90° Angle Insulation | McMaster-Carr

Filter by

Shape

System of Measurement

Outside Width

Wall Thickness

Outside Height

Color

Length

Material

Performance

Inside Width

Flexibility

Inside Height

Inside Corner Shape

Maximum Temperature

Clarity

Thickness

Outside Corner Shape

For Use Outdoors

Leg Edge Shape

Hardness Rating

REACH Compliance

RoHS Compliance

DFARS Compliance

Forward

How can we improve?

119 Products

About Composites

About Durometer Hardness Scales

About Plastic

Color: Yellow
Max. Temperature: 265° F
Tensile Strength: 32,000-40,000 psi (Excellent)
Impact Strength: 5.5-9.5 ft.-lbs./in. (Excellent)
Hardness: Rockwell M100 (Extra Hard)
For Use Outdoors: No
Specifications Met: MIL-I-24768/27

A good all-around choice, these Garolite G-10/FR4 angles are strong, machinable, and electrically insulating. They're made of flame-retardant epoxy resin with fiberglass fabric reinforcement. Garolite G-10/FR4 is also called epoxy-grade industrial laminate and phenolic.

For technical drawings and 3-D models, click on a part number.

Outside				Inside		36" Lg.
Wd.	Wd. Tolerance	Ht.	Ht. Tolerance	Wd.	Ht.		Each
1/16" Wall Thick. (-0.028" to 0.028")
1"	-0.063" to 0.063"	1"	-0.063" to 0.063"	15/16"	15/16"	0000000	0000000
1 1/2"	-0.063" to 0.063"	1 1/2"	-0.063" to 0.063"	1 7/16"	1 7/16"	0000000	000000
2"	-0.063" to 0.063"	2"	-0.063" to 0.063"	1 15/16"	1 15/16"	0000000	000000
1/8" Wall Thick. (-0.028" to 0.028")
1"	-0.063" to 0.063"	1"	-0.063" to 0.063"	7/8"	7/8"	0000000	000000
1 1/2"	-0.063" to 0.063"	1 1/2"	-0.063" to 0.063"	1 3/8"	1 3/8"	0000000	000000
2"	-0.063" to 0.063"	2"	-0.063" to 0.063"	1 7/8"	1 7/8"	0000000	000000
3/16" Wall Thick. (-0.028" to 0.028")
1"	-0.063" to 0.063"	1"	-0.063" to 0.063"	13/16"	13/16"	0000000	000000
1 1/2"	-0.063" to 0.063"	1 1/2"	-0.063" to 0.063"	1 5/16"	1 5/16"	0000000	000000
2"	-0.063" to 0.063"	2"	-0.063" to 0.063"	1 13/16"	1 13/16"	0000000	000000
1/4" Wall Thick. (-0.028" to 0.028")
1"	-0.063" to 0.063"	1"	-0.063" to 0.063"	3/4"	3/4"	0000000	000000
1 1/2"	-0.063" to 0.063"	1 1/2"	-0.063" to 0.063"	1 1/4"	1 1/4"	0000000	000000
2"	-0.063" to 0.063"	2"	-0.063" to 0.063"	1 3/4"	1 3/4"	0000000	000000

Arc-Resistant Garolite G-9 Angles

Color: Gray
Maximum Temperature: 280° F
Tensile Strength: 30,000-37,000 psi (Excellent)
Impact Strength: 5.5-7.0 ft.-lbs./in. (Excellent)
Hardness: Rockwell M120 (Extra Hard)
For Use Outdoors: Yes
Specifications Met: UL 94 V-0

Machine these angles into arc barriers, switch mounts, and components for circuit breakers and electrical equipment. They resist carrying electric currents in dry or humid areas, even when exposed to sudden electric discharge. Strong, they’re also good for making terminal boards and other structural parts. They won’t crack if hit, and they resist breaking while carrying heavy loads. Meets UL 94 V-0 for flame retardance.

