Threaded-Hole Offset Pull Handles
Thread screws through holes from the back of your surface into the handles to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. The grip is offset from the mounting surface so there's room to fully grasp the handle.
Round grips allow your hand to pivot in any direction.
Oval grips conform to your hand and offer more control than round grips.
Zinc-plated steel handles have mild rust resistance. Chrome-plated steel handles have more corrosion resistance than plain or zinc-plated steel handles.
Aluminum handles have mild corrosion resistance, are lightweight, and are nonmagnetic.
Brass handles have good corrosion resistance and are nonmagnetic.
Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
Zinc handles have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Grip | Thread | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mount. Hole Ctr.-to-Ctr. Wd. | Dia. | Ht. | Thick. | Projection | Pull Cap., lbs. | Size | Dp. | No. of Mount. Holes | Mount. Fasteners Included | Each | |
30° Offset Angle—Round Grip | |||||||||||
Steel—Dull | |||||||||||
2" | 1/4" | __ | __ | 1" | Not Rated | 6-32 | 3/8" | 2 | No | 00000000 | 00000 |
2 1/2" | 5/16" | __ | __ | 1 5/16" | Not Rated | 8-32 | 7/16" | 2 | No | 00000000 | 0000 |
3" | 1/4" | __ | __ | 1" | Not Rated | 6-32 | 3/8" | 2 | No | 00000000 | 0000 |
4" | 5/16" | __ | __ | 1 1/2" | Not Rated | 10-32 | 9/16" | 2 | No | 00000000 | 0000 |
4 1/2" | 5/16" | __ | __ | 1 1/2" | Not Rated | 10-32 | 9/16" | 2 | No | 00000000 | 0000 |
5" | 5/16" | __ | __ | 1 1/2" | Not Rated | 10-32 | 9/16" | 2 | No | 00000000 | 0000 |
5 1/2" | 5/16" | __ | __ | 1 1/2" | Not Rated | 10-32 | 9/16" | 2 | No | 00000000 | 0000 |
6" | 5/16" | __ | __ | 1 1/2" | Not Rated | 10-32 | 9/16" | 2 | No | 00000000 | 00000 |
Zinc-Plated Steel—Dull | |||||||||||
2 1/2" | 5/16" | __ | __ | 1 5/16" | Not Rated | 8-32 | 7/16" | 2 | No | 00000000 | 0000 |
4" | 5/16" | __ | __ | 1 1/2" | Not Rated | 10-32 | 9/16" | 2 | No | 00000000 | 0000 |
6" | 5/16" | __ | __ | 1 1/2" | Not Rated | 10-32 | 9/16" | 2 | No | 00000000 | 00000 |
Aluminum—Dull | |||||||||||
2" | 5/16" | __ | __ | 1 5/16" | Not Rated | 8-32 | 7/16" | 2 | No | 00000000 | 0000 |
2 1/2" | 5/16" | __ | __ | 1 5/16" | Not Rated | 8-32 | 7/16" | 2 | No | 00000000 | 0000 |
3" | 5/16" | __ | __ | 1 1/2" | Not Rated | 8-32 | 5/16" | 2 | Yes | 000000 | 0000 |
4" | 5/16" | __ | __ | 1 1/2" | Not Rated | 8-32 | 5/16" | 2 | Yes | 000000 | 0000 |
4 1/2" | 5/16" | __ | __ | 1 1/2" | Not Rated | 8-32 | 7/16" | 2 | No | 00000000 | 0000 |
5" | 5/16" | __ | __ | 1 1/2" | Not Rated | 8-32 | 7/16" | 2 | No | 00000000 | 0000 |
