Filter by
Thread Size
Mount Movement
Thread Type
DFARS Compliance
About Leveling Mounts
Choose the right leveling mounts for your floor conditions, equipment weight, and vibration-control needs.
Swivel Leveling Mounts with Threaded Stud
 |
With Cushion |
 |
Without Cushion |
Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.
Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.
Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
Black-Oxide Steel Base—With a matte black appearance, these mounts create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
316 Stainless Steel Base—Our most corrosion-resistant metal mounts, these hold up in just about any environment. They won’t degrade or become pitted, even when exposed to harsh cleaners and chemicals.
Plastic Base—These mounts are economical yet resistant to grease, oil, and chemicals that pool on the floor. Often used on small, lightweight machines, they have about 25% the capacity of similarly sized metal mounts.
Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.
Without Cushion | With Rubber Cushion | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Swivel Range of Motion | Base Dia. | Cap. per Mount, lb. | Overall Ht. | Each | Cap. per Mount, lb. | Overall Ht. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Nickel-Plated Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 3 1/2" | 7.5° | 4" | 20,000 | 5 3/8" | 0000000 | 000000 | 15,000 | 5 1/2" | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 4 1/4" | 7.5° | 4" | 20,000 | 6 1/8" | 00000000 | 00000 | 15,000 | 6 1/4" | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 6" | 7.5° | 4" | 20,000 | 7 7/8" | 0000000 | 00000 | 15,000 | 8" | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 8" | 7.5° | 4" | 20,000 | 9 7/8" | 0000000 | 00000 | 15,000 | 10" | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Zinc-Yellow-Chromate-Plated Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 3 1/2" | 7.5° | 4" | 20,000 | 5 3/8" | 0000000 | 00000 | 15,000 | 5 1/2" | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 6" | 7.5° | 4" | 20,000 | 7 7/8" | 0000000 | 00000 | 15,000 | 8" | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 8" | 7.5° | 4" | 20,000 | 9 7/8" | 0000000 | 00000 | 15,000 | 10" | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Black-Oxide Steel Base and Zinc-Plated Steel Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 3 1/2" | 7.5° | 4" | 20,000 | 5 3/8" | 00000000 | 00000 | 15,000 | 5 1/2" | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 6" | 7.5° | 4" | 20,000 | 7 7/8" | 00000000 | 00000 | 15,000 | 8" | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 8" | 7.5° | 4" | 20,000 | 9 7/8" | 00000000 | 00000 | 15,000 | 10" | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
303 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 3 1/2" | 7.5° | 4" | 20,000 | 5 3/8" | 0000000 | 00000 | 15,000 | 5 1/2" | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 4 1/4" | 7.5° | 4" | — | — | ——— | 0 | 15,000 | 6 1/4" | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 4 1/2" | 7.5° | 4" | 20,000 | 6 1/8" | 00000000 | 00000 | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 6" | 7.5° | 4" | 20,000 | 7 7/8" | 0000000 | 00000 | 15,000 | 8" | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 8" | 7.5° | 4" | 20,000 | 9 7/8" | 0000000 | 00000 | 15,000 | 10" | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
316 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 3 1/2" | 7.5° | 4" | 20,000 | 5 3/8" | 00000000 | 000000 | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 6" | 7.5° | 4" | 20,000 | 7 7/8" | 00000000 | 000000 | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 8" | 7.5° | 4" | 20,000 | 9 7/8" | 00000000 | 000000 | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Plastic Base and Zinc-Plated Steel Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 3 1/2" | 7.5° | 4" | 2,400 | 5 3/8" | 0000000 | 00000 | 2,400 | 5 1/2" | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 6" | 7.5° | 4" | 2,400 | 7 7/8" | 00000000 | 00000 | 2,400 | 8" | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 8" | 7.5° | 4" | 2,400 | 9 7/8" | 00000000 | 00000 | 2,400 | 10" | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stay-Put Swivel Leveling Mounts with Threaded Stud
Bolt down machines so they don’t creep across the floor or tip over. These mounts have one or more punch-out holes for securing equipment that you don’t need to move. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
Two Mounting Holes
 |
Glass-Filled Nylon Base and Zinc-Plated Steel Stud—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.
Glass-Filled Nylon Base and 303 Stainless Steel Stud—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals.
Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
Mounting Holes | Without Cushion | With Rubber Cushion | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Swivel Range of Motion | Base Dia. | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. Lg. | Cap. per Mount, lb. | Overall Ht. | Each | Cap. per Mount, lb. | Overall Ht. | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Glass-Filled Nylon Base and Zinc-Plated Steel Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 6" | 7.5° | 5" | No | 1/2" | 3 7/8" | 10,000 | 8 1/4" | 0000000 | 000000 | 10,000 | 8 9/16" | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 8" | 7.5° | 4 3/8" | No | 13/32" | 2 31/32" | — | — | ——— | 0 | 2,700 | 9 11/16" | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Glass-Filled Nylon Base and 303 Stainless Steel Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 6" | 7.5° | 5" | No | 1/2" | 3 7/8" | 10,000 | 8 1/4" | 0000000 | 00000 | 10,000 | 8 9/16" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
One Offset Mounting Hole
 |
The mounting hole extends out from underneath your machine to give you more room to drill and install fasteners.
Glass-Filled Nylon Base and Zinc-Plated Steel Stud—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.
Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
Vibration-Damping Swivel Leveling Mounts with Threaded Stud
 |
A rubber cushion reduces vibration to protect components and extend your machine’s life. These mounts have a ball-and-socket joint in the base that swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.
Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.
Sanitary Vibration-Damping Swivel Leveling Mounts with Threaded Stud
 |
 |
With an extremely smooth finish, rounded edges, and a covered stud, these mounts are free of crevices where bacteria can grow. They have a silicone seal at the base of the thread cover that keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. They also have a rubber cushion that reduces vibration to extend your machine’s life. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.
With Rubber Cushion | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Mounting Ht. | Deflection @ Cap. | Swivel Range of Motion | Base Dia. | Food Industry Std. | Cap. per Mount, lb. | Overall Ht. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
304 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 3 3/8" | 4 3/8" to 5 3/4" | Not Rated | 10° | 4 15/16" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 7,100 | 7 1/4" | 0000000 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stay-Put Sanitary Vibration-Damping Swivel Leveling Mounts with Threaded Stud
Free of crevices where bacteria can grow, these mounts have an extremely smooth finish, rounded edges, and a covered stud. A silicone seal at the base of the thread cover keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. You can also bolt them down so machines don’t creep across the floor or tip over. The rubber cushion on the bottom reduces vibration to extend your machine’s life. In addition, the ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
Two Mounting Holes
 | |
304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
Rubber Cushion—In addition to reducing vibration, the cushion cuts down on noise and protects floors from scrapes and gouges.
Mounting Holes | With Rubber Cushion | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Mounting Ht. | Deflection @ Cap. | Swivel Range of Motion | Base Dia. | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. Lg. | Food Industry Std. | Cap. per Mount, lb. | Overall Ht. | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
304 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 2 7/8" | 4" to 5 3/8" | Not Rated | 9° | 4 1/16" | No | 1/2" | 3 1/8" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 17,400 | 6 7/8" | 0000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 4 1/8" | 5 3/16" to 7 3/4" | Not Rated | 9° | 4 1/16" | No | 1/2" | 3 1/8" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 17,400 | 9 1/4" | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Shock-Absorbing Swivel Leveling Mounts with Threaded Stud
Often used on presses, lathes, and die cutters, these mounts protect machines and floors from damage when equipment suddenly starts and stops. They have a solid rubber base, similar to a hockey puck, that isolates shock. The base also cuts down on noise and grips the floor so equipment doesn't slide when it's vibrating. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
Swivel Leveling Mounts with Threaded Hole
 |
With Cushion |
 |
Without Cushion |
Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.
Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.
Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
Black-Oxide Steel Base—With a matte black appearance, these mounts create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
316 Stainless Steel Base—Our most corrosion-resistant metal mounts, these hold up in just about any environment. They won’t degrade or become pitted, even when exposed to harsh cleaners and chemicals.
Plastic Base—These mounts are economical yet resistant to grease, oil, and chemicals that pool on the floor. Often used on small, lightweight machines, they have about 25% the capacity of similarly sized metal mounts.
Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.
Without Cushion | With Rubber Cushion | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Dp. | Swivel Range of Motion | Base Dia. | Cap. per Mount, lb. | Overall Ht. | Each | Cap. per Mount, lb. | Overall Ht. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Nickel-Plated Steel Base | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 13/16" | 7.5° | 4" | 20,000 | 1 7/8" | 0000000 | 000000 | 15,000 | 2" | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Zinc-Yellow-Chromate-Plated Steel Base | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 13/16" | 7.5° | 4" | 20,000 | 1 7/8" | 0000000 | 00000 | 15,000 | 2" | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Black-Oxide Steel Base | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 13/16" | 7.5° | 4" | 20,000 | 1 7/8" | 00000000 | 00000 | 15,000 | 2" | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
303 Stainless Steel Base | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 13/16" | 7.5° | 4" | 20,000 | 1 7/8" | 0000000 | 00000 | 15,000 | 2" | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
316 Stainless Steel Base | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 13/16" | 7.5° | 4" | 20,000 | 1 7/8" | 00000000 | 000000 | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Plastic Base | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 13/16" | 7.5° | 4" | 2,400 | 1 7/8" | 0000000 | 00000 | 2,400 | 2" | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stay-Put Swivel Leveling Mounts with Threaded Hole
Bolt down machines so they don’t creep across the floor or tip over. These mounts have punch-out holes for securing equipment that you don’t need to move. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.
