Fast-Action Bar Clamps/Spreaders
Each arm slides freely for quick, one-handed positioning. They lock when the screws are tightened onto a workpiece. Reverse the arms to use these clamps as spreaders.
For technical drawings and 3-D models, click on a part number.
Parallel-Jaw Bar Clamps/Spreaders
The large, flat jaws remain parallel when clamping to apply even pressure without denting or marring the workpiece. Reverse the arms to use these clamps as spreaders. Pull the handle to lock or release the clamping arm.
For technical drawings and 3-D models, click on a part number.
Opening | Spreader Opening | |||||||
|---|---|---|---|---|---|---|---|---|
| Max. | Min. | Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Each | |
| 12" | 0" | 15 5/16" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 000000 |
| 18" | 0" | 21 1/2" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 00000 |
| 24" | 0" | 28 3/4" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 00000 |
| 40" | 0" | 44 1/2" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 00000 |
| 50" | 0" | 52 1/2" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 00000 |
Bar Clamps
Pull the lever to slide the clamping arm along the bar; release to lock in place. Use the handle for final tightening.
For technical drawings and 3-D models, click on a part number.
Opening | ||||||
|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Each | |
| 6" | 0" | 3" | 1,200 | Iron | 0000000 | 000000 |
| 12" | 0" | 3" | 1,000 | Steel | 0000000 | 00000 |
| 12" | 0" | 5" | 1,200 | Steel | 0000000 | 00000 |
| 18" | 0" | 3" | 1,000 | Steel | 0000000 | 00000 |
| 18" | 0" | 5" | 1,200 | Steel | 0000000 | 00000 |
| 24" | 0" | 3" | 1,000 | Steel | 0000000 | 00000 |
| 24" | 0" | 5" | 1,200 | Steel | 0000000 | 00000 |
| 30" | 0" | 3" | 1,000 | Steel | 0000000 | 00000 |
| 31 1/2" | 0" | 5 1/2" | 1,200 | Steel | 0000000 | 00000 |
| 36" | 0" | 3" | 1,000 | Steel | 0000000 | 00000 |
| 39 3/8" | 0" | 5 1/2" | 1,200 | Steel | 0000000 | 00000 |
| 59" | 0" | 5 1/2" | 1,200 | Steel | 0000000 | 00000 |
Any-Length Bar Clamps
Place the arms on a pipe that is threaded at one end and at least 12" long to create your own bar clamp. Turn the handle to tighten. The clamping surfaces have removable plastic pads that prevent damage to material. These are also known as pipe clamps.
For technical drawings and 3-D models, click on a part number.
Heavy Duty Bar Clamps
Hold up to five times the capacity of standard bar clamps. Pull the lever to slide the clamping arm along the bar; release to lock in place. Use the handle for final tightening. These are also known as I-beam clamps.
For technical drawings and 3-D models, click on a part number.
Opening | ||||||
|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Each | |
| 24" | 0" | 1 13/16" | 6,000 | Steel | 000000 | 000000 |
| 30" | 0" | 2" | 5,100 | Steel | 000000 | 00000 |
| 36" | 0" | 1 13/16" | 6,000 | Steel | 000000 | 00000 |
| 48" | 0" | 1 13/16" | 6,000 | Steel | 000000 | 00000 |
| 60" | 0" | 1 13/16" | 6,000 | Steel | 000000 | 00000 |
| 72" | 0" | 1 13/16" | 6,000 | Steel | 000000 | 000000 |
| 84" | 0" | 2" | 5,100 | Steel | 000000 | 00000 |
| 96" | 0" | 2" | 5,100 | Steel | 000000 | 00000 |
Vibration-Resistant Fast-Action Bar Clamps
Pull the handle to lock the jaw in place and prevent loosening caused by vibration. The clamping arm slides freely along the bar for quick, one-handed positioning. These clamps are also known as F- or L-clamps.
For technical drawings and 3-D models, click on a part number.
Fast-Action Bar Clamps
The clamping arm slides freely along the bar for quick, one-handed positioning. Tighten the screw onto a workpiece and the arm locks in place. These clamps are also known as F- or L-clamps.
