For use with a single line, these clamps brace pipe, tubing, and conduit directly against the mounting surface.

For areas with low clearance, these clamps have the mounting fastener to the side of the material, rather than on top.

Route pipe, tubing, and conduit across strut channel.

Organize multiple lines of pipe, tubing, or hose with a single clamp. They are polyethylene for good chemical and UV resistance.

For use on a single line, these polypropylene clamps withstand moisture and most chemicals. They're commonly used to route tubing in compressed air systems. A folding arm closes to secure material.

Backed with foam adhesive tape, these clamps mount to any smooth surface—no fasteners required. They are noncorrosive, nonconductive nylon.

Join these clamps together to line up multiple pipes, cables, or tubes side-by-side, even when they are different sizes.

Temporarily route material across duct, racks, machinery, and other ferrous surfaces. Clamps fit tightly around pressurized lines in hydraulic systems to lessen vibration. Rubber cushions reduce wear from clamp edges and protect lines from corrosion caused by metal-to-metal contact.

A cushion covering the clamp reduces vibration and wear from clamp edges. Clamps surround lines of pipe, tubing, and conduit completely while holding them close to the mounting surface.

A molded cushion reduces vibration and wear from clamp edges, plus it provides a tighter fit around material than standard vibration-damping loop clamps.

Organize multiple lines of pipe, tubing, and conduit with one clamp. Wider than standard loop clamps, multiline loop clamps surround two lines of material to create a secure grip while holding the lines close to the mounting surface.

A time-saving alternative to strap hangers, these hangers fit a range of material sizes without any cutting and easily adjust after they’re installed.

These plastic hangers prevent corrosion caused by metal-to-metal contact. Push them closed for a more secure hold on material than loop hangers.

Rubber cushions fit material tightly to reduce vibration and provide a more secure hold than loop hangers. The cushions also protect material from sharp edges and prevent corrosion caused by metal-to-metal contact.

Use in medium-pressure applications up to 600 psi.

Stop leaks where a fitting and a pipe join without turning off your line.

A dimple in the ear creates spring-like action that allows these clamps to withstand vibration and temperature changes without loosening.

Clamps come packed in a box with individual compartments for each clamp size. To make sure they won’t cut into hose and tube, they have a smooth band with rolled edges.

An extended tail acts as a liner to protect hose and tube from being cut by the slots in the band.

Create 2" diameter and larger smooth-band worm-drive clamps.

Remove the bolt and flip open the hinged bridge to install.

Slide these clamps over your hose and heat-shrink them with a heavy duty heat gun. This process lets them conform to any shape hose.

Made of our most corrosion resistant stainless steel, these worm-drive clamps stand up to harsh acids and chemicals. Their band is smooth and has rolled edges, so they won’t cut into your hose or tube.

Clamps offer extra holding power in high-torque applications.

Unlike vibration-resistant pinch clamps, these have a torque rating for extra holding power in high-vibration applications. They are also known as high-torque clamps.

Make quick changeovers without sacrificing a tight seal.

Clamps have a slotted hex-head screw that flips up to release the band for quick opening.

Used to secure Viega PEX fittings to Viega PEX tubing, these clamps meet an ASTM standard to ensure compatibility.

To prevent removal, these clamps can only be loosened with a special bit or screwdriver.

Made of nylon, these clamps have excellent corrosion and chemical resistance, don’t conduct electricity, and weigh less than metal clamps.

Designed for both permanent connections and emergency repairs, use these buckles with banding to create your own low-profile hose clamps.

Keep this banding on hand for both permanent connections and emergency repairs. You'll need an installation tool and a buckle (both sold separately) to create a band clamp.

Unlike other pinch clamps, these have a unique tongue-and-groove design that creates a gap-free seal to reduce leaks.

The end of the band curls back into the buckle—this gives these clamps up to 25% more strength than other low-profile clamps. They are also known as JS-style clamps.

These clamps are easier to install than worm-drive clamps—crimp the pinch points with pinch-clamp pincers for a secure hold. They are also known as ear clamps.

Prevent static charge buildup while securely connecting duct hose with a wire spiral.

Unlike other duct hose clamps, these are rated for a maximum work load. Clamps have a quick-release latch that lets you access your line frequently while maintaining your original clamp size.

Repair pinholes, punctures, and cracks in low-pressure systems with these clamps. Insert tubing into the clamp and tighten the bolts to create a secure seal.

Color code hose and tube lines in your facility to identify them at a glance.