Made of zinc-plated steel or stainless steel, these clevis rod ends offer more corrosion resistance than standard steel clevis rod ends.

In addition to offering superior chemical resistance, these lightweight, fiber-reinforced nylon rod ends also reduce noise and vibration.

A male-threaded shank lets you build a linkage with a tapped tube or any female-threaded connection.

These internally threaded rod ends have an eyelet and a ball that swivels to support angular misalignment. Also known as rod-end bearings.

A carbon fiber-reinforced insert or PTFE liner reduces wear, handles shock loads, and eliminates the need for lubrication.

For ease of installation, these rod ends come with a compatible jam nut. They have an eyelet and a ball that swivel to support angular misalignment.

An oil-embedded bronze insert slowly releases lubricant to the rod end. Connect your grease gun to the fitting to relubricate.

These internally threaded rod ends have an oil-embedded bronze insert that slowly releases lubricant over time. Connect your grease gun to the fitting to relubricate.

An oil-embedded bronze insert slowly releases lubricant throughout the life of these internally threaded rod ends.

With at least 55° of ball swivel, these externally threaded rod ends accommodate greater misalignment than any other we offer.

Made to extremely tight tolerances, these internally threaded rod ends are for applications that require positioning accuracy, such as accelerators and other types of control linkages.

Made to extremely tight tolerances, these externally threaded rod ends are for applications that require positioning accuracy, such as accelerators and other types of control linkages.

Made of impact-resistant nylon, these externally threaded rod ends withstand corrosion as well as fuels, lyes, and weak acids. They do not require lubrication and are 80% lighter than steel rod ends.

These anodized aluminum rod ends are lighter than stainless steel rod ends and have good corrosion resistance.

These anodized aluminum rod ends are lighter than stainless steel rod ends and have good corrosion resistance. Internal threads mate with rod end bolts, threaded rods, and other components with male threads.

These externally threaded steel rod ends handle loads that are at least 25% higher than other comparably sized rod ends.

A double row of precision ball bearings allows high speeds and smooth operation.

These internally threaded rod ends have an innovative body design that keeps the ball from being pushed out when supporting thrust loads.

These black-oxide steel rod end bolts are heat treated for added strength.

These rod end bolts are good for wet and corrosive environments—for maximum mounting flexibility, cut the fully threaded shaft to whatever length you need.

These alloy steel rod end bolts have the highest tensile strength of any steel fully threaded rod end bolt we offer.

Create pivoting connections in applications that require high shear strength—the partially threaded shank of these rod end bolts withstands more side force than a fully threaded shank.

To reduce noise and vibration, these bolts have a rubber bushing—connect them to rods, pipes, tubes, and cable linkages that have female threading. They’re also known as isolated rod ends.

These alloy steel bolts have the highest tensile strength of any blank rod end bolt we offer.

Made of stainless steel, these ball joint linkages offer more corrosion resistance than steel ball joint linkages.

Able to stand up to frequent use, these linkages offer excellent wear resistance. They consist of ball joint rod ends with a ball stud attached to simplify mounting.

An oil-embedded bronze insert slowly releases lubricant to the rod end.

These internally threaded linkages have a slippery PTFE liner that reduces wear and eliminates the need for lubrication.

A slippery PTFE liner reduces wear and eliminates the need for lubrication.

Made of stainless steel, these ball joint linkages offer more corrosion resistance than steel and zinc ball joint linkages.

Use these externally threaded linkages to create inline pivoting connections.

Made of stainless steel for excellent corrosion resistance, these nuts make pivoting and hinge movements where misalignment is not a concern.

When connected to a clevis rod end, these pivot brackets allow a hydraulic cylinder to move in an arc.

Create a bend or pivot at the end of a hydraulic cylinder.

Connect a clevis rod end to a hydraulic cylinder to create a bend or pivot.

Instead of attaching your round body air cylinder directly to equipment, add a mount to best suit your application.

Simplify your setup by running fluid or air through the hollow piston in these air cylinders. The rod extends from both ends, so they can push an object and pull another at the same time, unlike standard air cylinders.

Minimize the release of particles that can damage electronics or contaminate batches as you push and pull light loads. These air cylinders are designed with seals and caps that prevent particles from escaping.

Keep tools from twisting while moving them back and forth.

Able to resist corrosive solutions and chemical environments, these cylinders withstand washdown conditions.

These cylinders have self-adjusting cushions that automatically compensate for changes in load and speed.

An extruded-aluminum body means these cylinders have no open spaces for debris to collect. They have an ISO industry-standard footprint to match common mounting patterns for easy interchangeability.

Hold your piston's position during an emergency stop or power loss to keep your load safely in place. These rod locks also prevent your piston from drifting past its stopped position as it wears and loses precision.

Add a flat mounting surface to a ball screw jack to support loads.