Garolite G-9 is also known as electrical-grade Garolite, melamine-grade industrial laminate, phenolic, and Bakelite.

For technical drawings and 3-D models, click on a part number.

Outside				Inside		36" Length
Width	Width Tolerance	Height	Height Tolerance	Width	Height		Each
1/8" Wall Thick. (-0.03" to 0.03")
1"	-0.125" to 0.125"	1"	-0.125" to 0.125"	7/8"	7/8"	00000000	0000000
1 1/2"	-0.187" to 0.187"	1 1/2"	-0.187" to 0.187"	1 3/8"	1 3/8"	00000000	000000
2"	-0.25" to 0.25"	2"	-0.25" to 0.25"	1 7/8"	1 7/8"	00000000	000000
3/16" Wall Thick. (-0.04" to 0.04")
1"	-0.125" to 0.125"	1"	-0.125" to 0.125"	13/16"	13/16"	00000000	000000
1 1/2"	-0.187" to 0.187"	1 1/2"	-0.187" to 0.187"	1 5/16"	1 5/16"	00000000	000000
2"	-0.25" to 0.25"	2"	-0.25" to 0.25"	1 13/16"	1 13/16"	00000000	000000
1/4" Wall Thick. (-0.05" to 0.05")
1"	-0.125" to 0.125"	1"	-0.125" to 0.125"	3/4"	3/4"	00000000	000000
1 1/2"	-0.187" to 0.187"	1 1/2"	-0.187" to 0.187"	1 1/4"	1 1/4"	00000000	000000
2"	-0.25" to 0.25"	2"	-0.25" to 0.25"	1 3/4"	1 3/4"	00000000	000000

Arc-Resistant GPO3 Fiberglass 90° Angles

Color: Red
Tensile Strength: 10,000-15,000 psi (Good)
Impact Strength: 8.2-12 ft.-lbs./in. (Excellent)
Hardness: See table
For Use Outdoors: No
Specifications Met: UL 94 V-0

Because these GPO3 fiberglass 90° angles are arc and track resistant, they are often used for electrical applications in humid environments. They offer better electrical insulation properties than FRP fiberglass. Made of fiberglass-reinforced polyester, they're also called polyester-grade industrial laminate.

For technical drawings and 3-D models, click on a part number.

