We will reply to your message within an hour.
More
Also known as machinery eyebolts.
Also known as nut eyebolts, these are designed for through-hole applications.
Unlike conventional eyebolts, you can rotate the eye 360° to match the angle of your load.
Route wire and cable through the smooth eye without snagging.
The matte black-oxide finish won't reflect light, allowing the eyebolts to blend into the background.
These eyebolts retain their strength in temperatures as low as -40° F.
Create your own lifting eye by adding an eye nut to a stud or bolt.
Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back to compensate for roll and sway when lifting heavy or unbalanced loads.
Choose these hoist rings when you need to lift your load from the side.
For a more secure hold than standard hoist rings, weld these hoist rings to your load.
The ball bearing on these hoist rings makes it easy to rotate your load even after it’s suspended.
The fixed base provides added stability and allows you to lift heavy loads with smaller thread sizes.
Remove the shackle after lifting while keeping the base installed for future use.
With three different thread sizes, these hoist rings are useful when you need to lift different types of equipment.
An indicator dot changes from red to black when these hoist rings are properly tightened, eliminating the need for a torque wrench.
Easily slip these hoist rings in and out of threaded holes by pushing the button to retract their threads.
Keep on hand all the parts needed to assemble custom hoist rings.
Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.
A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.
One end has a bolt fastened with a nut and cotter pin for a more secure connection than flush-pin connectors.
The pins have flush ends to prevent snagging and accidental disengagement.
Meeting strict standards for lifting, yet flexible and lightweight, these shackles wrap around a variety of lifting points.
The strongest shackles we offer, these connectors have a pin with flush ends that prevents snagging and accidental disengagement.
Also known as master and sling links, a large inner diameter provides room to attach multiple connectors or legs on a sling.
Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.
Use these links for general lifting applications.
Providing better load distribution and alignment than single oblong links, these reduce wear in three and four leg slings.
Hammer the pin through the center to assemble these links. They’re also known as hammer locks and sling links.
The wide end of these links has more room for attachments than standard figure-eight links.
Once secured with the included locking pin, these links must be cut off to be removed.
The flat side lets webbing and strapping lay flat, so they don’t slide and bunch.
A pear-shaped link and hook for chain shortening allow you to create an adjustable-length chain sling.
A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.
Screw these hooks into place with their threaded shank.
Weld these hooks into place to create a permanent lifting device.
Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens.
Slide the clevis pin into these hooks to attach chain. A latch ensures rope, chain, and fittings won't detach from the hook when the load slackens.
The opening on these hooks fits large anchor points and allows chain to slide through when the hook is closed. They have a spring latch to ensure rope, chain, and fittings won't detach from the hook when the load slackens.
These rotate for easy positioning before a load is applied. They have a latch to ensure rope, chain, and fittings won't separate from the hook when the load slackens.
A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.
These have a removable half-link to attach large rings, links, and other closed fittings.
Garolite insulation prevents electrical current from passing to hoists and other lifting equipment, causing damage. Because they're electrical insulating, these hooks are often used to hold a workpiece while welding.
Insert in eyes, links, rings, and other connectors with small openings. Also known as J-hooks.
For a more secure connection than standard hooks, these hooks have a latch that locks closed when a load is lifted. A ball-bearing swivel allows them to rotate under a load.
For a more secure connection than standard hooks, the latch locks closed when a load is applied.
These rotate for easy positioning before a load is applied.
Screw these hooks into place and secure with the included nut.
A ball-bearing swivel allows these hooks to rotate under load. Attach to chain by inserting the included pin through a link.
Rotate these hooks for easy positioning before lifting your load. They have a latch that locks when a load is applied for a more secure connection than standard hooks.
For a more secure connection than standard hooks, these clevis hooks have a latch that locks closed when a load is applied.
These have a latch that locks closed when a load is applied for a more secure connection than standard hooks. They rotate for easy positioning before a load is applied.
A spring-loaded pin ensures chain won't separate from the hook when the load slackens. Connect your chain to the clevis end.
A spring-loaded pin ensures chain won't separate from the hook when the load slackens. Connect your chain to the eye end.
Slide the clevis pin into these hooks to attach chain, no extra fittings needed.
With a narrow opening and contoured sides, these securely hold a single link of chain to prevent overtightening when lifting a load.
Use these on thick molds, castings, and objects that don't have attachment points. Also known as foundry hooks.
Also known as foundry hooks, use these on thick molds, castings, and objects that don't have attachment points.
The flat eye on these hooks keeps webbing and strapping flat, so it doesn’t bunch.
Also known as Type 3 slings, the eyes lie in a flat position for easy removal from beneath loads.
Slings are reinforced for additional abrasion resistance.
Also known as Type 4 slings, the eyes are turned 90° so they can form a choker configuration more easily than with flat-eye slings.
Also known as Type 5 and endless slings, these slings last longer than other web slings with eyes because they can be rotated to change the load-bearing point.
Slings have plastic-coated fibers woven into the edges for added abrasion resistance.
Also known as cargo slings, these wide slings provide extra stability and balance when lifting bulky loads.
Securely hook these slings to a load that has lifting eyes.
Designed for use in the choker configuration, the end fittings keep these slings correctly positioned during use.
Latching hooks allow you to quickly release a load.
Adjust the chain length and number of legs without changing slings.
Prevent accidental opening of the hook with these locking hooks.
Grab hooks can securely hold onto a single link of chain to shorten a leg or create loops.
These slings attach quickly and securely to loads with lift attachments.
These slings are more abrasion and cut resistant than web and round slings, yet lighter in weight than mesh and chain slings.
Similar to a finger trap, the loop adjusts freely when loose and holds tight when tension is applied.
Made of abrasion- and chemical-resistant Dyneema, these slings are a lightweight alternative to wire rope slings.
Also known as Type 3 slings, the flat eye on each end allows the sling to quickly change into the choker, vertical, or basket configuration.
These slings have nylon strips sewn into the sleeve to slow deterioration, making them three times more abrasion resistant than other round slings.
Also known as Type 5 and endless slings, these slings last longer than slings with eyes because they can be rotated to change the load-bearing point.
Made of galvanized steel mesh to be more cut and abrasion resistant than web or round slings, yet maintain the flexibility to conform to a load.