McMaster-Carr logo
    Filter by
    System of Measurement
    Thread Size
    Industrial Info Snippet
    Thread Pitch
    Industrial Info Snippet
    Attribute Image
    Hex Nut Profile
    Industrial Info Snippet
    Thread Direction
    Industrial Info Compare
    Industrial Info Snippet
    Industrial Info Snippet
    Nut Type
    Industrial Info Compare
    Industrial Info Snippet
    Industrial Info Snippet
    Thread Spacing
    Industrial Info Compare
    Industrial Info Snippet
    Industrial Info Snippet
    Industrial Info Snippet
    Thread Type
    Thread Fit
    Industrial Info Snippet
    Fastener Strength Grade/Class
    Industrial Info Snippet
    Industrial Info Snippet
    Fastener Strength Rating
    Spanner Wrench Style
    DFARS Specialty Metals
    Industrial Info Compare
    Drive Style
    Industrial Info Snippet
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    25 Products

    Thin-Profile Hex Nuts

    About half the height of standard-profile nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.
    Medium-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    These Grade 5 or Class 04 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Zinc-Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread Size
    Wd.,
    mm
    Ht.,
    mm
    Fastener Strength
    Grade/Class
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    M30 × 2 mm4615ISO Class 04
    		DIN 439B, ISO 4035100000000000000
    M30 × 3.5 mm4615ISO Class 04
    		DIN 439B, ISO 403510000000000000
     
    Zinc-Yellow-Chromate-Plated Steel
    M30 × 2 mm4615ISO Class 04
    		DIN 439B, ISO 403510000000000000
     
    Steel
    M30 × 1.5 mm4612—DIN 93610000000000000
    M30 × 2 mm4612—DIN 93610000000000000
    M30 × 2 mm4615ISO Class 04
    		DIN 439B, ISO 403510000000000000
    M30 × 3.5 mm4612—DIN 93610000000000000
    M30 × 3.5 mm4615—DIN 439B, ISO 403510000000000000
     
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Thread Size
    Wd.,
    mm
    Ht.,
    mm
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    M30 × 1.5 mm4612DIN 9361000000000000000
    M30 × 1.5 mm4615DIN 439B, ISO 4035100000000000000
    M30 × 2 mm4615DIN 439B, ISO 4035100000000000000
    M30 × 3.5 mm4612DIN 936100000000000000
    M30 × 3.5 mm4615DIN 439B, ISO 4035100000000000000
     
    Super-Corrosion-Resistant 316 Stainless Steel
    M30 × 2 mm4615DIN 439B, ISO 4035100000000000000
    M30 × 3.5 mm4612DIN 936100000000000000
    M30 × 3.5 mm4615DIN 439B, ISO 4035100000000000000
     

    Left-Hand-Thread Thin-Profile Hex Nuts

    These nuts tighten when turned to the left. Use them with left-hand rods and screws to prevent counterclockwise-moving parts from loosening. About half the height of standard-profile nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.
    Medium-Strength Steel
    Image of Product. Front orientation. Contains Annotated, MultipleImages. Hex Nuts. Left-Hand-Thread Thin-Profile Hex Nuts.
    These Grade 5 or Class 04 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    Thread Size
    Wd.,
    mm
    Ht.,
    mm
    Fastener Strength
    Grade/Class
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Black-Oxide Steel
    M30 × 1.5 mm4615ISO Class 04
    		ASTM A108, DIN 439B, ISO 40351000000000000000
    M30 × 2 mm4615ISO Class 04
    		ASTM A108, DIN 439B, ISO 4035100000000000000
    M30 × 3.5 mm4615ISO Class 04
    		ASTM A108, DIN 439B, ISO 4035100000000000000
     
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Contains Annotated, MultipleImages. Hex Nuts. Left-Hand-Thread Thin-Profile Hex Nuts.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Thread Size
    Wd.,
    mm
    Ht.,
    mm
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    M30 × 1.5 mm4615DIN 439B1000000000000000
    M30 × 2 mm4615DIN 439B100000000000000
     
    Super-Corrosion-Resistant 316 Stainless Steel
    M30 × 1.5 mm4615DIN 439B, ISO 4035100000000000000
     

    Bearing Nuts

    Image of Product. Front orientation. Bearing Nuts. Bearing Nuts, Carbon Steel, Stepped Face.

    Carbon Steel

    Stepped Face

    Often paired with spring lock washers to strengthen their hold, these bearing nuts—also known as shaft nuts—keep vibration from shifting bearings, bushings, pulleys, and gears on your threaded shaft or spindle. They have slotted sides, so you can tighten and loosen them with a spanner wrench or spanner socket.
    Carbon Steel—Carbon steel bearing nuts are strong and resist wear.
    Stepped Face—Use stepped-face bearing nuts with DIN 462 spring lock washers. You can also use them in pairs or with other bearing nuts. For the nut closer to the bearing, position the stepped face towards the bearing. All meet DIN standards for bearing lockout dimensions.
    Thread Spacing—When choosing your thread spacing, consider the precision of your application. The finer the threads, the more control you have when making adjustments.
    Nuts
    Bearing
    Lock Washers
    Thread
    Size
    Spacing
    OD,
    mm
    Wd.,
    mm
    Specs.
    Met
    For Lock Washer
    Specs. Met
    Each
    Each
    Carbon Steel
     
    Stepped Face
    M30 × 1.5 mmExtra Fine
    		5010DIN 1804DIN 462000000000000000000000000000
     

    Thin-Profile Bearing Nuts

    Image of System. Front orientation. Contains Annotated. Bearing Nuts. Thin-Profile Bearing Nuts.
    Image of Product. Front orientation. Bearing Nuts. Thin-Profile Bearing Nuts.
    Used in pairs or with another bearing nut, these thin-profile nuts—often called shaft nuts—hold bearings, bushings, pulleys, and gears in place on your threaded shaft or spindle. Threading two nuts tightly against each other makes it harder for vibration to loosen your assembly than if you used only one nut. For the nut closer to the bearing, position the stepped face towards the bearing. These thin-profile nuts have holes on the side, so you can tighten and loosen them with a pin spanner wrench. All meet DIN 1816, an international standard for bearing locknut dimensions.
    Carbon Steel—Carbon steel bearing nuts are strong and resist wear.
    Thread Spacing—When choosing your thread spacing, consider the precision of your application. The finer the threads, the more control you have when making adjustments.
    Thread
    Size
    Spacing
    OD,
    mm
    Wd.,
    mm
    Specs.
    Met
    Each
    Carbon Steel
     
    Stepped Face
    M30 × 1.5 mmExtra Fine
    		5010DIN 18160000000000000
     
    back to top