5 1/2" | 5/16" | __ | __ | 1 1/2" | Not Rated | 8-32 | 7/16" | 2 | No | 00000000 | 0000 |
6" | 5/16" | __ | __ | 1 1/2" | Not Rated | 8-32 | 5/16" | 2 | Yes | 000000 | 0000 |
Brass—Polished | |||||||||||
2 1/2" | 5/16" | __ | __ | 1 5/16" | Not Rated | 8-32 | 7/16" | 2 | No | 00000000 | 00000 |
4" | 1/4" | __ | __ | 1" | Not Rated | 6-32 | 3/8" | 2 | No | 00000000 | 00000 |
5" | 1/4" | __ | __ | 1" | Not Rated | 6-32 | 3/8" | 2 | No | 00000000 | 00000 |
6" | 1/4" | __ | __ | 1" | Not Rated | 6-32 | 3/8" | 2 | No | 00000000 | 00000 |
303 Stainless Steel—Polished | |||||||||||
2" | 1/4" | __ | __ | 1" | Not Rated | 6-32 | 3/8" | 2 | No | 00000000 | 0000 |
3" | 1/4" | __ | __ | 1" | Not Rated | 6-32 | 3/8" | 2 | Yes | 000000 | 00000 |
4" | 5/16" | __ | __ | 1 1/2" | Not Rated | 10-32 | 9/16" | 2 | Yes | 0000000 | 0000 |
4 1/2" | 5/16" | __ | __ | 1 1/2" | Not Rated | 10-32 | 9/16" | 2 | No | 00000000 | 00000 |
5" | 5/16" | __ | __ | 1 1/2" | Not Rated | 10-32 | 9/16" | 2 | No | 00000000 | 00000 |
5 1/2" | 5/16" | __ | __ | 1 1/2" | Not Rated | 10-32 | 9/16" | 2 | No | 00000000 | 00000 |
6" | 5/16" | __ | __ | 1 1/2" | Not Rated | 10-32 | 9/16" | 2 | Yes | 0000000 | 00000 |
35° Offset Angle—Oval Grip | |||||||||||
Aluminum—Dull | |||||||||||
112mm | __ | 20mm | 13mm | 48mm | 618 | M6 | 10mm | 2 | No | 00000000 | 00000 |
128mm | __ | 26mm | 17mm | 54mm | 397 | M8 | 12mm | 2 | No | 00000000 | 00000 |
160mm | __ | 26mm | 17mm | 54mm | 728 | M8 | 12mm | 2 | No | 00000000 | 00000 |
Black Powder-Coated Aluminum—Dull | |||||||||||
112mm | __ | 20mm | 13mm | 48mm | 618 | M6 | 10mm | 2 | No | 00000000 | 00000 |
128mm | __ | 26mm | 17mm | 54mm | 397 | M8 | 12mm | 2 | No | 00000000 | 00000 |
160mm | __ | 26mm | 17mm | 54mm | 728 | M8 | 12mm | 2 | No | 00000000 | 00000 |
304 Stainless Steel—Polished | |||||||||||
112mm | __ | 13mm | 20mm | 48mm | 1,630 | M6 | __ | 2 | No | 000000 | 00000 |
128mm | __ | 13mm | 20mm | 48mm | 785 | M6 | __ | 2 | No | 000000 | 00000 |
45° Offset Angle—Round Grip | |||||||||||
Aluminum—Dull | |||||||||||
8" | 1" | __ | __ | 3 1/2" | Not Rated | 1/4"-20 | 5/8" | 2 | Yes | 00000000 | 00000 |
10" | 1" | __ | __ | 3 1/2" | Not Rated | 1/4"-20 | 5/8" | 2 | Yes | 00000000 | 00000 |
Anodized Aluminum—Dull | |||||||||||
7" | 13/16" | __ | __ | 2 1/8" | Not Rated | 1/4"-20 | 1/2" | 2 | No | 00000000 | 00000 |
8" | 13/16" | __ | __ | 2 1/8" | Not Rated | 1/4"-20 | 1/2" | 2 | No | 00000000 | 00000 |
10" | 13/16" | __ | __ | 2 1/8" | Not Rated | 1/4"-20 | 1/2" | 2 | No | 00000000 | 00000 |
12" | 13/16" | __ | __ | 2 1/8" | Not Rated | 1/4"-20 | 1/2" | 2 | No | 00000000 | 00000 |
Black Powder-Coated Aluminum—Dull | |||||||||||
