Your standard light switches—these switches stick out of your mounting surface and flip on and off.

Control multiple lights in the same footprint a standard light switch fits in.

Similar to a seesaw, these switches have an actuator that pivots when pressed to turn them on or off.

Also known as three-way switches, these are often used in large, open workspaces and can be wired on opposite ends of the room to control lights on the same circuit.

Combine a switch and receptacle into a single outlet box for a small footprint.

Install these switches inline on a lamp cord.

Also known as three-way switches, these are often used in large, open workspaces and can be wired on opposite ends of the room to control lights on the same circuit.

Flat and completely smooth, these switches are easy to wipe down. With just a light tap, you can switch lights on and off, even if you’re wearing gloves.

Also known as occupancy sensors, these controls turn lights on when movement is detected and off when an area is empty. They fit standard wall plates.

Control the brightness of lights from your smartphone.

Fine-tune motion-sensing light controls from your smartphone or tablet. Mounting on the ceiling gives these light controls a clearer view of the room than wall-mount sensors, so they switch reliably.

Monitor passersby and trespassers with light and an alert. For facility security, these light controls notify you on a smartphone app when they sense motion and turn on.

Automatically turn outdoor lights on and off based on lighting conditions to conserve energy.

Never worry about turning lights on and off again. These controls turn lights on when people enter the room and off when rooms are empty or are bright enough.

Often used in large, open workspaces, these switches can be wired on opposite ends of the room to control the brightness of lights on the same circuit. They're also known as three-way switches.

Use these switches in place of standard wall switches to automatically turn electrical equipment on or off after a set interval of time.

Control equipment with high currents such as air conditioners, heaters, and ventilation fans.

Install these switches in a panel cutout to automatically turn electrical equipment on or off after a set interval.

Switches fit single device (1 gang) outlet boxes.

Program these switches to turn a device on and off at a set time and day.

Mount these switches to a flat surface or attach to DIN rail.

Control equipment with high currents, such as landscape lighting, pumps, and heaters.

For precise control of high-current equipment such as landscape lighting, pumps, and heaters, these switches schedule on/off times to the exact minute.

Install these switches in a panel cutout.

Pull the chain to send a switch signal. These switches are commonly used as replacements in lights and fans.

Safe to use near ignitable gases and dust, the housing on these switches seals in anything that could ignite flammable material. Yank the cable anywhere along your line to quickly cut power in emergencies.

Activate or deactivate fans, lights, and other devices inside your enclosure when you open or close the door.

A single-piece construction prevents the contact block from separating from the actuator in high-vibration applications.

A base that lights up draws attention to emergency stops. When pushed, these switches immediately cut power.

Clearly mark your emergency push-button switches.

Use these switches where ignitable gas and dust may be present. Their contact blocks are UL listed for Class I, Division 2, Groups B, C, and D hazardous locations.

Immediately cut power with a single push.

A red light flashes when the actuator is pushed, making it easy to see from a distance. They're rated IP65 for protection from washdowns.

Use fingerprints to confirm the identity of personnel before granting access to secure areas or equipment.

Replace the hinges on access doors or machine guards with these switches to keep your team safe from active machinery.

Detect the presence or absence of an object moving at high speeds with a light beam. These switches have a longer sensing distance than proximity and ultrasonic switches.

Mount these reflectors so they bounce the light beam from your photoelectric switch back to its sensor.

Detect irregularly shaped items with a band of light up to 10 times larger than the beam on a standard photoelectric switch.

Rated IP69K, these switches can withstand high-pressure, high-temperature washdowns and temporary submersion.

A built-in relay produces AC voltage output. These switches are often used with older programmable logic controllers (PLCs).

Maintain sanitary standards—these switches have smooth surfaces without crevices, so they prevent bacteria from building up and are easy to clean.

The highly flexible fiber-optic cable and small sensing end help you position these switches in hard to reach areas.

In a single device, continuously monitor the distance of items and turn equipment on and off based on their position.

The IP66 rated housing not only shields these switches from washdowns but also makes them durable enough to be mounted outside of an electrical panel.

Cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance. These switches are housed in a protective enclosure that resists denting, chipping, and cracking.

A raintight NEMA 3R rated enclosure protects these switches outdoors.

Small yet mighty, these switches are about as tall and wide as an index card yet durable enough to mount directly to a wall.

Identify a main switch.

Prevent motors and other equipment from overheating or failing from not having enough voltage. When the supply voltage falls below 35% of the rated voltage, these switches will automatically turn off to protect the circuit from undervoltage.

Switch lighting systems on and off—these relays can handle the high switching current on large overhead light systems.

Lengthen pull-chain light switches.

Update standard outlet boxes in closets, hallways, and storage rooms to use LED light.

To provide more mounting flexibility than other sensor and switch mounting brackets, the head rotates 360°.

The spring-loaded design absorbs impact to protect sensors and switches from damage.