Machine these jaws to fit the curves and edges of your unique workpiece for a tighter hold and more stability than standard hardened jaws.

Secure jaws to a CNC lathe chuck with industry standard 1.5 mm × 60° serrations or wider 3 mm × 60° serrations.

When a job calls for a 5C collet, save time by using an adapter instead of removing your lathe chuck.

Insert these one-piece grooved liners between vise jaws to hold small-diameter material vertically.

Choose from flat and grooved liners.

Attach these workstops to the side or top of your vise to keep parts in position for machining.

Mount these workstops into slotted vise jaws—they hold workpieces in place and prevent horizontal movement during machining.

The vise body and stationary jaw are one piece for high repeatability, even under heavy clamping loads. Ground flat on the base and three sides, these vises ensure accuracy whether mounted on the base, either side, or upright.

Significantly cut down on jaw changeover time—this two-part system lets you swap out jaws in less than 30 seconds. Mount the jaw plates to the vise and slide the dovetailed jaw stock in and out of the plates.

Designed to hold your part on 4- and 5-axis milling machines, these vises provide rigid clamping while exposing five full sides of the workpiece. This allows even complex parts to be completed in a single operation. You must cut a dovetail into your material before the vise can grip it.

Tilt and lock the vise to hold work at any angle up to 90°.

Compressed air controlled by a foot pedal allows hands‐free operation. Use these vises in production applications with frequent insertion and removal of workpieces.

Reliably hold workpieces with these basic machine vises.

Use the adjustment dials to ensure your work is accurately positioned on X and Y axes.

Turn the handle to move the jaw on these basic vises.