With the male threaded end on these inserts, mount components directly to plastic parts.

The tapered shape makes it easier to guide these inserts into a hole during installation. Use a drill bit to create a straight hole, then taper the top half.

Tapered on one end, these inserts are easy to guide into a hole during installation. The threaded rod on the other end creates an attachment point for components on plastic parts.

These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.

Made from brass, these inserts are nonmagnetic, corrosion resistant, and electrically conductive.

These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.

Fins cut into the surrounding material for a more secure hold than knurled inserts. Made from brass, they’re nonmagnetic, corrosion resistant, and electrically conductive.

Integrate strong metal threads as you make parts through injection molding. These inserts become inseparable from your parts, forming a stronger bond in plastic than heat-set inserts and press-fit inserts.

Add permanent threads to sheet metal, like weld nuts, but without the setup and mess. A zinc plating on these steel press-fit nuts helps prevent rust in wet environments.

Create permanent, corrosion-resistant threads in sheet metal without the setup and mess of weld nuts.

Made from 18-8 stainless steel, these metric nuts withstand contact with water and chemicals better than zinc-plated steel nuts.

Add lightweight, corrosion-resistant threads to sheet metal.

Align off-center parts as you fasten them together—these steel press-fit nuts have floating threads, so you can install bolts at a slight angle.

A nylon insert in these press-fit locknuts grips threads to prevent screws from loosening while knurls on the bottom hold these locknuts firmly in place.

To protect against leaks and debris, these press-fit nuts have enclosed threads. Their 18-8 stainless steel construction resists corrosion from mild chemicals and water better than zinc-plated steel nuts.

Create corrosion-resistant threads in soft metal and plastic panels—these stainless steel press-fit nuts withstand exposure to water and chemicals.

These tools include everything you need to install press-fit nuts by hand.

The closed end on these nuts keeps debris from passing through the nut or damaging the threads.

Originally designed for Formula 1 racecars, these titanium rivet nuts are the best choice when you need a high strength-to-weight ratio—they're 40% lighter than steel nuts.

Made of steel, these rivet nuts add strong, reusable threads to sheet metal and other material that’s too thin to tap. The ribbed body on these nuts grips material better than smooth-body rivet nuts, so they won't twist when you tighten a screw.

A ribbed body on these rivet nuts and wedges under the flange bite into soft materials such as brass, aluminum, and composites to prevent spinning when you tighten a screw.

Threads float inside the nut so you can install a screw at a slight angle to align with off-center parts. They’re also known as Riv-Float nuts.