Labels allow identification at a glance.

These bottles are fluorinated to prevent contents from being absorbed.

These bottles are made with an additive that prevents electrostatic discharge from building up on the surface.

These bottles are made with an additive that prevents electrostatic discharge from building up on the surface.

Identify contents at a glance with these sets of 25 bottles in five lid colors.

Add a needle with a luer lock connection and squeeze to dispense a single drop or a stream of liquid.

Release a fine mist spray similar to an aerosol without propellants or pressure.

Spray liquids around your food processing plant while reducing the risk of contaminating the food. These spray bottles have metal additives in the spray head and on the label that can be picked up by a metal detector if the bottles—or any piece of the spray head or label—fall into your line.

Spray at any angle—even upside down.

Access tight spaces with the 36" long tube that extends from these spray bottles.

An additive prevents electrostatic discharge from building up on the surface of these dispensers.

Dispense flammable liquids with these FM-approved push-top dispensers.

These bottles have a squeeze-bulb dropper attached to the lid.

Choose a telescoping handle and a snap-on bottle or beaker to collect samples from large tanks and vats.

Sterilized so they won’t contaminate your samples or lines, these liquid samplers are often used in food processing, pharmaceutical, and biotech applications.

Pump the handle to draw liquid out of a tank or drum through a hose into sample bottles. Only the hose and hose weight come into contact with the liquid, reducing the possibility of cross contamination.

These samplers are cleaned and bagged in a Class 7 clean room. Each bag is marked with a lot number. Use these samplers to extract thick liquids, such as oil, with a maximum viscosity of 100 cP.

These bottles are fluorinated to resist absorption of contents.

Cover the vent hole with your finger to control the pouring speed.

Thread a wire tamper-seal tag through the holes in the lid and bottle. If the tag is cut or broken, you'll know the bottle has been opened.

A coating on these bottles make them slip, impact, and shatter resistant.

Store a large quantity of liquid in these bottles and use the built-in faucet to dispense.

Each jar comes individually bagged and sterilized.

Color-code your storage containers to quickly identify small parts.

Even when turned upside down, these containers keep fluids inside. They include an applicator brush and a plug to seal the container.

Silicone rubber seals keep air and moisture out of these glass jars.

These vials are sized to store samples and other small quantities.

Vials have a textured wand attached to the lid.

Store, pour, and carry up to 1 gallon.

Flatten these carboys for convenient storage.

Scoop, measure, and pour without fear of contaminating your food line. A metal additive in the plastic can be picked up by a metal detector, and a chemical additive will show up on X-ray, so you can find them if they fall into your line.

These beakers stand up to the most aggressive chemicals as well as temperatures up to 500° F.

Tip cans down for controlled dispensing, then swing them back to their upright position.

Also known as Type II safety cans, these have two openings—one for filling, one for pouring.

Easily fill these cans through the detachable wide-mouth funnel, then remove the threaded plug to empty. A flame arrester protects against outside ignition.

Fill more quickly with a wide mouth than a narrow mouth.

Made of plastic, these bottles won’t break as easily as glass bottles if handled roughly. They come with multiple layers of packaging to guard against leaks when shipping hazardous liquids.