McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    86 Products
    About Leveling Mounts
    industrial info icon

    Choose the right leveling mounts for your floor conditions, equipment weight, and vibration-control needs.

    Swivel Leveling Mounts with Threaded Stud
    3D CAD models available

    Image of Product. With Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Stud, With Cushion.

    With Cushion

    Image of Product. Without Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Stud, Without Cushion.

    Without Cushion

    Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.
    303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    316 Stainless Steel Base—Our most corrosion-resistant metal mounts, these hold up in just about any environment. They won’t degrade or become pitted, even when exposed to harsh cleaners and chemicals.
    Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.
    Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
    Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.
    Without Cushion
    With Rubber Cushion
    Thread Size
    Thread
    Lg., mm
    Swivel Range
    of Motion
    Base Dia.,
    mm
    Cap. per
    Mount, lb.
    Overall
    Ht., mm
    Each
    Cap. per
    Mount, lb.
    Overall
    Ht., mm
    Each
    Nickel-Plated Steel Base and Stud
    M12 × 1.75 mm517.5°484,95079000000000000003,7008300000000000000
     
    Zinc-Yellow-Chromate-Plated Steel Base and Stud
    M12 × 1.75 mm517.5°484,950790000000000003,74083000000000000
     
    303 Stainless Steel Base and Stud
    M12 × 1.75 mm517.5°484,950790000000000003,740830000000000000
     
    316 Stainless Steel Base and Stud
    M12 × 1.75 mm517.5°484,95079000000000000______00
     

    Stay-Put Swivel Leveling Mounts with Threaded Stud
    3D CAD models available

    Bolt down machines so they don’t creep across the floor or tip over. These mounts have one or more punch-out holes for securing equipment that you don’t need to move. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
    Two Mounting Holes
    Image of Product. Front orientation. Leveling Mounts. Stay-Put Swivel Leveling Mounts with Threaded Stud, Two Mounting Holes.
    Glass-Filled Nylon Base and Zinc-Plated Steel Stud—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.
    Glass-Filled Nylon Base and 303 Stainless Steel Stud—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals.
    Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
    Mounting
    Holes, mm
    Without Cushion
    With Rubber Cushion
    Thread Size
    Thread
    Lg., mm
    Swivel Range
    of Motion
    Base Dia.,
    mm
    Mounting Fasteners
    Included
    Dia.
    Ctr.-to-Ctr.
    Lg.
    Cap. per
    Mount, lb.
    Overall
    Ht., mm
    Each
    Cap. per
    Mount, lb.
    Overall
    Ht., mm
    Each
    Glass-Filled Nylon Base and Zinc-Plated Steel Stud
    M12 × 1.75 mm767.5°51No6.433.84,0001050000000000004,000106.60000000000000
    M12 × 1.75 mm767.5°101.9No12.568.85,0001090000000000000______00
    M12 × 1.75 mm767.5°102No11.968.8______005,000110.60000000000000
    M12 × 1.75 mm1027.5°51No6.433.84,0001300000000000004,000131.6000000000000
    M12 × 1.75 mm1027.5°76No8.955.95,00013000000000000005,000131.60000000000000
    M12 × 1.75 mm1027.5°102No11.968.85,00013500000000000005,000136.60000000000000
    M12 × 1.75 mm1527.5°51No6.433.84,000181000000000004,000182.6000000000000
    M12 × 1.75 mm1527.5°76No8.955.95,000181000000000000______00
    M12 × 1.75 mm1527.5°102No11.968.85,0001850000000000005,000186.6000000000000
    M12 × 1.75 mm2037.5°51No6.433.84,00023200000000000004,000233.60000000000000
    M12 × 1.75 mm2037.5°76No8.955.9______005,000233.60000000000000
    M12 × 1.75 mm2037.5°102No11.968.85,00023600000000000005,000237.60000000000000
     
    Glass-Filled Nylon Base and 303 Stainless Steel Stud
    M12 × 1.75 mm767.5°51No6.433.84,0001050000000000004,000106.6000000000000
    M12 × 1.75 mm1027.5°76No8.955.95,0001300000000000000______00
    M12 × 1.75 mm1027.5°102No11.968.85,0001350000000000000______00
    M12 × 1.75 mm1527.5°51No6.433.84,0001810000000000004,000182.6000000000000
    M12 × 1.75 mm1527.5°102No11.968.85,0001850000000000005,000186.6000000000000
     

    Vibration-Damping Swivel Leveling Mounts with Threaded Stud
    3D CAD models available