7" | 13/16" | __ | __ | 2 1/8" | Not Rated | 1/4"-20 | 1/2" | 2 | No | 00000000 | 00000 |
8" | 13/16" | __ | __ | 2 1/8" | Not Rated | 1/4"-20 | 1/2" | 2 | No | 00000000 | 00000 |
10" | 13/16" | __ | __ | 2 1/8" | Not Rated | 1/4"-20 | 1/2" | 2 | No | 00000000 | 00000 |
12" | 13/16" | __ | __ | 2 1/8" | Not Rated | 1/4"-20 | 1/2" | 2 | No | 00000000 | 00000 |
304 Stainless Steel—Dull | |||||||||||
8" | 1" | __ | __ | 3 1/2" | Not Rated | 1/4"-20 | 5/8" | 2 | Yes | 00000000 | 000000 |
9" | 1" | __ | __ | 3 1/2" | Not Rated | 1/4"-20 | 5/8" | 2 | Yes | 00000000 | 000000 |
12" | 1" | __ | __ | 3 1/2" | Not Rated | 1/4"-20 | 5/8" | 2 | Yes | 00000000 | 000000 |
200mm | 28mm | __ | __ | 66mm | Not Rated | M8 | 15mm | 2 | No | 00000000 | 000000 |
45° Offset Angle—Oval Grip | |||||||||||
Chrome-Plated Zinc—Polished | |||||||||||
5" | __ | 5/8" | 1/4" | 1 5/8" | Not Rated | 1/4"-20 | 7/8" | 2 | No | 000000 | 00000 |
70° Offset Angle—Round Grip | |||||||||||
Chrome-Plated Steel—Dull | |||||||||||
64mm | 8mm | __ | __ | 40mm | Not Rated | M4 | 8mm | 2 | No | 00000000 | 00000 |
88mm | 8mm | __ | __ | 40mm | Not Rated | M4 | 8mm | 2 | No | 00000000 | 00000 |
100mm | 8mm | __ | __ | 40mm | Not Rated | M4 | 8mm | 2 | No | 00000000 | 00000 |
120mm | 10mm | __ | __ | 47mm | Not Rated | M5 | 12mm | 2 | No | 00000000 | 00000 |
160mm | 12mm | __ | __ | 60mm | Not Rated | M6 | 12mm | 2 | No | 00000000 | 00000 |
180mm | 10mm | __ | __ | 47mm | Not Rated | M5 | 12mm | 2 | No | 00000000 | 00000 |
250mm | 12mm | __ | __ | 60mm | Not Rated | M6 | 12mm | 2 | No | 00000000 | 00000 |
Anodized Aluminum—Dull | |||||||||||
64mm | 8mm | __ | __ | 40mm | Not Rated | M4 | 8mm | 2 | No | 00000000 | 00000 |
88mm | 8mm | __ | __ | 40mm | Not Rated | M4 | 8mm | 2 | No | 00000000 | 00000 |
100mm | 8mm | __ | __ | 40mm | Not Rated | M4 | 8mm | 2 | No | 00000000 | 00000 |
120mm | 10mm | __ | __ | 47mm | Not Rated | M5 | 12mm | 2 | No | 00000000 | 00000 |
160mm | 12mm | __ | __ | 60mm | Not Rated | M6 | 12mm | 2 | No | 00000000 | 00000 |
180mm | 10mm | __ | __ | 47mm | Not Rated | M5 | 12mm | 2 | No | 00000000 | 00000 |
250mm | 12mm | __ | __ | 60mm | Not Rated | M6 | 12mm | 2 | No | 00000000 | 00000 |
303 Stainless Steel—Dull | |||||||||||
64mm | 8mm | __ | __ | 40mm | Not Rated | M4 | 8mm | 2 | No | 00000000 | 00000 |
88mm | 8mm | __ | __ | 40mm | Not Rated | M4 | 8mm | 2 | No | 00000000 | 00000 |
100mm | 8mm | __ | __ | 40mm | Not Rated | M4 | 8mm | 2 | No | 00000000 | 00000 |
304 Stainless Steel—Dull | |||||||||||
120mm | 10mm | __ | __ | 47mm | Not Rated | M5 | 12mm | 2 | No | 00000000 | 00000 |
