Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. Enclosures are made of nonconductive polycarbonate that resists denting, chipping, and cracking.

These enclosures have thicker walls than standard aluminum enclosures, but are still a lightweight yet durable alternative to stainless steel.

PVC enclosures are nonconductive and chemical resistant, withstanding solvents, alkalies, and acids.

With a hygienic design, these enclosures minimize spots where food, debris, and water could collect after washdowns. Use them to house and mount switches, buttons, and other components in sanitary environments.

Mounting feet make attachment to machines and walls hassle-free.

Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. These enclosures have a clear cover, so you can inspect components without opening the enclosure.

Mounting feet make attachment to machines and walls hassle-free. These enclosures are small and lightweight for use with sensors, switches, testing devices, and circuit boards.

Control access to these enclosures with a key-operated lock.

Protect electronics from washdowns in food plants and other sanitary environments. These enclosures mount directly into walls to protect wiring and reduce the surface area that needs to be cleaned. Standard-size push-button holes are already installed, saving you the effort of measuring and cutting holes yourself.

Holes in the cover allow easy installation of push buttons, switches, and indicating lights.

Made of polycarbonate, these enclosures resist denting, chipping, and cracking better than stainless steel enclosures.

Made of polycarbonate, these enclosures resist denting, chipping, and cracking better than stainless steel enclosures.

Lighter than stainless steel yet durable, these aluminum enclosures protect electronics from frequent washdowns and withstand periodic submersion in water.

Attach these enclosures to machine panels and walls by their mounting feet—no need to open the cover and expose sensors, switches, and other electronics in wet locations. Made of aluminum, they’re lighter in weight than stainless steel yet resist rusting from water.

Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components.

Install these enclosures on control panels and walls and inspect what’s inside without exposing their contents in wet and outdoor locations.

Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks. A clear cover lets you monitor the inside without opening them.

Mount these enclosures directly to machine control panels in wet environments and view the contents without opening them.

These enclosures are rated NEMA 13 for indoor protection from dirt and oil/coolant spraying.

Control access to these enclosures with a key-operated lock.

With standard-size, evenly spaced, aligned push-button holes, these washdown enclosures save you the time and effort of cutting those holes yourself.

Keep components safe from rain, snow, and ice. These enclosures are rated NEMA 3R for protection from dirt, falling liquids, and light splashing.

With an overhanging top and a NEMA 3RX rating, these enclosures guard electronics from snow, rain, and sleet as well as dirt and light splashing.

Fans built in to these enclosures keep electronics at the temperature you set, and the filtered intake and exhaust let cool air flow through the enclosure without letting water and contaminants in.

UL and C-UL classified, these enclosures safely house push-button controls and electronics where there’s explosive dust and gas.

These enclosures reduce electromagnetic interference (EMI) and radio frequency interference (RFI), which can cause electrical problems like flickering monitors, interrupted data signals, and unwanted radio noise.

House emergency stop buttons, life safety equipment, and other devices that need to be seen with these brightly colored enclosures, which are easy to spot even in high-dust areas.

Create a human-machine interface that’s designed to attach to a suspension arm, so you can move your HMI around.

These freestanding enclosures have a gasketed door with clamps to ensure a watertight seal. They are rated NEMA 4 and 13 for protection from dirt, washdowns, and oil/coolant spraying.

Mount these boxes to the outside of an enclosure to access a programmable logic controller or other networked device without opening the enclosure.

Close off unused outlets.

Close off unused outlets.

These corrosion-resistant covers can withstand rain, snow, and wet conditions without being damaged.

These corrosion-resistant boxes are built to withstand exposure to rain, snow, and wet conditions.

Add depth to your weatherproof outlet box.

Add a secondary panel that swings to mount more components in your enclosure.

Save time when wiring connections in a junction box; these blocks come already installed in an enclosure.

For use with washdown receptacles, these outlet boxes withstand corrosive and washdown environments.