    Image of Product. Front orientation. Leveling Mounts. Vibration-Damping Swivel Leveling Mounts with Threaded Stud.
    A rubber cushion reduces vibration to protect components and extend your machine’s life. These mounts have a ball-and-socket joint in the base that swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.
    304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.
    With Rubber Cushion
    Thread Size
    Thread
    Lg.
    Deflection
    @ Cap.
    Swivel Range
    of Motion
    Base
    Dia.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Each
    304 Stainless Steel Base and Stud
    M12 × 1.75 mm4 3/4"0.07"7.5°2 5/8"5005 11/16"0000000000000
    M12 × 1.75 mm4 3/4"0.12"7.5°3 7/8"1,0006 1/8"000000000000
    M12 × 1.75 mm4 3/4"0.12"7.5°3 7/8"2,0006 1/8"000000000000
     

    Stay-Put Vibration-Damping Swivel Leveling Mounts with Threaded Stud
    3D CAD models available

    Bolt down machines so they don’t creep across the floor or tip over. These mounts have one or more holes for securing equipment that you don’t need to move. They also have a rubber cushion that reduces vibration to extend your machine’s life. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
    One Offset Mounting Hole
    Image of Product. Front orientation. Leveling Mounts. Stay-Put Vibration-Damping Swivel Leveling Mounts with Threaded Stud, One Offset Mounting Hole.
    The mounting hole extends out from underneath your machine to give you more room to drill and install fasteners.
    304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    Rubber Cushion—In addition to reducing vibration, the cushion cuts down on noise and protects floors from scrapes and gouges.
    With Rubber Cushion
    Thread Size
    Thread
    Lg.
    Deflection
    @ Cap.
    Swivel Range
    of Motion
    Base
    Dia.
    Mounting Fasteners
    Included
    Mounting
    Hole Dia.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Each
    304 Stainless Steel Base and Stud
    M12 × 1.75 mm3 15/16"0.06"2 15/16"No5/8"1,7704 13/16"00000000000000
     

    Shock-Absorbing Swivel Leveling Mounts with Threaded Stud
    3D CAD models available

    Often used on presses, lathes, and die cutters, these mounts protect machines and floors from damage when equipment suddenly starts and stops. They have a solid rubber base, similar to a hockey puck, that isolates shock. The base also cuts down on noise and grips the floor so equipment doesn't slide when it's vibrating. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
    Square Rubber Base and Zinc-Plated Steel Stud
    Image of Product. Front orientation. Leveling Mounts. Shock-Absorbing Swivel Leveling Mounts with Threaded Stud, Square Base.
    Base
    Thread Size
    Thread
    Lg.
    Cap. per
    Mount, lb.
    Deflection
    @ Cap.
    Swivel Range
    of Motion
    Lg.
    Wd.
    Overall
    Ht.
    Each
    M12 × 1.75 mm2 5/8"3500.13"7.5°3"3"3 7/16"00000000000000
    M12 × 1.75 mm2 5/8"7000.13"7.5°3"3"3 7/16"0000000000000
    Round Rubber Base and Zinc-Plated Steel Stud
    Image of Product. Front orientation. Leveling Mounts. Shock-Absorbing Swivel Leveling Mounts with Threaded Stud, Round Base.
    Thread Size
    Thread
    Lg.
    Cap. per
    Mount, lb.
    Deflection
    @ Cap.
    Swivel Range
    of Motion
    Base
    Dia.
    Overall
    Ht.
    Each
    M12 × 1.75 mm2 3/8"5000.13"7.5°3"3 11/16"00000000000000
    M12 × 1.75 mm2 3/8"1,0000.13"7.5°3"3 11/32"0000000000000

    Rigid Leveling Mounts with Threaded Stud
    3D CAD models available

    Image of Product. Front orientation. Leveling Mounts. Rigid Leveling Mounts with Threaded Stud, Style 1.

    Style 1

    Level equipment on uneven floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of your machine.
    303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    Zinc-Plated Steel Base—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.
    Plastic Cushion—The plastic bottom won't scratch or scuff floors when you’re moving equipment.
    Style
    Thread Size
    Thread
    Lg., mm
    Cap. per
    Mount, lb.
    Base Dia.,
    mm
    Overall
    Ht., mm
    Each
    Zinc-Plated Steel Base and Stud with Plastic Cushion
    1M12 × 1.75 mm5125061760000000000000
    1M12 × 1.75 mm515007176000000000000
    1M12 × 1.75 mm10225061127000000000000
    1M12 × 1.75 mm10250071127000000000000
    1M12 × 1.75 mm102500811270000000000000
    1M12 × 1.75 mm152500811780000000000000
     
    303 Stainless Steel Base and Stud with Plastic Cushion
    1M12 × 1.75 mm102250611270000000000000
    1M12 × 1.75 mm102500811300000000000000
     

    Swivel Leveling Mounts with Threaded Hole
    3D CAD models available

    Image of Product. With Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Hole, With Cushion.

    With Cushion

    Image of Product. Without Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Hole, Without Cushion.

