These switches are protected from corrosion, high-temperature and high-pressure washdowns, and oil/coolant spraying. Install them in 22 mm dia. cutouts.

Prevent accidental actuation from bumps or vibration—these switches require you to grip and twist the lever to turn the switch. The contact block and actuator are all one piece, so they won’t separate in high-vibration applications.

Prevent accidental actuation from bumps or jostles—these switches require you grip and twist a lever to turn them on or off. Install them in 30 mm dia. cutouts.

Avoid accidental actuation—these switches won’t turn on or off until you grip and twist the lever. Install in a 16 mm dia. cutout.

The enclosure not only protects these switches, but also adds options for how you install them.

Control multiple devices with one switch. Turn the shaft to change switch positions.

Alternate between two batteries without interrupting power.

To prevent accidental actuation and limit access to sensitive equipment, these switches require a key to turn circuits on or off. The contact block and actuator are all one piece, so they won’t separate in high-vibration applications.

Choose an actuator and contact block to make your own 22 mm metal switch.

Push and release the button to activate—no electricity required.

The large face makes these switches easy to read from a distance.

Use these switches in place of standard wall switches to automatically turn electrical equipment on or off after a set interval of time.

More precise than analog potentiometers, these have a three-digit display that is easy to read.

Considered solid state because they don’t have any moving parts, these timer relays last longer, switch faster, and are quieter than mechanical relays. They interface between your controller and components to isolate input and output circuits, preventing damage to your components from voltage spikes, amplifying the relay's signal, and reducing signal interference. They have multiple timing functions, so you don’t need to swap out your relay if you want to change their function.

For fast installation, mount these relays directly to 35 mm DIN rail (also known as DIN 3 rail). With no moving parts, these solid state relays last longer and require less maintenance, are quieter, and switch faster than mechanical relays.

Install these relays in a panel cutout or plug them into a relay socket. Unlike mechanical relays, these solid state relays have no moving parts, so they require less maintenance and last longer, are quieter, and switch faster.

Protect components from voltage spikes while amplifying the relay’s signal and reducing interference for reliable transmission—these relays interface between your controller and system components to isolate the input and output circuits. They have multiple timing functions, so you don’t need to swap out your relay if you want to change their function.