Outside				Inside
Wd.	Wd. Tolerance	Ht.	Ht. Tolerance	Wd.	Ht.	Hardness	Straightness Tolerance		Each
3 ft. Lg.
3/16" Wall Thick. (-0.0200" to 0.0200")
2 9/16"	-0.094" to 0.094"	1 5/8"	-0.094" to 0.094"	2 3/8"	1 7/16"	Barcol 50 (Hard)	0.050" per ft.	0000000	000000
4"	-0.094" to 0.094"	1 5/8"	-0.094" to 0.094"	3 13/16"	1 7/16"	Barcol 50 (Hard)	0.050" per ft.	0000000	00000
1/4" Wall Thick. (-0.0200" to 0.0200")
2"	-0.094" to 0.094"	2"	-0.094" to 0.094"	1 3/4"	1 3/4"	Barcol 50 (Hard)	0.050" per ft.	0000000	00000
3"	-0.094" to 0.094"	2 3/4"	-0.094" to 0.094"	2 3/4"	2 1/2"	Barcol 50 (Hard)	0.050" per ft.	0000000	00000
4 ft. Lg.
1/8" Wall Thick. (-0.0200" to 0.0200")
1"	-0.062" to 0.062"	1"	-0.062" to 0.062"	7/8"	7/8"	Rockwell M95 (Hard)	0.050" per ft.	00000000	00000
1 1/4"	-0.062" to 0.062"	1 1/4"	-0.062" to 0.062"	1 1/8"	1 1/8"	Rockwell M95 (Hard)	0.050" per ft.	00000000	00000
1 1/2"	-0.062" to 0.062"	1 1/2"	-0.062" to 0.062"	1 3/8"	1 3/8"	Rockwell M95 (Hard)	0.050" per ft.	00000000	00000
3/16" Wall Thick. (-0.0200" to 0.0200")
1 1/4"	-0.062" to 0.062"	1 1/4"	-0.062" to 0.062"	1 1/16"	1 1/16"	Rockwell M95 (Hard)	0.050" per ft.	00000000	00000
1 1/2"	-0.062" to 0.062"	1 1/2"	-0.062" to 0.062"	1 5/16"	1 5/16"	Rockwell M95 (Hard)	0.050" per ft.	00000000	00000
2"	-0.062" to 0.062"	2"	-0.062" to 0.062"	1 13/16"	1 13/16"	Rockwell M95 (Hard)	0.050" per ft.	00000000	00000
2 1/4"	-0.062" to 0.062"	1 1/2"	-0.062" to 0.062"	2 1/16"	1 5/16"	Rockwell M95 (Hard)	0.050" per ft.	00000000	00000
2 1/2"	-0.062" to 0.062"	1 1/4"	-0.062" to 0.062"	2 5/16"	1 1/16"	Rockwell M95 (Hard)	0.050" per ft.	00000000	00000
1/4" Wall Thick. (-0.0200" to 0.0200")
1 1/2"	-0.062" to 0.062"	1 1/2"	-0.062" to 0.062"	1 1/4"	1 1/4"	Rockwell M95 (Hard)	0.050" per ft.	00000000	00000
2 3/4"	-0.062" to 0.062"	2"	-0.062" to 0.062"	2 1/2"	1 3/4"	Rockwell M95 (Hard)	0.050" per ft.	00000000	000000
3"	-0.062" to 0.062"	3"	-0.062" to 0.062"	2 3/4"	2 3/4"	Rockwell M95 (Hard)	0.050" per ft.	00000000	00000
3/8" Wall Thick. (-0.0250" to 0.0250")
1 3/4"	-0.062" to 0.062"	2"	-0.062" to 0.062"	1 3/8"	1 5/8"	Rockwell M95 (Hard)	0.050" per ft.	00000000	00000
3"	-0.062" to 0.062"	3"	-0.062" to 0.062"	2 5/8"	2 5/8"	Rockwell M95 (Hard)	0.050" per ft.	00000000	000000
1/2" Wall Thick. (-0.0250" to 0.0250")
6"	-0.062" to 0.062"	3"	-0.062" to 0.062"	5 1/2"	2 1/2"	Rockwell M95 (Hard)	0.050" per ft.	00000000	000000
6 ft. Lg.
1/8" Wall Thick. (-0.0200" to 0.0200")
1"	-0.062" to 0.062"	1"	-0.062" to 0.062"	7/8"	7/8"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
1 1/4"	-0.062" to 0.062"	1 1/4"	-0.062" to 0.062"	1 1/8"	1 1/8"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
1 1/2"	-0.062" to 0.062"	1 1/2"	-0.062" to 0.062"	1 3/8"	1 3/8"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
3/16" Wall Thick. (-0.0200" to 0.0200")
1 1/4"	-0.062" to 0.062"	1 1/4"	-0.062" to 0.062"	1 1/16"	1 1/16"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
1 1/2"	-0.062" to 0.062"	1 1/2"	-0.062" to 0.062"	1 5/16"	1 5/16"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
2"	-0.062" to 0.062"	2"	-0.062" to 0.062"	1 13/16"	1 13/16"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
2 1/4"	-0.062" to 0.062"	1 1/2"	-0.062" to 0.062"	2 1/16"	1 5/16"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
2 1/2"	-0.062" to 0.062"	1 1/4"	-0.062" to 0.062"	2 5/16"	1 1/16"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
2 9/16"	-0.094" to 0.094"	1 5/8"	-0.094" to 0.094"	2 3/8"	1 7/16"	Barcol 50 (Hard)	0.050" per ft.	0000000	00000
4"	-0.094" to 0.094"	1 5/8"	-0.094" to 0.094"	3 13/16"	1 7/16"	Barcol 50 (Hard)	0.050" per ft.	0000000	000000
1/4" Wall Thick. (-0.0200" to 0.0200")
1 1/2"	-0.062" to 0.062"	1 1/2"	-0.062" to 0.062"	1 1/4"	1 1/4"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
2"	-0.094" to 0.094"	2"	-0.094" to 0.094"	1 3/4"	1 3/4"	Barcol 50 (Hard)	0.050" per ft.	0000000	00000
2 3/4"	-0.062" to 0.062"	2"	-0.062" to 0.062"	2 1/2"	1 3/4"	Rockwell M95 (Hard)	0.050" per ft.	0000000	000000
3"	-0.094" to 0.094"	2 3/4"	-0.094" to 0.094"	2 3/4"	2 1/2"	Barcol 50 (Hard)	0.050" per ft.	0000000	000000
3"	-0.062" to 0.062"	3"	-0.062" to 0.062"	2 3/4"	2 3/4"	Rockwell M95 (Hard)	0.050" per ft.	0000000	000000
3/8" Wall Thick. (-0.0250" to 0.0250")
1 3/4"	-0.062" to 0.062"	2"	-0.062" to 0.062"	1 3/8"	1 5/8"	Rockwell M95 (Hard)	0.050" per ft.	0000000	000000
3"	-0.062" to 0.062"	3"	-0.062" to 0.062"	2 5/8"	2 5/8"	Rockwell M95 (Hard)	0.050" per ft.	0000000	000000
1/2" Wall Thick. (-0.0250" to 0.0250")
6"	-0.062" to 0.062"	3"	-0.062" to 0.062"	5 1/2"	2 1/2"	Rockwell M95 (Hard)	0.050" per ft.	0000000	000000

