive—Chrome-Plated Steel | |||||
|---|---|---|---|---|---|
| 6 | 5 Sockets 1 Adapter | 4-Pin: 2", 2 1/4", 2 3/4" 6-Pin: 2 1/4" Spindle Puller Adapter | Plastic Case | 000000000 | 0000000 |
| 7 | 7 Sockets | 6-Point: 2 3/8", 2 1/2", 55 mm 6-Point Rounded: 2 3/8", 2 1/2", 2 9/16", 2 3/4" | Plastic Case | 000000000 | 000000 |
Budd Wheel Impact Socket Sets
 Budd Wheel Impact Socket Set |  4-Point Socket Shape |  6-Point Socket Shape | ||||
 Socket Retaining Ring | ||||||
Remove and install dual wheels on trucks and trailers with the sockets in these sets. The sockets are extra deep for use with Budd wheels, so you can remove both the nut and the stud with a single socket. Sets include sockets for hex drives to access lug nuts and sockets for square drives to turn the threaded shafts on inner wheels. All are impact sockets, made to withstand the high torque and force of impact tools. Use them with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring-style socket retainer.
For technical drawings and 3-D models, click on a part number.