Move loads with consistent, repeatable push-pull motion.

Create linear motion economically with one of these open-frame solenoids.

High-force solenoids draw more power than our other open-frame solenoids, so they can deliver higher force.

A lead screw that converts rotational motion to linear motion sits inside the motor body for a compact footprint. Add a driver and controller to these actuators to repeatedly position loads with speed and precision.

With an included controller and an integrated stepper motor, these slides are a complete precision motion control system.

A built-in stepper motor moves the load on these slides smoothly and precisely at high speeds, similar to an inkjet printer head.

Smaller than any other actuator in our offering, these actuators’ short stroke length makes them good for automating fine, precise adjustments.

Prevent dust from circulating while precisely positioning parts for drilling, fastening, assembly, and measuring.

With a stepper motor and driver built in, these actuators come ready to use for clamping, sorting, and ejecting tasks.

Push and pull light duty loads. These air cylinders use compressed air to both extend and retract, so they operate at nearly full force in either direction.

These cylinders thread directly into your equipment, taking minimal space.

Also known as air clamps, these cylinders are used to apply force in holding applications.

Built to withstand hard knocks, these cylinders have a thick barrel wall for more durability than standard air cylinders.

Unlike other air cylinders that push and pull one object, these double-ended cylinders push one object while pulling another.

Rods along the barrel of these cylinders secure the end caps and shield the barrel from impact.

Made to fit the most common mounting footprint, these cylinders have an NFPA (National Fluid Power Association) industry-standard footprint, ensuring easy interchangeability.

Cylinders have two parallel piston rods that prevent twisting as they extend and retract.

These cylinders have self-adjusting cushions that automatically compensate for changes in load and speed.

With no external moving parts, these air slides provide a long stroke, but have a static footprint—only the carriage on top moves.

Threaded through-holes in each corner allow you to mount these cylinders directly to equipment or mount with attachments.

Mount these cylinders directly to equipment in environments where contamination is a concern, such as electronics manufacturing.

Turn the adjustment bolt on these actuators to set the rotation you need for your application.

Designed to turn heavy loads, these rotary air actuators have rack-and-pinion gears that provide high torque output.

Use these slides in a variety of manual-positioning applications for laboratory and production equipment as well as for positioning parts for drilling, fastening, assembly, and measuring.

Made with Frelon bearings, these slides have over four times the load capacity of standard positioning slides.

A micrometer handle ensures accurate, repeatable positioning along a single axis—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

A thumb screw locks the slide to prevent movement in systems where vibration is present.

Jacks are equipped with two foot pedals for hands-free use, one to raise the ram and another to lower it.

Use these versatile jacks for lifting, spreading, bending, pushing, and straightening.

Connect up to four rams and a gauge to a pump. Ram connections have flow-adjustment valves to adjust ram speed, or shut it off to temporarily hold a load.

Connect these pumps to a ram to create a hydraulic jack.

Jacks include a ram, a hand pump with hydraulic oil, a pressure gauge, and a hydraulic hose.

This steel-reinforced hose has male threads.

Connect a hose to a ram or pump.

Roll from job to job and under hard-to-reach places.

Combine these grippers with your gripping fingers to lift and move items in pick-and-place applications.

These grippers pick up a product and turn it 180° before releasing.

Unlike air-powered grippers, which leak air, these electric grippers won’t release dirt or particulates, making them good for pick-and-place assembly, packaging, and finishing jobs in labs, electronics plants, and other clean environments. Often used with mobile robots, all have a servomotor that opens and closes the grippers with equal force.

With a small body size, these cylinders fit into tight spaces but offer similar push forces to standard hydraulic cylinders.

Small yet powerful, these cylinders thread into a system for workholding applications.

These cylinders have a magnetic piston that can be used with tie rod-mount proximity switches to electronically indicate piston position. For easy interchangeability, their mounting footprint meets NFPA or NFPA and JIC industry standards.