    Without Cushion

    Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.
    Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
    303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.
    Without Cushion
    With Rubber Cushion
    Thread Size
    Thread
    Dp., mm
    Swivel Range
    of Motion
    Base Dia.,
    mm
    Cap. per
    Mount, lb.
    Overall
    Ht., mm
    Each
    Cap. per
    Mount, lb.
    Overall
    Ht., mm
    Each
    Zinc-Yellow-Chromate-Plated Steel Base
    M12 × 1.75 mm117.5°484,9502900000000000003,740320000000000000
     
    303 Stainless Steel Base
    M12 × 1.75 mm11.17.5°484,950290000000000003,74532000000000000
     

    High-Capacity Press-Fit Leveling Mount Inserts
    3D CAD models available

    Rated for high load capacity, use these inserts to connect threaded leveling mounts to machinery, instrument bases, and conveyor equipment with tubular legs. These inserts have pass-through holes that are partially threaded at the base. Tap mounts into place with a rubber hammer.
    Square Base
    Image of ProductInUse. Front orientation. Leveling Mount Inserts. High-Capacity Press-Fit Leveling Mount Inserts, Square Base.
    Image of Attribute. Front orientation. Contains Annotated.
    For Leg
    Outer
    Lg.
    Outer
    Wd.
    Inner
    Lg.
    Inner
    Wd.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Thread Size
    Thread
    Dp.
    Temp. Range,
    ° F
    Each
    Plastic with Brass Insert
    1 1/2"1 1/2"1 5/16"1 5/16"1,5001 11/16"M12 × 1.75 mm1"-20 to 1800000000000000
    2"2"1 3/4"1 3/4"2,0002"M12 × 1.75 mm1"-20 to 180000000000000
     
    Round Base
    Image of ProductInUse. Front orientation. Leveling Mount Inserts. High-Capacity Press-Fit Leveling Mount Inserts, Round Base.
    Image of Attribute. Front orientation. Contains Annotated.
    For
    Leg
    ID
    OD
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Thread Size
    Thread
    Dp.
    Temp. Range,
    ° F
    Each
    Plastic with Brass Insert
    1 5/16"1 1/2"1,5001 11/16"M12 × 1.75 mm1"-20 to 1800000000000000
    1 13/16"2"2,0001 15/16"M12 × 1.75 mm1"-20 to 180000000000000
     

    Reinforced Threaded-Stud Bumpers
    3D CAD models available

    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Stud Bumpers, Style 1.

    Style 1

    With a metal core for added strength, these bumpers withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers, vibration dampers, and noise reducers. No separate fasteners are needed—just twist them into a threaded hole.
    Style 1
    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Stud Bumpers, Style 1.
    Image of Attribute. Front orientation. Contains Annotated. Reinforced Threaded-Stud Bumpers, Style 1.
    Multipurpose Neoprene—A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.
    Abrasion-Resistant Polyurethane Rubber—Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Lg.,
    mm
    OD,
    mm
    Ht.,
    mm
    Overall
    Ht., mm
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Stud
    Material
    Core
    Material
    Nonmarking
    For Use
    Outdoors
    Each
    Multipurpose Neoprene
    M12 × 1.75 mm30323262Durometer 40AMedium SoftBlack-40 to 200SteelSteelYesYes00000000000000
    M12 × 1.75 mm30323262Durometer 75AHardBlack-40 to 200SteelSteelYesYes0000000000000
     
    Abrasion-Resistant Polyurethane Rubber
    M12 × 1.75 mm30323262Durometer 40AMedium SoftRed-60 to 200SteelSteelYesYes000000000000
    M12 × 1.75 mm30323262Durometer 80AHardRed-60 to 200SteelSteelYesYes0000000000000
     

    Load-Rated Reinforced Threaded-Stud Bumpers
    3D CAD models available

    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Stud Bumpers, Style 1.

    Style 1

    These bumpers are tested to ensure they'll support the load of your application. They'll bear the weight of everything from a 50-pound saw to a 5,000-pound air compressor. All have a metal base plate for added strength and a longer service life than all-rubber bumpers. No separate fasteners are needed—just twist them into a threaded hole.
    Style 1
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Stud Bumpers, Style 1.
    Image of Attribute. Front orientation. Contains Annotated. Load-Rated Reinforced Threaded-Stud Bumpers, Style 1.
    Natural Rubber—These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.
    Stainless Steel Stud—Unlike bumpers with steel studs, these handle repeated washdowns without corroding.
    Steel Stud—Durable and economical, these are the choice for most jobs.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Lg.,
    mm
    OD,
    mm
    Ht.,
    mm
    Max. Load,
    lb.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Nonmarking
    For Use
    Outdoors
    Each
    Natural Rubber with Steel Stud and Base Plate
    M12 × 1.75 mm3775252,170Durometer 55AMediumBlack-40 to 170NoNo00000000000000
    M12 × 1.75 mm3775254,670Durometer 70AHardBlack-40 to 170NoNo0000000000000
    M12 × 1.75 mm3775401,500Durometer 55AMediumBlack-40 to 170NoNo0000000000000
    M12 × 1.75 mm3775402,060Durometer 70AHardBlack-40 to 170NoNo0000000000000
    M12 × 1.75 mm377550980Durometer 50AMediumBlack-10 to 150NoNo00000000000000
    M12 × 1.75 mm3775503,040Durometer 70AHardBlack-40 to 170NoNo0000000000000
     
