Filter by
Thread Size
Mount Movement
Thread Type
About Leveling Mounts
Choose the right leveling mounts for your floor conditions, equipment weight, and vibration-control needs.
Swivel Leveling Mounts with Threaded Stud
 |
With Cushion |
 |
Without Cushion |
Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.
303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
Black-Oxide Steel Base—With a matte black appearance, these mounts create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.
Plastic Base—These mounts are economical yet resistant to grease, oil, and chemicals that pool on the floor. Often used on small, lightweight machines, they have about 25% the capacity of similarly sized metal mounts.
Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.
Without Cushion | With Rubber Cushion | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Swivel Range of Motion | Base Dia. | Cap. per Mount, lb. | Overall Ht. | Each | Cap. per Mount, lb. | Overall Ht. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Nickel-Plated Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8"-24 | 2" | 7.5° | 1 1/4" | 3,300 | 2 7/8" | 00000000 | 000000 | 2,475 | 3" | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Zinc-Yellow-Chromate-Plated Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8"-24 | 2" | 7.5° | 1 1/4" | 3,300 | 2 7/8" | 00000000 | 00000 | 2,475 | 3" | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Black-Oxide Steel Base and Zinc-Plated Steel Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8"-24 | 2" | 7.5° | 1 1/4" | 3,300 | 2 7/8" | 00000000 | 00000 | 2,475 | 3" | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
303 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8"-24 | 2" | 7.5° | 1 1/4" | 3,300 | 2 7/8" | 00000000 | 00000 | 2,475 | 3" | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Plastic Base and Zinc-Plated Steel Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8"-24 | 2" | 7.5° | 1 1/4" | 250 | 2 7/8" | 00000000 | 0000 | 250 | 3" | 00000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stay-Put Swivel Leveling Mounts with Threaded Stud
Bolt down machines so they don’t creep across the floor or tip over. These mounts have one or more punch-out holes for securing equipment that you don’t need to move. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
Two Mounting Holes
 |
Glass-Filled Nylon Base and Zinc-Plated Steel Stud—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.
Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
Mounting Holes | Without Cushion | With Rubber Cushion | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Cap. per Mount, lb. | Swivel Range of Motion | Base Dia. | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. Lg. | Overall Ht. | Each | Overall Ht. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Glass-Filled Nylon Base and Zinc-Plated Steel Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8"-24 | 2" | 3,300 | 7.5° | 2" | No | 1/4" | 1 5/16" | 3 1/8" | 00000000 | 000000 | 3 3/16" | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Easy-Install Vibration-Damping Rigid Leveling Mounts with Threaded Stud
 |
A two-piece design requires less clearance to install than one-piece mounts. Raise your machine just enough to slide the base underneath, then insert the stud from above through a threaded or unthreaded hole to keep equipment level on uneven floors. A rubber cushion reduces vibration to protect components and extend your machine’s life.
Steel Base—These mounts are best for dry environments since moisture will cause them to rust.
Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.
Thread Size | Thread Lg. | Cap. per Mount, lb. | Deflection @ Cap. | Base Dia. | Overall Ht. | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Steel Base and Zinc-Plated Steel Stud with Rubber Cushion | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8"-24 | 3" | 300 | 0.06" | 3 1/8" | 4 1/2" | 00000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Swivel Leveling Mounts with Threaded Hole
 |
With Cushion |
 |
Without Cushion |
Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.
Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.
Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.
Without Cushion | With Rubber Cushion | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Dp. | Swivel Range of Motion | Base Dia. | Cap. per Mount, lb. | Overall Ht. | Each | Cap. per Mount, lb. | Overall Ht. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Nickel-Plated Steel Base | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8"-24 | 3/8" | 7.5° | 1 1/4" | __ | __ | __ | 00 | 2,475 | 1" | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Zinc-Yellow-Chromate-Plated Steel Base | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8"-24 | 3/8" | 7.5° | 1 1/4" | 3,300 | 7/8" | 00000000 | 00000 | 2,475 | 1" | 00000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
303 Stainless Steel Base | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8"-24 | 3/8" | 7.5° | 1 1/4" | 3,300 | 7/8" | 00000000 | 00000 | __ | __ | __ | 00 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Reinforced Threaded-Hole Bumpers
 |
Style 1 |
With a metal core or base plate for added strength, these bumpers withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers, vibration dampers, and noise reducers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.
Style 1
|
 |
Multipurpose Neoprene—A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.
Abrasion-Resistant Polyurethane Rubber—Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
Oil-Resistant Buna-N—These bumpers resist oil and fuels better than other rubber bumpers. Use them on frequently lubricated machinery and oily equipment, such as engines and pumps.
Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
Thread | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Dp. | OD | Ht. | Hardness | Hardness Rating | Color | Temp., ° F | Core Material | Nonmarking | For Use Outdoors | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Multipurpose Neoprene | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8"-24 | 1/2" | 1 1/4" | 1 1/4" | Durometer 40A | Medium Soft | Black | -40 to 200 | Steel | No | Yes | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8"-24 | 1/2" | 1 1/4" | 1 1/4" | Durometer 75A | Hard | Black | -40 to 200 | Steel | No | Yes | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Abrasion-Resistant Polyurethane Rubber | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8"-24 | 1/2" | 1 1/4" | 1 1/4" | Durometer 30A | Soft | Red | -40 to 200 | Steel | No | Yes | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8"-24 | 1/2" | 1 1/4" | 1 1/4" | Durometer 40A | Medium Soft | Red | -40 to 200 | Steel | No | Yes | 000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8"-24 | 1/2" | 1 1/4" | 1 1/4" | Durometer 50A | Medium | Red | -40 to 200 | Steel | No | Yes | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8"-24 | 1/2" | 1 1/4" | 1 1/4" | Durometer 60A | Medium Hard | Black | -40 to 200 | Steel | No | Yes | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8"-24 | 1/2" | 1 1/4" | 1 1/4" | Durometer 85A | Hard | Red | -40 to 200 | Steel | No | Yes | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8"-24 | 1/2" | 1 1/4" | 1 1/4" | Durometer 95A | Extra Hard | Black | -40 to 200 | Steel | No | Yes | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Oil-Resistant Buna-N | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/8"-24 | 1/2" | 1 1/4" | 1 1/4" | Durometer 40A | Medium Soft | White | -60 to 175 | Steel | Yes | No | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