160mm | 12mm | __ | __ | 60mm | Not Rated | M6 | 12mm | 2 | No | 00000000 | 00000 |
180mm | 10mm | __ | __ | 47mm | Not Rated | M5 | 12mm | 2 | No | 00000000 | 00000 |
200mm | 12mm | __ | __ | 60mm | Not Rated | M6 | 12mm | 2 | No | 00000000 | 00000 |
250mm | 12mm | __ | __ | 60mm | Not Rated | M6 | 12mm | 2 | No | 00000000 | 00000 |
90° Offset Angle—Round Grip | |||||||||||
Aluminum—Dull | |||||||||||
8" | 1" | __ | __ | 3 1/2" | Not Rated | 1/4"-20 | 5/8" | 2 | Yes | 000000 | 00000 |
10" | 1" | __ | __ | 3 1/2" | Not Rated | 1/4"-20 | 5/8" | 2 | Yes | 0000000 | 00000 |
12" | 1" | __ | __ | 3 1/2" | Not Rated | 1/4"-20 | 5/8" | 2 | Yes | 00000000 | 00000 |
200mm | 20mm | __ | __ | 105mm | Not Rated | M8 | 15mm | 2 | No | 00000000 | 00000 |
303 Stainless Steel—Dull | |||||||||||
8" | 1" | __ | __ | 3 1/2" | Not Rated | 1/4"-20 | 5/8" | 2 | Yes | 000000 | 000000 |
10" | 1" | __ | __ | 3 1/2" | Not Rated | 1/4"-20 | 5/8" | 2 | Yes | 000000 | 000000 |
304 Stainless Steel—Dull | |||||||||||
12" | 1" | __ | __ | 3 1/2" | Not Rated | 1/4"-20 | 5/8" | 2 | Yes | 00000000 | 000000 |
200mm | 20mm | __ | __ | 105mm | Not Rated | M8 | 15mm | 2 | No | 00000000 | 000000 |
250mm | 28mm | __ | __ | 128mm | Not Rated | M10 | 17mm | 2 | No | 00000000 | 000000 |
300mm | 20mm | __ | __ | 105mm | Not Rated | M8 | 15mm | 2 | No | 00000000 | 000000 |
Unthreaded-Hole Offset Pull Handles
Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. The grip is offset from the mounting surface so there's room to fully grasp the handle. All of these handles include screw covers that snap on to conceal the mounting fasteners (not included).
Round grips allow your hand to pivot in any direction.
Oval grip conforms to your hand and offers more control than round grips.
Steel handles are rubber-coated for rust resistance.
Plastic handle is a lightweight alternative to metal. It resists oil, grease, and solvents.
For technical drawings and 3-D models, click on a part number.
Grip | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Offset Angle | Mount. Hole Ctr.-to-Ctr. Wd. | Dia. | Thick. | Wd. | Projection | No. of Mount. Holes | Mount. Fasteners Included | Mount. Screw Size | Temp. Range, °F | Includes | Each | |
Style 1—Round Grip | ||||||||||||
Black Rubber-Coated Steel—Dull | ||||||||||||
90° | 5 15/16" | 1 1/8" | __ | 6 7/8" | 2 5/8" | 2 | No | No. 12 | 32° to 100° | Screw Covers | 000000 | 000000 |
Style 2—Oval Grip | ||||||||||||
Black Plastic | ||||||||||||
90° | 3 15/16" | __ | 1 3/8" | 5 1/4" | 2 7/8" | 2 | No | M8 | -20° to 180° | Screw Covers | 0000000 | 00000 |
90° | 7 7/8" | __ | 1 5/16" | 9 1/2" | 3 15/16" | 2 | No | M8 | -20° to 180° | Screw Covers | 000000 | 00000 |