Your standard light switches—these switches stick out of your mounting surface and flip on and off.

Similar to a seesaw, these switches have an actuator that pivots when pressed to turn them on or off.

Install these switches inline on a lamp cord.

Also known as three-way switches, these are often used in large, open workspaces and can be wired on opposite ends of the room to control lights on the same circuit.

Wire these controls to light fixtures.

Use these switches in place of standard wall switches to automatically turn electrical equipment on or off after a set interval of time.

Switches fit single device (1 gang) outlet boxes.

Designed to work with landscape and security lighting.

Install these switches in a panel cutout.

Mount these switches to a flat surface or attach to DIN rail.

Rated NEMA 3R, these rain-tight switches protect against falling liquids and light splashing.

Rated NEMA 3S, NEMA 4X, NEMA 13, and IP66, these plastic switches resist corrosion better than aluminum switches and withstand washdowns and oil/coolant spraying.

A single-piece construction prevents the contact block from separating from the actuator in high-vibration applications.

Use these switches where ignitable gas and dust may be present. Their contact blocks are UL listed for Class I, Division 2, Groups B, C, and D hazardous locations.

Immediately cut power with a single push.

Safe to use near ignitable gases and dust, the housing on these switches seals in anything that could ignite flammable material. Yank the cable anywhere along your line to quickly cut power in emergencies.

Use fingerprints to confirm the identity of personnel before granting access to secure areas or equipment.

Detect the presence or absence of an object moving at high speeds with a light beam. These switches have a longer sensing distance than proximity and ultrasonic switches.

Set these switches to delay activation by up to fifteen seconds after detecting an object.

With a housing that’s designed to contain an explosion, these switches are safe to use in areas where ignitable concentrations of flammable or combustible gas, dust, or fibers may be present.

A raintight NEMA 3R rated enclosure protects these switches outdoors.

Prevent motors and other equipment from overheating or failing from not having enough voltage. When the supply voltage falls below 35% of the rated voltage, these switches will automatically turn off to protect the circuit from undervoltage.