Stud-Driven Hole Punch Sets with Straight Hydraulic Driver
The driver supplies eight tons of force to the hole punches in this set to make straight punches. Turn the included stud into the punch to draw it through sheets of metal, plastic, and fiberglass and create a hole. Drill pilot holes slightly larger than the size of the stud. These are also known as knockout and chassis punches.
| Includes | For Pipe Size  | For Conduit Trade Size | For Max. Steel Thick. | Punching Force, lbs. | Container Type | Each | |
For Use On Aluminum, Brass, Copper, Fiberglass, Plastic, Stainless Steel, Steel | |||||||
|---|---|---|---|---|---|---|---|
| 6 Punches, 6 Dies, 2 Studs, Hydraulic Driver, Hydraulic Oil | 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | 1/8" | 16,000 | Plastic Case | 00000000 | 000000000 |
Stud-Driven Hole Punch Sets with Right-Angle Hydraulic Driver
Rotate the angled head of the driver up to 180° to fit it into tight spaces and supply eight tons of force to the hole punches. Turn the included stud into the punch to draw it through sheets of metal, plastic, and fiberglass and create a hole. Drill pilot holes slightly larger than the size of the stud. These are also known as knockout and chassis punches.
| Includes | For Pipe Size | For Conduit Trade Size | For Max. Steel Thick. | Punching Force, lbs. | Head Rotation | Container Type | Each | |
For Use On Aluminum, Brass, Copper, Fiberglass, Plastic, Stainless Steel, Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 6 Punches, 6 Dies, 2 Studs, Hydraulic Driver, Hydraulic Oil | 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | 1/8" | 16,000 | 180° | Plastic Case | 00000000 | 000000000 |
Stud-Driven Hole Punch Sets with High-Powered Straight Hydraulic Driver
Create larger holes and make repeated punches with these drivers that supply 11 tons of force to the included hole punches. Turn the included stud into the punch to draw it through sheets of metal, plastic, and fiberglass and create a hole. Drill pilot holes slightly larger than the size of the stud. These are also known as knockout and chassis punches.
| Includes | For Pipe Size | For Conduit Trade Size | For Max. Steel Thick. | Punching Force, lbs. | Container Type | Each | |
For Use On Aluminum, Brass, Copper, Fiberglass, Plastic, Stainless Steel, Steel | |||||||
|---|---|---|---|---|---|---|---|
| 6 Punches, 6 Dies, 2 Studs, 3-ft. Hose, Hydraulic Driver, Hydraulic Oil | 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | 1/8" | 22,000 | Plastic Case | 00000000 | 000000000 |
| 10 Punches, 10 Dies, 3 Studs, 3-ft. Hose, Hydraulic Driver, Hydraulic Oil | 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 3 1/2, 4 | 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 3 1/2, 4 | 1/8" | 22,000 | Plastic Case | 00000000 | 00000000 |
Stud-Driven Hole Punch Sets for Pipe and Conduit
Create holes in metal, plastic, and fiberglass by using a ratchet wrench or hydraulic driver to draw the punch onto the included stud. Drill pilot holes slightly larger than the size of the stud. These are also known as knockout and chassis punches.
| Includes | For Pipe Size | For Conduit Trade Size | For Max. Steel Thick. | Material | Container Type | Each | |
For Use On Aluminum, Brass, Copper, Fiberglass, Plastic, Stainless Steel, Steel | |||||||
|---|---|---|---|---|---|---|---|
| 2 Punches, 2 Dies, Stud | 1 1/2, 2 | 1 1/2, 2 | 1/8" | Steel | Plastic Case | 000000000 | 0000000 |
| 4 Punches, 4 Dies, 2 Studs | 1/2, 3/4, 1, 1 1/4 | 1/2, 3/4, 1, 1 1/4 | 1/8" | Steel | Plastic Case | 000000000 | 000000 |
| 6 Punches, 6 Dies, 2 Studs, Ratchet Wrench | 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | 1/8" | Steel | Plastic Case | 000000000 | 000000 |
European Standard Stud-Driven Hole Punch Sets for Conduit
Create holes in metal, plastic, and fiberglass by using a ratchet wrench or hydraulic driver to draw the punch onto the included stud. Drill pilot holes slightly larger than the size of the stud. These are also known as knockout and chassis punches. The included step drill bit has cutting steps with progressively larger diameters for drilling a range of hole sizes up to 3/8” in diameter in thin materials.
