NTEP approved, these scales weigh material sold by weight.

Scales with batteries included run wirelessly on the rechargeable battery, or you can plug them in with the included AC adapter. They’re durable enough to withstand overload up to 10 times their rated capacity.

Scales with a tare function let you reset the scale to zero after placing an item on the platform. Plug them in with the included AC adapter. They’re compatible with dimensional scales to measure both the dimensions and weight of an item.

Ten times more accurate than standard bench-top scales, these scales are extremely precise. They’re NTEP approved for measuring materials sold by weight. Use the scale’s counting mode to keep a tally of your measurements as you add or remove items to the scale. Operate the scale wirelessly—they run on a rechargeable battery. Or use the included adapter to plug them into an outlet and run them constantly. To print or transfer your data to a computer, connect an RS-232 computer cord (not included).

NTEP approved for use with materials sold by weight, these scales count parts in addition to weighing material. The counting function can be turned off for use as a weigh-only scale. Scales have a 9-pin RS-232 serial port to connect to your PC with a data cord (sold separately). The tare function lets you reset the scale to zero after placing a container on the platform.

Stainless steel platforms are more corrosion resistant than steel.

Optional data logging software (sold separately) is Windows compatible and allows you to upload data.

Keep a safe distance when weighing large loads—these scales have a remote display that can be mounted up to 20 feet from the platform. They are NTEP approved for use with products sold by weight. The tare function lets you reset the scale to zero after placing a container on the platform.

Side rails keep loads in place on the platform.

Adjustable mounting feet compensate for uneven floor surfaces.

Count and weigh loads that are difficult to lift. The weighing function is NTEP approved for use with products sold by weight. Scales have a tare function that lets you reset the scale to zero after placing a container on the platform. Scales operate on the included AC adapter or batteries (not included).

These scales are NTEP approved as legal for trade and have an IP69K rated load cell for use in washdown environments. They withstand exposure to dust and moisture, including the frequent high-pressure, high-temperature washdowns commonly used in outdoor industrial environments, food processing facilities, and chemical plants. Plus, the scale-to-display junction box meets NEMA 4X standards for protection against washdowns and corrosion.

Also known as platform scales, these have a low profile so you only need to lift heavy objects 3" off the ground. Their stainless steel construction and a ribbed structural underside give them the necessary support to weigh thousands of pounds at a time. To keep items in place, a diamond tread on the platform provides slip resistance. The load cells in these scales are FM approved, so they’ve been tested for quality and safety by Factory Mutual.

Subtract the weight of a container with the tare function to weigh only the material inside. Use the counting mode to keep a running tally of how many items are on the scale.

Mount the remote display at a distance on a workstation, column, or wall—the connecting cable is 22 feet long. The backlit display features 1"-tall digits for easy reading.

Install optional ramps to slide or wheel heavy loads onto scales. If you install two ramps, they must be on opposite ends.

Roll this scale wherever you need to weigh. It is NTEP approved for use with products sold by weight. It has a 9-pin RS-232 serial port to connect to your PC with a data cord (sold separately). The tare function lets you reset the scale to zero after placing a container on the platform. Scale operates on the included AC adapter or batteries (not included).

Optional data logging software (sold separately) is Windows compatible and allows you to upload data.

Weigh boxes as they flow through your conveyor line to reduce bending and lifting. These scales integrate seamlessly into your line thanks to their conveyor rollers or ball transfers, which move boxes along after weighing. A check-weighing mode flags boxes that are outside a specified weight range. And a weight accumulation mode keeps a running weight of all boxes measured. These scales are National Type Evaluation Program (NTEP) approved for use with legal-for-trade materials sold by weight.

Mount the display in front of the scale, on a nearby wall, or use the included stand to mount it above the scale. 1" digits are easy to read from a distance. These scales are rated IP65 for protection from dust and low-pressure washdowns. They plug into a standard outlet or run on the rechargeable battery for up to 72 hours. Transmit data to your PC by connecting the scale with an RS-232 computer cord (not included).

Roller conveyor scales are for straight-path flows.

Ball transfer conveyor scales receive and divert boxes in multiple directions.

For temporary jobs, set your scale on a cart (sold separately), then roll it up to your conveyor or workbench. Two of the casters are lockable, so the cart stays in place during longer jobs or when used in a conveyor line.

NTEP certified, these hanging scales are for use with materials sold by weight. The tare function lets you reset the scale to zero after hanging a container on the hook. They run on batteries (not included), so you don't need to connect to a separate power source.

Aluminum scales are more durable than plastic scales.

Scales with a RS-232 connection can be connected to a computer, so you can transfer and print data. Plug a cord (not included) into the scale’s DB9 port to connect to your computer.

For technical drawings and 3-D models, click on a part number.

Often used to weigh materials sold by weight in harsh conditions, these NTEP-approved scales have an aluminum enclosure that meets IP65 and NEMA 4 for protection from dirt and washdowns. They come with a certificate of calibration traceable to NIST that states they've passed a test for accuracy. The tare function lets you reset the scale to zero after hanging a container on the hook. Scales operate on the included AC adapter or the included rechargeable battery.