Chemical-Resistant Slippery PTFE 90° Angles

Color: White
Temperature Range: -350° to 500° F
Tensile Strength: 2,170-2,800 psi (Poor)
Impact Strength: 3.5 ft.-lbs./in. (Good)
Hardness: Durometer 52D-55D (Medium Soft)
For Use Outdoors: Yes
Specifications Met: FDA Compliant 21 CFR 177.1550, SAE AMS3671, ASTM D1710, UL 94 V-0

Often used as guide rails and with parts that slide, these 90° angles have a slippery surface that prevents sticking. PTFE surpasses most plastic when it comes to chemical resistance and performance in extreme temperatures. It’s also an excellent electrical insulator and easy to machine.

For technical drawings and 3-D models, click on a part number.

		Outside			Inside
Wall Thick.	Wall Thick. Tolerance	Ht.	Ht. Tolerance	Wd.	Ht.	Wd.	Lengths, ft.		Per Ft.
1/16"	0.000" to 0.015"	1/2"	-0.05" to 0.05"	1/2"	7/16"	7/16"	1, 2, 3, 4, 5	0000000	000000
1/16"	Not Rated	3/4"	Not Rated	3/4"	11/16"	11/16"	1, 2, 3, 4, 5	0000000	00000
1/8"	0.000" to 0.015"	1"	-0.05" to 0.05"	1"	7/8"	7/8"	1, 2, 3, 4, 5	0000000	00000
1/8"	Not Rated	1 1/4"	Not Rated	1 1/4"	1 1/8"	1 1/8"	1, 2, 3, 4, 5	0000000	00000
1/4"	0.000" to 0.015"	1 1/2"	-0.05" to 0.05"	1 1/2"	1 1/4"	1 1/4"	1, 2, 3, 4, 5	0000000	00000
1/4"	Not Rated	1 3/4"	Not Rated	1 3/4"	1 1/2"	1 1/2"	1, 2, 3, 4, 5	0000000	00000
1/4"	0.000" to 0.015"	2"	-0.05" to 0.05"	2"	1 3/4"	1 3/4"	1, 2, 3, 4, 5	0000000	00000

