These bulbs are sized to fit tight spaces such as signs, control panels, indicators, and flashlights. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

LED bulbs last longer and are more efficient than other technologies. They generate little heat and withstand vibration.

For technical drawings and 3-D models, click on a part number.

These bulbs are sized to fit tight spaces such as signs, instruments, indicators, and vehicle lights. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

These bulbs are sized to fit older telephone switchboards, signs, instruments, and indicators. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

LED bulbs last longer and are more efficient than other technologies. They generate little heat and withstand vibration.

Bulbs for General Electric ET-5 and ET-6 sockets must match the ohms listed on the back of your socket.

Wire terminals allow you to connect these bulbs to a power source through a panel. These bulbs are sized to fit into tight spaces such as signs, instruments, indicators, and flashlights. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

LED bulbs last longer and are more efficient than other technologies. They generate little heat and withstand vibration. They require a resistor to limit current (not included).

These bulbs are sized to fit tight spaces such as signs, instruments, indicators, and flashlights. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

LED bulbs last longer and are more efficient than other technologies. They generate little heat and withstand vibration.

Often used as status indicators, in displays, or to check circuit function in prototyping and testing, these bulbs have wire terminals to directly install onto circuit boards. As LEDs, they last longer, are more efficient, and produce less heat than other types of bulbs. Vibration won’t cause these bulbs to malfunction. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. They require a resistor (sold separately) to limit current.

With a 1 1/16" dia. base, these bulbs fit standard household light sockets. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. A bulb’s estimated yearly energy cost is based on 3 hours of usage per day at $0.11 per kWh.

Use these as replacement bulbs in stack lights. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

Replace incandescent bulbs in exit signs with longer-lasting, energy-efficient LEDs. These bulbs are compatible with exit signs that are viewable from one or both sides. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

Replace incandescent bulbs in exit signs with longer-lasting, energy-efficient LEDs. These bulbs are compatible with exit signs that are viewable from one or both sides. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.