A single-piece construction prevents the contact block from separating from the actuator in high-vibration applications.

Clearly mark your emergency push-button switches.

Use these switches where ignitable gas and dust may be present. Their contact blocks are UL listed for Class I, Division 2, Groups B, C, and D hazardous locations.

Rated NEMA 3S, NEMA 4X, NEMA 13, and IP66, these plastic switches resist corrosion better than aluminum switches and withstand washdowns and oil/coolant spraying.

A red light flashes when the actuator is pushed, making it easy to see from a distance. They're rated IP65 for protection from washdowns.

Immediately cut power by pulling the cable.

Tug on the cable anywhere along your line to immediately cut the flow of power. This multi-functional unit also sends a signal to restart machinery with the push of a button, doing the job of two units in one.

With a slim shape, these switches fit comfortably in your hand.

Often used with machine guards, these switches mount to a door frame.

Light beams travel up to 32 ft. between the transmitter and receiver.

Install these switches in a panel cutout.

Cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance. These switches are housed in a protective enclosure that resists denting, chipping, and cracking.

With a housing that’s designed to contain an explosion, these switches are safe to use in areas where ignitable concentrations of flammable or combustible gas, dust, or fibers may be present.

A raintight NEMA 3R rated enclosure protects these switches outdoors.

Often used in electrical enclosures, these switches mount directly to DIN rails. They cut power and keep it isolated to stop equipment from starting up during inspection and maintenance.

If there’s a power outage, flip the toggle for each circuit on these switches to backup power.

Use these plastic plates to indicate the location for turning switches off in emergency situations.