Slippery UHMW Polyethylene 90° Angles

Color: White
Temperature Range: -20° F to 180° F
Tensile Strength: 4,350-5,800 psi (Poor)
Impact Strength: 16.8 ft.-lbs./in. (Excellent)
Hardness: Durometer 65D-67D (Medium)
For Use Outdoors: No
Specifications Met: ASTM D4020, FDA Compliant 21 CFR 177.1520

Often used to fabricate frames and protect corners from impact, these UHMW 90° angles have a slippery surface that stands up to scuffs, scrapes, and strikes.

For technical drawings and 3-D models, click on a part number.

Outside				Inside
Ht.	Ht. Tolerance	Wd.	Wd. Tolerance	Ht.	Wd.	Lengths, ft.		Per Ft.
1/8" Wall Thick. (-0.060" to 0.060")
1"	-0.060" to 0.060"	1"	-0.060" to 0.060"	7/8"	7/8"	2, 5, 8, 10	0000000	00000
1 1/2"	-0.060" to 0.060"	1 1/2"	-0.060" to 0.060"	1 3/8"	1 3/8"	2, 5, 8, 10	0000000	0000
2"	-0.060" to 0.060"	2"	-0.060" to 0.060"	1 7/8"	1 7/8"	2, 5, 8, 10	0000000	0000
1/4" Wall Thick. (-0.060" to 0.060")
5/8"	-0.060" to 0.060"	1 1/2"	-0.060" to 0.060"	3/8"	1 1/4"	2, 5, 8, 10	0000000	0000
1 1/2"	-0.060" to 0.060"	1 1/2"	-0.060" to 0.060"	1 1/4"	1 1/4"	2, 5, 8, 10	0000000	0000
2"	-0.060" to 0.060"	2"	-0.060" to 0.060"	1 3/4"	1 3/4"	2, 5, 8, 10	0000000	0000
1/2" Wall Thick. (-0.060" to 0.060")
3"	-0.060" to 0.060"	3"	-0.060" to 0.060"	2 1/2"	2 1/2"	2, 5, 8, 10	0000000	00000
3 1/2"	-0.060" to 0.060"	3 1/2"	-0.060" to 0.060"	3"	3"	2, 5, 8, 10	0000000	00000

Chemical-Resistant PVC 90° Angles

Color: Gray
Temperature Range: 32° to 140° F
Tensile Strength: 7,000-7,800 psi (Good)
Impact Strength: 0.7-3 ft.-lbs./in. (Poor)
Hardness: Rockwell R110-R120 (Hard)
For Use Outdoors: No

Because these PVC Type 1 90° angles stand up to acids and alkalies, they’re often used to fabricate frames, tracks, and supports in chemical-processing applications. This material is easy to thermoform, plus it is an excellent electrical insulator.

For technical drawings and 3-D models, click on a part number.

