We will reply to your message within an hour.
As the face of these plungers is pushed in, the internal spring applies outward pressure to hold a workpiece in position against stops and rails.
Set the tang in a slot below the work surface to prevent thin material from sliding underneath the face.
Sealed at the top to prevent debris from getting inside and making them seize up, these guide pins are a good choice for machining fixtures.
As the workpiece pushes against the pin head in one direction, the internal spring pushes back to hold it in place for clamping.
Threading makes these guide pins easier to remove and replace than press fit, so they're useful for high-wear applications.
Thread in a screw, handle, or other part to create the right size and shape guide pin for your application.
Use these tools for easier guide pin installation.
Slide these low-profile supports under a workpiece to provide support and reduce vibration.
Lock the nose into the retracted position by pulling the handle and rotating it 90°.
Lock the nose into the retracted position by pulling the knob and rotating it 90°.
Quickly align, join, or hold machine components in place in food, pharmaceutical, and other sanitary environments. Pulling the plunger knob and twisting it 90° will lock the nose into its retracted position.
Retract the nose by pulling the knob.
Thread onto machinery or attach a knob or handle to the threaded spindle.
Lock the nose into the retracted position by pulling the ring and rotating it 90°.
The ring allows you to attach these spring plungers to a lanyard.
Use the lanyard as a tether to secure the spring plunger to machinery and prevent accidental drops.
Lock the nose into the retracted position by pulling and rotating the knob.
Two holes in the plate allow these plungers to be mounted to a flat surface.
Install with a driver.
Slotted on both ends for installation with a screwdriver.
Fasten from the nose end with a wrench for more torque than slotted long-nose spring plungers.
These spring plungers have a nose that is about three-times longer than standard long hex-nose spring plungers.
Install with a hex key for more torque than slotted long-nose spring plungers.
A flange keeps the plunger from being pushed through a hole when the ball is depressed.
Noses are up to four times longer than standard long-nose press-fit spring plungers.
Install with a hex key for more torque than slotted ball-nose spring plungers.
Install these spring plungers with a screwdriver—they're slotted on one or both ends.
The flangeless design allows these spring plungers to mount flush with a surface.
Designed with a flange to keep the plunger from being pushed through a hole when the ball is depressed.
An O-ring in the flange creates a tight seal.