Shackle is concealed to make it difficult to cut. Choose these locks if you need several locks that open with the same key. If the lock or key with the key number you want isn’t listed, order the "Other Key Numbers" and specify your desired key number. Stainless steel-body locks are more corrosion resistant than steel-body locks, but are not as strong.

Stainless steel shackles are more corrosion resistant than hardened steel shackles, but are not as strong.

Pin-tumbler key locking mechanisms are the most difficult locking mechanisms to pick. When choosing between padlocks with four or five pins, the lock with five pins is harder to pick.

For technical drawings and 3-D models, click on a part number.

With an extra-long shackle, these padlocks fit around oversized hasps and thick chains on outdoor equipment to prevent accidental startup during maintenance. They come in a variety of colors that grab your attention and display a warning label to alert you to locked-out machines. To adhere to lockout identification practices, assign colors to individuals or departments, such as blue for plumbing and red for electrical. Use them with another lockout device to comply with OSHA 29 CFR 1910.147 standards for safe lockouts. They’re made from materials that resist corrosion caused by rain and snow. Their plastic cover protects the lock body and prevents them from damaging nearby surfaces.

These padlocks don’t let you remove the key from the lock until you close the shackle. This makes sure you properly secure locks before walking away with the key. Choose these locks if you need several locks that open with the same key.

Steel shackles are stronger than stainless steel shackles.

Padlocks with a plastic-coated shackle add a layer of protection against corrosion. They’re less conductive than uncoated shackles, so they’re safer to use when locking out electrical equipment.

Made from corrosion-resistant materials, these padlocks lock out equipment outdoors and come in a variety of bold colors that stand out from regular padlocks. The body of these locks is enclosed in a plastic cover to protect against physical damage and corrosion. To adhere to lockout identification practices, assign colors to individuals or functions, such as blue for plumbing and red for electrical. Use them with a hasp, chain, or another lockout device to comply with OSHA 29 CFR 1910.147 standards for safe lockouts.

Choose these padlocks if you need several locks that open with the same key. They have a pin-tumbler key locking mechanism, which is the most difficult locking mechanism to pick. The more pins a lock has, the harder it is to force open.

Brass-body locks resist corrosion better than steel-body locks. They have a brass shackle that is more corrosion resistant than boron carbide but not as strong.

For technical drawings and 3-D models, click on a part number.

Shackle is concealed to make it difficult to cut. Choose these locks if you want individual locks or groups of locks that open with their own key, but also open with a master key. The included keys have random key numbers; master keys are sold separately. Stainless steel-body locks are more corrosion resistant than steel-body locks, but are not as strong.

Stainless steel shackles are more corrosion resistant than hardened steel shackles, but are not as strong.

Pin-tumbler key locking mechanisms are the most difficult locking mechanisms to pick. When choosing between padlocks with four or five pins, the lock with five pins is harder to pick.

For technical drawings and 3-D models, click on a part number.

With a tall shackle and a palette of colors to pick from, these locks are easy to spot around large hasps or thick chains. Assign a color to individuals or departments and use them with lockout devices to prevent people from using equipment during maintenance or repair. This helps you comply with OSHA 29 CFR 1910.147 safety procedures.

All have a pin-tumbler key locking mechanism, which is the most difficult locking mechanism to pick. The more pins a lock has, the harder it is to pick. Each opens with a different key, and all have random key numbers.

Style B locks have an aluminum body that resists corrosion better than locks with a steel body, but it’s not as strong. A plated shackle also makes them more reliable in harsh environments. Those with a copper-nickel-chrome-plated hardened steel shackle are plated with multiple layers to stand up to corrosion better than shackles with a single layer of chrome plating. Key-retaining locks don’t let you remove the key from the lock until you close the shackle. This makes sure you properly secure locks before walking away with the key.

Locks with a dual-locking shackle prevent attempts to force them open from prying, shimming, or tapping because both ends of the shackle lock inside the body.

For technical drawings and 3-D models, click on a part number.

Choose these locks if you need locks that each open with a different key. All locks have random key numbers.

Locks with a dual-locking shackle prevent attempts to force them open from prying, shimming, or tapping because both ends of the shackle lock inside the padlock body.

Aluminum-body locks are stronger and more corrosion resistant than zinc-body locks. They also resist corrosion better than steel-body locks, but they’re not as strong.

Zinc-body locks are more corrosion resistant than steel-body locks, but not as strong.