For technical drawings and 3-D models, click on a part number.
Opening | ||||||
|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Each | |
| 4" | 0" | 2 1/4" | 400 | Zinc-Plated Steel | 0000000 | 000000 |
| 6" | 0" | 4 3/4" | 1,330 | Zinc-Plated Steel | 0000000 | 00000 |
| 8" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 00000 |
| 9" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 00000000 | 00000 |
| 10" | 0" | 4 3/4" | 1,000 | Zinc-Plated Steel | 00000000 | 00000 |
| 12" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 000000 |
| 12" | 0" | 8" | 1,700 | Zinc-Plated Steel | 0000000 | 000000 |
| 16" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 000000 |
| 18" | 0" | 4 3/4" | 1,980 | Zinc-Plated Steel | 00000000 | 000000 |
| 20" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 000000 |
| 24" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 000000 |
| 24" | 0" | 8" | 1,700 | Zinc-Plated Steel | 0000000 | 000000 |
| 36" | 0" | 5 1/2" | 2,800 | Zinc-Plated Steel | 0000000 | 000000 |
| 48" | 0" | 5 1/2" | 2,800 | Zinc-Plated Steel | 0000000 | 000000 |
| 60" | 0" | 5 1/2" | 2,800 | Zinc-Plated Steel | 0000000 | 000000 |
Heavy Duty Fast-Action Bar Clamps
These clamps have twice the capacity of standard fast-action bar clamps. The clamping arm slides freely along the bar for quick, one-handed positioning. Tighten the screw onto a workpiece and the arm locks in place. These are also known as F- or L-clamps.
For technical drawings and 3-D models, click on a part number.
Opening | |||||||
|---|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Swivel Range of Motion | Each | |
| 12" | 0" | 7" | 4,880 | Zinc-Plated Steel | 20° | 0000000 | 0000000 |
| 12" | 0" | 7" | 4,880 | Zinc-Plated Steel | 35° | 0000000 | 000000 |
| 18" | 0" | 7" | 4,880 | Zinc-Plated Steel | 20° | 0000000 | 000000 |
| 18" | 0" | 7" | 4,880 | Zinc-Plated Steel | 35° | 0000000 | 000000 |
| 36" | 0" | 7" | 4,880 | Zinc-Plated Steel | 20° | 0000000 | 000000 |
| 36" | 0" | 7" | 4,880 | Zinc-Plated Steel | 35° | 0000000 | 000000 |
Extra Heavy Duty Fast-Action Bar Clamps
For the most demanding jobs, these clamps have almost five times the capacity of standard fast-action bar clamps. The clamping arm slides freely along the bar for quick, one-handed positioning. Tighten the screw onto a workpiece and the arm locks in place. These are also known as F- or L-clamps.
For technical drawings and 3-D models, click on a part number.
Bar Clamps for Recessed Areas
Also known as J-clamps, these provide additional clearance to reach around obstructions and clamp workpieces in recessed areas. The clamping arm slides freely along the bar for quick, one-handed positioning. Use the handle for final tightening.
For technical drawings and 3-D models, click on a part number.
Edge-Clamping Adapters for Bar Clamps
Attach to your bar clamp to hold material on three sides. This adapter fits most standard bar clamps.
For technical drawings and 3-D models, click on a part number.
| For Max. Bar Thick. | Holding Capacity | Body Material | Each | |
| 1/2" | Not Rated | Powder-Coated Iron | 0000000 | 000000 |
Bar Clamps for Round and Angled Material
The swivel pad pivots to grip nearly any shape of material. The clamping arm slides freely along the bar for quick, one-handed positioning. Use the handle for final tightening.
For technical drawings and 3-D models, click on a part number.
Opening | ||||||
|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Each | |
| 12" | 0" | 5 1/2" | 2,645 | Steel | 000000 | 000000 |
Extended-Reach Bar Clamps
Clamp much farther in from the edge of the workpiece than with standard bar clamps. The clamping arm slides freely along the bar for quick, one-handed positioning. Use the handle for final tightening.
For technical drawings and 3-D models, click on a part number.