A flange with mounting holes makes it easy to attach a load to these bearings. Create a compact linear and rotary motion system for robots and other applications requiring complex, fast movements, by combining them with ball splines.

Combine these bearings with a ball spline to create a compact linear and rotary motion system for applications with fast, complex movements, such as robotics.

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Designed specifically for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Suitable for clean room use, these carriages and guide rails are made entirely of stainless steel.

Run many cycles in tight spaces before replacing or re-greasing carriages.

With a plastic cage that surrounds the ball bearings to prevent them from colliding, these extra-wide carriages run quietly for many cycles without needing maintenance. All of these carriages have a wide base and low-profile design to stabilize moment (twisting) and off-center loads better than other carriages.

Small enough to fit in a camera zoom lens and other precision motion applications, these carriages and guide rails have a black chrome-plated finish that diffuses light to prevent reflecting light from causing equipment to malfunction.

For smooth, accurate movement around curves and loops, these carriages have ball bearings that work well in high-speed, high-load applications.

Create a self-aligning carriage and guide rail system to compensate for mounting surfaces that aren't parallel.

A handle on the side of the carriage locks the carriage in place.

V-shaped rollers and rails allow these carriages to operate well in dirty environments because the debris won't get trapped on the rail.

High-temperature PTFE-thickened grease enables these carriages to operate in temperatures up to 500° F, higher than any other carriage that we offer.

Nylon rollers and aluminum rails make these good for light duty applications.

A linear scale and micrometer-like hand wheel measure travel distance in increments of 0.001".

Built to handle high speeds for their size. These track rollers have an outer ring that supports higher speeds than standard-sized track rollers.

With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any threaded track roller we offer.

The soft rubber or plastic surface on these rollers creates less noise than the metal surfaces found on other track rollers.

These rollers are rated to handle radial and thrust (top and side) loads simultaneously.

These rollers are rated to handle radial and thrust (top and side) loads simultaneously.

Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.

These rollers are rated to handle radial and thrust (top and side) loads simultaneously.

Install these rollers in worn-out mounting holes or where you don’t have access to the back of the mounting hole. The stud is tapered, so you can quickly secure them in place with a set screw instead of a nut on the back like traditional rollers.

Thread the stud directly into a component or secure with a nut for through-hole mounting.

Support and guide loads on angle rails in food, pharmaceutical, and other sanitary environments. Also known as yoke-style cam followers, these track rollers offer more mounting flexibility than threaded alternatives and are typically mounted on shafts and clevis rod ends.

Thread the stud directly into a component or secure with a nut for through-hole mounting.

Add your own stepper motor and controller to precisely move the ball screw and carriage smoothly at high speeds, like a head on an inkjet printer.

A lead screw that converts rotational motion to linear motion sits inside the motor body for a compact footprint. Add a driver and controller to these actuators to repeatedly position loads with speed and precision.

Less than one-third the height of standard electric positioning slides, these slides push and pull small parts in electronics manufacturing, robotics, and other automated processes.

With a stepper motor and driver built in, these actuators come ready to use for clamping, sorting, and ejecting tasks.

Smaller than any other actuator in our offering, these actuators’ short stroke length makes them good for automating fine, precise adjustments.