Hardened steel shackles are stronger than steel shackles.Those that are copper-nickel-chrome plated have an added layer of corrosion resistance and strength. Pin-tumbler key locking mechanisms are the most difficult to pick. The more pins a lock has, the harder it is to pick.

For technical drawings and 3-D models, click on a part number.

With over 1" of vertical shackle clearance, these padlocks give you extra room to secure thick chains and items with large hasps. Each lock opens with a different key, and all have random key numbers.

Aluminum-body locks balance strength and corrosion resistance. They’re stronger than zinc-body locks but not as strong as steel-body locks, and they’re more corrosion resistant than both.

Hardened steel shackles are tougher to cut or pry than steel shackles. Those that are copper-nickel-chrome plated have an added layer of corrosion resistance and strength.

Locks with a dual-locking shackle prevent attempts to force them open from prying, shimming, or tapping because both ends of the shackle lock inside the padlock body.

Locks with a pin-tumbler key locking mechanism are harder to pick than locks with a disc-tumbler key locking mechanism. The more pins a lock has, the harder it is to pick.

For technical drawings and 3-D models, click on a part number.

Designed to brave the elements, these padlocks have a brass body that resists corrosion caused by rain and snow. Use them around your facility, both indoors and out, to prevent theft and unauthorized access. They have a pin-tumbler key locking mechanism that is extremely difficult to pick—the more pins the lock has, the harder it is to force it open. Choose these padlocks if you need locks that each open with a different key. All have random key numbers.

Padlocks with a dual-locking shackle prevent attempts to break them open from prying, shimming, or tapping because both ends of the shackle lock inside the padlock body.

Hardened steel shackles are stronger than stainless steel and brass shackles. Stainless steel shackles are the most corrosion resistant.

Style C have a plastic cover that shields the key cylinder from water, snow, and other outdoor elements. This added protection makes them great for securing equipment in harsh weather conditions. Plastic also surrounds the lock body to prevent physical damage to the exterior of the lock.

For technical drawings and 3-D models, click on a part number.

Secure equipment with oversized hasps or thick chains outdoors. These padlocks have a shackle that's longer than typical padlocks. Made from materials that resist corrosion from rain and snow, they’ll operate smoothly even when exposed to the elements. They have a pin-tumbler key locking mechanism, which is the most difficult locking mechanism to pick. The more pins the lock has, the harder it is to force open. Choose these padlocks if you need locks that each open with a different key. All have random key numbers.

Padlocks with a dual-locking shackle prevent attempts to break them open from prying, shimming, or tapping because both ends of the shackle lock inside the padlock body.

Brass-body locks resist corrosion better than steel-body locks.

Stainless steel shackles are more corrosion resistant than both hardened steel and brass shackles.

Style D padlocks have a keyhole cover that prevents rain, snow, and other outdoor elements from getting inside the key cylinder.

For technical drawings and 3-D models, click on a part number.

The partially concealed shackle on these padlocks means more security for your outdoor equipment and gates than a traditional padlock. Since most of the shackle is covered, it's difficult to access and cut. For durability outdoors, they’re made from materials that resist corrosion from rain and snow.

These padlocks have a pin-tumbler key locking mechanism, which is the most difficult locking mechanism to pick. The more pins the lock has, the harder it is to force open. Choose these padlocks if you need locks that each open with a different key. All have random key numbers.

Style A padlocks have a round, compact lock body that prevents them from being forced open with bolt cutters. Their key cylinder is on the face of the body, so you don’t need to lift and adjust the padlock to insert in the key.

Style B padlocks have a key cylinder located on the side of the lock, so it’s easy to unlock when the body is tucked between surfaces.

Stainless-steel-body locks resist corrosion better than steel-body locks. Brass-body locks resist corrosion better than both steel-body locks and stainless-steel-body locks.

Stainless steel shackles resist corrosion better than hardened steel shackles. Hardened steel shackles are stronger than stainless steel shackles.

Padlocks with a keyhole cover keep out water and debris to protect the cylinder from freezing, corroding, and jamming.

For technical drawings and 3-D models, click on a part number.

Lock out equipment outdoors to prevent accidental startups during maintenance. These padlocks come in a variety of colors that grab your attention and display a warning label that alerts you to locked-out machines. Assign colors to individuals or functions, such as blue for plumbing and red for electrical, to help meet lockout identification standards. Use them with a hasp, chain, or another lockout device to comply with OSHA 29 CFR 1910.147 standards for safe lockouts. To confirm equipment remains securely locked out during maintenance or repair, these padlocks retain the key in the cylinder until the shackle is relocked. Choose them if you need to lock out several devices with the same key.