| Includes | For Conduit Thread Size | For Max. Steel Thick. | Material | Container Type | Each | |
For Use On Aluminum, Brass, Copper, Fiberglass, Plastic, Steel | ||||||
|---|---|---|---|---|---|---|
| 6 Punches, 6 Dies, Stud, 3/8" Step Drill Bit, Ratchet Wrench | PG-9, PG-11, PG-13.5, PG-16, PG-21, M30.5 | 1/16" | Steel | Plastic Case | 000000000 | 0000000 |
Metric Stud-Driven Hole Punch Sets for Conduit
Create holes in metal, plastic, and fiberglass by using a ratchet wrench or hydraulic driver to draw the punch onto the included stud. Drill pilot holes slightly larger than the size of the stud. These are also known as knockout and chassis punches. The included step drill bit has cutting steps with progressively larger diameters for drilling a range of hole sizes up to 3/8" in diameter in thin materials.
| Includes | For Max. Steel Thick. | Material | Container Type | Each | |
For Use On Aluminum, Brass, Copper, Fiberglass, Plastic, Steel | |||||
|---|---|---|---|---|---|
| 5 Punches, 5 Dies, 2 Studs, 3/8" Step Drill Bit, Ratchet Wrench | 1/16" | Steel | Plastic Case | 000000000 | 0000000 |
Self-Centering Stud-Driven Hole Punch Sets with Hydraulic Driver
Make accurate holes every time. Drill a pilot hole into your workpiece—the center of these punches fits inside the pilot hole to keep cuts aligned. Pilot holes should be slightly larger than the size of the stud. The die’s design splits the punched out plug in two for easy removal. The included driver supplies 11 tons of force to punch conduit up to size 2. These punches are also known as knockout and chassis punches.
| Includes | For Pipe Size | For Conduit Trade Size | For Max. Steel Thick. | Punching Force, lbs. | Material | Container Type | Each | |
For Use On Aluminum, Brass, Copper, Stainless Steel, Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 6 Punches, 6 Dies, 2 Studs, Hydraulic Driver, Hydraulic Hand Pump, 3-ft. Hydraulic Hose, Couplings | 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | 1/8" | 22,000 | Steel | Metal Case | 0000000 | 000000000 |
| Punching Force | Includes | Each | |
| 22,000 lbs. | 2 Studs, 3-ft. Hose, Hydraulic Oil | 000000 | 000000000 |
| Punching Force | Head Rotation | Includes | Each | |
| 16,000 lbs. | 180° | 2 Studs, Hydraulic Oil | 0000000 | 0000000 |
| Punching Force | Includes | Each | |
| 16,000 lbs. | 2 Studs, Hydraulic Oil | 0000000 | 0000000 |
Self-Centering Stud-Driven Hole Punch Sets
Make accurate holes every time. Drill a pilot hole into your workpiece—the center of these punches fits inside the pilot hole to keep cuts aligned. Pilot holes should be slightly larger than the size of the stud. The die’s design splits the punched out plug in two for easy removal. Use these punches with any 8- or 11-ton hydraulic driver. They are also known as knockout and chassis punches.
| Includes | For Pipe Size | For Conduit Trade Size | For Max. Steel Thick. | Material | Container Type | Each | |
For Use On Aluminum, Brass, Copper, Stainless Steel, Steel | |||||||
|---|---|---|---|---|---|---|---|
| 4 Punches, 4 Dies, 2 Studs | 1/2, 3/4, 1, 1 1/4 | 1/2, 3/4, 1, 1 1/4 | 1/8" | Steel | Metal Case | 0000000 | 0000000 |
Hammer-Driven Hole Punch Sets
The handle and punch are one complete tool.
For technical drawings and 3-D models, click on a part number.
| Includes | For Hole Dia. | Material | Container Type | Each | |
For Use On Brass, Copper, Fabric, Leather, Rubber | |||||
|---|---|---|---|---|---|
| 5 Punches, 5"-Lg. Awl, 7"-Lg. Snips with a 1 3/4" Cut Length | 1/4", 3/8", 1/2", 5/8", 3/4" | Steel | Nylon Pouch | 0000000 | 0000000 |
| 5 Punches | 1 1/16", 1 1/4", 1 3/8", 1 5/8", 1 3/4" | Steel | Nylon Pouch | 0000000 | 000000 |
| 7 Punches | 3/16", 5/16", 7/16", 9/16", 11/16", 13/16", 15/16" | Steel | Nylon Pouch | 0000000 | 000000 |
| 7 Punches | 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1" | Steel | Nylon Pouch | 0000000 | 000000 |