    Natural Rubber with Corrosion-Resistant Stainless Steel Stud and Base Plate
    M12 × 1.75 mm3775252,170Durometer 55AMediumBlack-40 to 170NoNo0000000000000
     

    Reinforced Threaded-Hole Bumpers
    3D CAD models available

    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Hole Bumpers, Style 1.

    Style 1

    With a metal core or base plate for added strength, these bumpers withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers, vibration dampers, and noise reducers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.
    Style 1
    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Hole Bumpers, Style 1.
    Image of Attribute. Front orientation. Contains Annotated. Reinforced Threaded-Hole Bumpers, Style 1.
    Multipurpose Neoprene—A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.
    Abrasion-Resistant Polyurethane Rubber—Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Dp.,
    mm
    OD,
    mm
    Ht.,
    mm
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Core
    Material
    Nonmarking
    For Use
    Outdoors
    Each
    Multipurpose Neoprene
    M12 × 1.25 mm133232Durometer 40AMedium SoftBlack-40 to 200SteelNoYes00000000000000
    M12 × 1.25 mm133232Durometer 75AHardBlack-40 to 200SteelNoYes0000000000000
    M12 × 1.75 mm133232Durometer 70AHardBlack-40 to 200SteelNoYes0000000000000
     
    Abrasion-Resistant Polyurethane Rubber
    M12 × 1.25 mm133232Durometer 40AMedium SoftRed-40 to 200SteelNoYes000000000000
    M12 × 1.25 mm133232Durometer 50AMediumRed-40 to 200SteelNoYes0000000000000
    M12 × 1.25 mm133232Durometer 60AMedium HardRed-40 to 200SteelNoYes0000000000000
    M12 × 1.25 mm133232Durometer 85AHardRed-40 to 200SteelNoYes0000000000000
    M12 × 1.75 mm133232Durometer 40AMedium SoftBlack-40 to 200SteelNoYes0000000000000
    M12 × 1.75 mm133232Durometer 95AExtra HardBlack-40 to 200SteelNoYes0000000000000
     

    Load-Rated Reinforced Threaded-Hole Bumpers
    3D CAD models available

    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Hole Bumpers, Style 1.
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Hole Bumpers, Style 2.

    Style 1

    Style 2

    These bumpers are tested to ensure they'll support the load of your application. They'll bear the weight of everything from a 50-pound saw to a 2,000-pound air compressor. All have a metal base plate for added strength and a longer service life than all-rubber bumpers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.
    Style 1
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Hole Bumpers, Style 1.
    Image of Attribute. Front orientation. Contains Annotated. Load-Rated Reinforced Threaded-Hole Bumpers, Style 1.
    Natural Rubber—These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Dp.,
    mm
    OD,
    mm
    Ht.,
    mm
    Max. Load,
    lb.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Nonmarking
    For Use
    Outdoors
    Each
    Natural Rubber with Steel Base Plate
    M12 × 1.75 mm1275301,770Durometer 55AMediumBlack-40 to 170YesNo00000000000000
    M12 × 1.75 mm1275401,010Durometer 55AMediumBlack-20 to 150YesNo00000000000000
    M12 × 1.75 mm1275402,060Durometer 70AHardBlack-40 to 170YesNo0000000000000
    M12 × 1.75 mm127550980Durometer 55AMediumBlack-20 to 150YesNo00000000000000
     
    Natural Rubber with Corrosion-Resistant Stainless Steel Base Plate
    M12 × 1.75 mm1275301,770Durometer 55AMediumBlack-40 to 170YesNo0000000000000
    M12 × 1.75 mm1275401,010Durometer 55AMediumBlack-20 to 150YesNo00000000000000
     
    Style 2
    Image of Product. Front orientation. Bumpers. Load-Rated Reinforced Threaded-Hole Bumpers, Style 2.
    Image of Attribute. Front orientation. Contains Annotated. Load-Rated Reinforced Threaded-Hole Bumpers, Style 2.
    Natural Rubber—These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Dp.,
    mm
    OD,
    mm
    Ht.,
    mm
    Max. Load,
    lb.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Nonmarking
    For Use
    Outdoors
    Each
    Natural Rubber with Steel Base Plate
    M12 × 1.75 mm127589570Durometer 70AHardBlack-40 to 170YesNo00000000000000
     
    back to top