We will reply to your message within an hour.
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.
Capable of handling temperatures from -400° to 750° F, these graphalloy bearings withstand the widest temperature range of any of our mounted bearings.
A reliable classic—these babbitt bearings are strong and corrosion resistant.
Capable of handling temperatures from -400° to 750° F, these graphalloy bearings have the widest temperature range of any of our mounted bearings.
With no moving parts, sleeve bearings are better for dirty environments than ball and roller bearings.
The screw connections on these bushings easily mate to compatible quick-disconnect sprockets and pulleys.
Mount these hubless bushings flush into your sprocket or pulley for a slim profile with no protruding screws.
The tapered barrel on these bushings is split on both sides, allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings.
Use the adjustment screw in the housing to tighten or loosen the snugness (also known as preload) of the bearing to your shaft.
When your shafts are not close enough to use standard couplings, these have the length to bridge the gap.
Each hub includes a set screw (unless noted), which bites into your shaft to hold the coupling in place.
Customize the bore of these flexible couplings to align uncommon shaft sizes as well as shafts that have become undersized from wear or oversized from coatings.
A flexible tire on these couplings safeguards components on your shafts by reducing vibration and shock.
For use with splined shafts, which are commonly found in gearboxes and pumps, these couplings are capable of transmitting more torque than couplings for round and keyed shafts.
Connect splined shafts to keyed shafts. These couplings are commonly used to connect hydraulic pumps, compressors, and other heavy duty equipment, which often have splined shafts, to electric motors and other components that often have keyed shafts.
Also known as single-start and self-locking lead screws and nuts, these have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won't unexpectedly move when the lead screw is at rest.
Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start.
Found in hand-powered clamps, vises, grates, doors, and work tables, lead screws and nuts have broad, square threads that are well suited for quick assembly, high clamping forces, and lifting and lowering heavy objects.
Use these fittings for low-pressure applications in noncorrosive environments.
To prevent leaks in low-pressure lines, the male threads on these fittings have an acrylic sealant already applied for extra protection.
Suitable for use in fire-protection applications, these pipe fittings are made of cast iron, so they are brittle and can be quickly opened with the strike of a sledge hammer.
The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.
The male threads on these fittings have a sealant applied for extra leak protection.
Stronger than aluminum cord grips, these grips are zinc plated for corrosion resistance. They have a steel locknut and metal-reinforced O-ring that prevents liquid from entering the connection.
Stronger than aluminum cord grips, these grips are zinc plated for corrosion resistance.
When connected to a clevis rod end, these pivot brackets allow a hydraulic cylinder to move in an arc.