The fluorescent yellow fabric and reflective stripes on these sweatshirts make you stand out. They meet Class 3 ANSI/ISEA 107 standards for high-visibility clothing, so you’ll be seen from ¼ mile away. These sweatshirts also meet Category 3 NFPA 70E and NFPA 2112 for moderate protection against flames and electrical arc flashes. Made with a modacrylic/aramid blend, these sweatshirts are both durable and comfortable. To help prevent body heat from escaping, they have snug knit cuffs and a snug knit waistband. Keep your hands warm in the exterior pocket. They have an interior pocket for storage.

When choosing clothing to protect you from arc flashes, match the arc rated personal protective equipment (PPE) category required by your workplace.

These shirts meet NFPA 70E and NFPA 2112 standards for protecting your torso and arms from electrical arc flashes and flames. Choose shirts that meet the arc rated category for your workplace. The higher the arc rating, the greater the flame resistance. These shirts are arc fire protection rated Category 2, the most common rating for industrial applications. Since they’re made of breathable and moisture-wicking materials, you stay cool. They have buttons down the front and on the cuffs, as well as two chest pockets.

When measuring chest size, measure around the fullest part of your chest.

Shirts with mesh vents allow cool air in as your shift your shoulders. The vents are hidden on the upper back.

Stay visible—even in dim light—and shielded from flames and arc flash hazards. These shirts meet NFPA 70E and NFPA 2112 standards for protecting your torso and arms against flash fire and electrical arc flashes. Choose shirts that meet the arc rated category required by your workplace. These shirts are rated Category 2, the most common rating for industrial applications. Bright in color and decked out with reflective strips, these shirts meet Class 3 ANSI/ISEA 107 to make you visible from a ¼ mile away. Use them around moving vehicles, on busy shop floors, and when operating machinery.

Made of cotton/nylon blend, these shirts are breathable and moisture wicking, so you won’t get too hot. They have concealed mesh vents on the back that let air in and keep you cool as you move.

When measuring chest size, measure around the fullest part of your chest.

These vests meet NFPA 70E and NFPA 2112 to protect your torso against arc flash and flash fire. They are rated Category 3 to provide moderate protection when worn over a flame- and arc-flash rated long-sleeve shirt or sweatshirt. Made of Nomex aramid fabric, these vests are flame resistant and they also resist wear and abrasion. A flap covers the snaps, so they won't scratch equipment or heat up if there's a fire. These vests have a fleece lining to keep you warm.

Choose a vest that meets the arc rated personal protective equipment (PPE) category required by your workplace. The higher the arc rating, the greater the flame resistance.

Withstand flash fire for up to 8 seconds—the clothes in these kits can protect you for twice as long as most flame-resistant clothing. Made of rayon/aramid, the coveralls and mask absorb moisture to keep you cool and comfortable.

The coveralls have a 10 ft. Kevlar strap, so nearby teammates can pull you to safety without putting themselves at risk if there’s a fire. The reflective stripes keep you easy to see where there's low visibility. The zipper closure on the front is covered by a hook-and-loop flap so it doesn't scrape equipment or get hot. The legs have zippers on the sides as well, so you can fit them over bulky boots. Tighten the hook and loop straps on the bottom of the pants to keep flames out. The sleeves have cuffs with thumb holes to keep the sleeves in place and prevent flames from sneaking in.

Measure around the fullest part of your chest to determine your size. Take all measurements over any clothing you expect to wear under the coveralls.

Clothing kits cannot be sold to the listed areas due to product regulations.