These padlocks are made from materials that resist corrosion caused by rain and snow and have a plastic cover for an extra layer of protection. The cover also prevents them from scuffing nearby surfaces.

Brass-body locks resist corrosion better than aluminum-body locks. Aluminum-body locks are stronger than brass-body locks, which makes them more difficult to force open.

Steel shackles are plated with a combination of copper, nickel, and chrome for added corrosion resistance. They’re also stronger than stainless steel shackles.

Shackles with a plastic coating resist corrosion. They’re less conductive than uncoated shackles, so they’re safer to use when locking out electrical equipment.

Padlocks with a 3″ body height have room for a second label (not included). They are useful when you need to add warning messages in multiple languages.

Fit the extra-long shackle of these padlocks around oversized hasps and chains to lock out equipment outdoors. They come in a variety of colors that catch your eye and display a warning label that alerts you to locked-out machines. Assign colors to individuals or functions, such as blue for plumbing and red for electrical, to meet lockout identification standards. To prevent accidental startups during maintenance, pair them with a lockout device. This helps you comply with OSHA 29 CFR 1910.147 standards for safe lockouts. Made from materials that resist corrosion from rain and snow, these locks will operate smoothly even when exposed to the elements. They have a plastic cover that protects the lock body and prevents them from damaging nearby surfaces.

These padlocks don’t let you remove the key from the lock until you close the shackle. This makes sure you properly secure locks before walking away with the key. These locks are keyed differently, so they each open with a different key.

Brass-body locks resist corrosion better than aluminum-body locks.Steel shackles are stronger than stainless steel shackles. Plastic-coated shackles help resist corrosion. The plastic also makes them less conductive, keeping you safe when locking out electrical panels or other equipment.

Open the shackle with a control key or the combination. Share the combination to give multiple users access without their own key. Control keys are sold separately. The shackle is hardened steel, which is strong and stands up to being dropped, tugged, or cut.

Hardened steel lock bodies are strong and hold up better against attempts to force them open than stainless steel lock bodies.

For technical drawings and 3-D models, click on a part number.

Wrap the flexible braided shackle around tools and equipment to prevent theft and unauthorized use. Unlike a standard rigid shackle, it can bend and weave to secure multiple points with only one padlock, even for items with irregular shapes or corners. The flexible shackle also lets you conceal the lock body behind objects or tuck into tight spaces. Because the shackle is thinner than a standard shackle or cable lock, it is easier to cut. The more pins a lock has the harder it is to pick. Choose these locks if you need locks that each open with a different key.

Locks with an aluminum body resist corrosion and weather better than locks with a steel body. They have a stainless steel shackle, which also resists corrosion better than steel shackles.

Weave the shackle on these padlocks through lockouts on outdoor valves, electrical panels, or other equipment during repairs without the hassle of extra cables or padlocks. To alert others to the maintenance, they have a warning label and come in a variety of striking colors. Assign colors to individuals or functions to follow lockout identification practices. For example, use blue for plumbing and red for electrical. These padlocks help you comply with OSHA 29 CFR 1910.147 standards for safe lockouts. To make sure equipment remains secure, these padlocks retain the key in the cylinder until the shackle is locked. Because the shackle is flexible, you can also tuck the body out of the way or fit it into tight spaces. However, the shackle is thinner than a standard padlock shackle, so it’s easier to cut. Each padlock opens with a different key and all have random key numbers.

The aluminum body and stainless steel shackle resist corrosion from rain and snow. A plastic cover over the body and a plastic coating on the braided shackle add another layer of protection from the elements and prevent scuffs on nearby surfaces.

Alert others to locked-out equipment—these padlocks come in a variety of colors that will stand out from a typical padlock. Assign a color to individuals or jobs, such as blue for plumbing or red for electrical. A long, flexible shackle simplifies your lockout process by replacing the need for a separate cable and padlock. Weave the shackle through multiple hasps or lockouts. To make sure you’ve secured equipment properly, you can’t take the key out until the shackle is locked. They help comply with OSHA 29 CFR 1910.147 standards for safe lockouts. Choose these padlocks if you need locks that each open with a different key. All locks have random key numbers.

The shackle is braided stainless steel with a plastic coating, which gives it an extra layer of corrosion resistance and prevents it from scratching nearby surfaces. While the flexible shackle allows it to bend into tight spaces and around small parts, it’s thinner than a standard padlock shackle, so it is easier to cut.