Achieve temperatures as high as 1200° C for heat-treating metal.

76 and 128-cu. in. capacity furnaces have an LED that shows actual or set-point temperature in ° C; an indicator light flashes when set temperature is reached. The safety switch shuts off the furnace when the door is opened.

For technical drawings and 3-D models, click on a part number.

Program time, temperature, and rate of temperature change. These furnaces reach temperatures as high as 2192° F for heat-treating metal. These furnaces have six programmable parameters: 1) delay start, 2) rate of temperature change, 3) target temperature, 4) temperature timer, 5) memory retrieval, and 6) °C/°F digital display. Link two three-stage programs to create a six-stage operation. A maximum of 10 programs can be stored with up to a seven-day delay. An LCD shows internal temperature, countdown time, and program number.

For technical drawings and 3-D models, click on a part number.

Safely cure light-activated adhesives, coatings, and ink or strengthen 3D-printed resin parts with UV light in these enclosed chambers. Also known as flood curing, they evenly cure your parts. They work just like a microwave. Plug them in, set your time, and they’re ready to cure.

Chambers with a turntable are ideal for large and intricate 3D printed parts. The turntable rotates parts under the lights for even exposure while curing. Because these chambers use low-intensity LED bulbs and only operate when the door is closed, additional UV-protective glasses or clothing while using them are not required.

Chambers with a shelf create a deep, consistent cure and work best with small and flat parts. You can position parts closer to the bulb with the adjustable shelf for a faster curing. An automatic lamp shutter covers and reduces power to the bulb when you open the door. You should always wear UV-protective glasses and clothing when the system is turned on because of their high-intensity light. To remotely monitor and control these chambers, connect them to a computer or PLC.

Chambers and replacement bulbs that cannot be sold to Canada are restricted by regulations on limiting mercury content.

For technical drawings and 3-D models, click on a part number.

Disinfect phones, door knobs, masks, and other small objects. Using ultraviolet germicidal irradiation (UVGI), these portable lamps kill viruses, bacteria, and other microbes in seconds. Lightweight with a durable plastic housing, they’re designed to be carried from place to place. To guard from UV rays, wear eye protection and cover exposed skin while disinfecting.

These lamps cannot be sold to Canada due to import regulations.

For technical drawings and 3-D models, click on a part number.

These chambers kill viruses, bacteria, and other microbes with ultraviolet germicidal irradiation (UVGI). Use them to disinfect small items, especially those that could be damaged by liquid chemical cleaners. They’re enclosed to protect users, with a UV-blocking window and an auto shut-off function if the door is opened while they’re running. Similar to microwaves, these chambers let you adjust energy and time settings based on what you’re putting inside. Program up to 10 presets to save time when disinfecting with frequently used settings. A built-in radiometer monitors UV levels, making sure the correct level of UVGI energy is delivered even as the bulbs age. Bulbs should be replaced after 5,000 hours of use.

These chambers cannot be sold to Canada due to import regulations.

For technical drawings and 3-D models, click on a part number.