Two Mounting Holes
 |
Glass-Filled Nylon Base and Zinc-Plated Steel Hex Nut—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.
Glass-Filled Nylon Base and 303 Stainless Steel Hex Nut—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals.
Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
Mounting Holes | Without Cushion | With Rubber Cushion | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Dp. | Cap. per Mount, lb. | Swivel Range of Motion | Base Dia. | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. Lg. | Overall Ht. | Each | Overall Ht. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Glass-Filled Nylon Base and Zinc-Plated Steel Hex Nut | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 13/16" | 7,500 | 7.5° | 4" | No | 7/16" | 2 11/16" | 2 3/8" | 000000000 | 000000 | 2 7/16" | 000000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 13/16" | 10,000 | 7.5° | 5" | No | 1/2" | 3 7/8" | 3" | 00000000 | 00000 | 3 5/16" | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Glass-Filled Nylon Base and 303 Stainless Steel Hex Nut | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 13/16" | 7,500 | 7.5° | 4" | No | 7/16" | 2 11/16" | 2 3/8" | 000000000 | 00000 | 2 7/16" | 000000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 13/16" | 10,000 | 7.5° | 5" | No | 1/2" | 3 7/8" | 3" | 00000000 | 00000 | 3 5/16" | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Vibration-Damping Swivel Leveling Mounts with Threaded Hole
 |
A rubber cushion reduces vibration to protect components and extend your machine’s life. These mounts have a ball-and-socket joint in the base that swivels to compensate for slightly sloped and pitted floors. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.
Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.
Reinforced Threaded-Hole Bumpers
 |
Style 1 |
With a metal core or base plate for added strength, these bumpers withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers, vibration dampers, and noise reducers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.
Style 1
|
 |
Multipurpose Neoprene—A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.
Abrasion-Resistant Polyurethane Rubber—Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
Oil-Resistant Buna-N—These bumpers resist oil and fuels better than other rubber bumpers. Use them on frequently lubricated machinery and oily equipment, such as engines and pumps.
Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
Thread | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Dp. | OD | Ht. | Hardness | Hardness Rating | Color | Temp., ° F | Core Material | Nonmarking | For Use Outdoors | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Multipurpose Neoprene | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 1" | 2 1/4" | 2 1/4" | Durometer 40A | Medium Soft | Black | -40 to 200 | Steel | No | Yes | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 1" | 2 1/4" | 2 1/4" | Durometer 75A | Hard | Black | -40 to 200 | Steel | No | Yes | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 1 1/4" | 3" | 2 3/4" | Durometer 40A | Medium Soft | Black | -40 to 200 | Steel | No | Yes | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 1 1/4" | 3" | 2 3/4" | Durometer 75A | Hard | Black | -40 to 200 | Steel | No | Yes | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Abrasion-Resistant Polyurethane Rubber | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 1" | 2 1/4" | 2 1/4" | Durometer 50A | Medium | Red | -40 to 200 | Steel | No | Yes | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 1" | 2 1/4" | 2 1/4" | Durometer 60A | Medium Hard | Black | -40 to 200 | Steel | No | Yes | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 1" | 2 1/4" | 2 1/4" | Durometer 85A | Hard | Red | -40 to 200 | Steel | No | Yes | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 1" | 2 1/4" | 2 1/4" | Durometer 95A | Extra Hard | Black | -40 to 200 | Steel | No | Yes | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 1 1/4" | 3" | 2 3/4" | Durometer 60A | Medium Hard | Red | -40 to 200 | Steel | No | Yes | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 1 1/4" | 3" | 2 3/4" | Durometer 85A | Hard | Red | -40 to 200 | Steel | No | Yes | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 1 1/4" | 3" | 2 3/4" | Durometer 90A | Extra Hard | Red | -40 to 200 | Steel | No | Yes | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Oil-Resistant Buna-N | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 1" | 2 1/4" | 2 1/4" | Durometer 40A | Medium Soft | White | -60 to 175 | Steel | Yes | No | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