Outside				Inside		5 ft. Lg.
Ht.	Ht. Tolerance	Wd.	Wd. Tolerance	Ht.	Wd.		Each
0.08" Wall Thick. (-0.01" to 0.001")
1/2"	0.000" to 0.125"	1/2"	0.000" to 0.125"	0.420"	0.42"	0000000	00000
3/4"	-0.125" to 0.125"	1 1/2"	-0.125" to 0.125"	0.670"	1.42"	0000000	00000
3/4"	0.000" to 0.125"	3/4"	0.000" to 0.125"	0.670"	0.67"	0000000	00000
0.08" Wall Thick. (-0.01" to 0.01")
2"	-0.125" to 0.125"	2"	-0.125" to 0.125"	1.920"	1.92"	0000000	00000
1/8" Wall Thick. (-0.063" to 0.063")
1"	-0.125" to 0.125"	1"	-0.125" to 0.125"	7/8"	7/8"	0000000	00000
1/8" Wall Thick. (-0.015" to 0.015")
3/4"	-0.125" to 0.125"	3"	-0.125" to 0.125"	5/8"	2 7/8"	0000000	00000
1 1/4"	0.000" to 0.040"	1 1/4"	0.000" to 0.040"	1 1/8"	1 1/8"	0000000	00000
1 1/2"	0.000" to 0.050"	1 1/2"	0.000" to 0.050"	1 3/8"	1 3/8"	0000000	00000
2"	0.000" to 0.060"	2"	0.000" to 0.060"	1 7/8"	1 7/8"	0000000	00000
0.157" Wall Thick. (-0.019" to 0.019")
3/4"	-0.125" to 0.125"	1 1/2"	-0.125" to 0.125"	0.593"	1.343"	0000000	00000
3/16" Wall Thick. (-0.063" to 0.063")
1 1/4"	-0.125" to 0.125"	1 1/4"	-0.125" to 0.125"	1 1/16"	1 1/16"	0000000	00000
3/16" Wall Thick. (-0.023" to 0.023")
1 1/2"	0.000" to 0.050"	1 1/2"	0.000" to 0.050"	1 5/16"	1 5/16"	0000000	00000
2"	0.000" to 0.060"	2"	0.000" to 0.060"	1 13/16"	1 13/16"	0000000	00000
1/4" Wall Thick. (-0.063" to 0.063")
1 1/2"	0.000" to 0.050"	1 1/2"	0.000" to 0.050"	1 1/4"	1 1/4"	0000000	00000
2"	0.000" to 0.060"	2"	0.000" to 0.060"	1 3/4"	1 3/4"	0000000	00000
1/4" Wall Thick. (-0.03" to 0.03")
1 1/4"	0.000" to 0.040"	1 1/4"	0.000" to 0.040"	1"	1"	0000000	00000
0.275" Wall Thick. (-0.033" to 0.033")
2 3/8"	-0.125" to 0.125"	2 3/8"	-0.125" to 0.125"	2.100"	2.1"	0000000	00000
3 1/2"	-0.125" to 0.125"	3 1/2"	-0.125" to 0.125"	3.225"	3.225"	0000000	000000

Clear Impact-Resistant Polycarbonate 90° Angles

Color: Clear
Temperature Range: -40° to 200° F
Tensile Strength: 8,960 psi (Good)
Impact Strength: Not Rated
Hardness: Rockwell R118 (Hard)
For Use Outdoors: No

Often used when making display racks, machine guards, and other items you need to see through, these 90° angles are made of polycarbonate. This material is commonly known as Lexan, Hyzod, Tuffak, and Makrolon.

For technical drawings and 3-D models, click on a part number.

Outside				Inside
Ht.	Ht. Tolerance	Wd.	Wd. Tolerance	Ht.	Wd.		Each
2ft. Lg.
0.05" Wall Thick. (-0.005" to 0.005")
1/2"	-0.020" to 0.020"	1/2"	-0.020" to 0.020"	0.45"	0.45"	0000000	00000
1"	-0.030" to 0.030"	1"	-0.030" to 0.030"	0.95"	0.95"	0000000	0000
1 1/2"	-0.030" to 0.030"	1 1/2"	-0.030" to 0.030"	1.45"	1.45"	0000000	0000
4ft. Lg.
0.05" Wall Thick. (-0.005" to 0.005")
1/2"	-0.020" to 0.020"	1/2"	-0.020" to 0.020"	0.45"	0.45"	0000000	0000
1"	-0.030" to 0.030"	1"	-0.030" to 0.030"	0.95"	0.95"	0000000	00000
1 1/2"	-0.030" to 0.030"	1 1/2"	-0.030" to 0.030"	1.45"	1.45"	0000000	00000
6ft. Lg.
0.05" Wall Thick. (-0.005" to 0.005")
1/2"	-0.020" to 0.020"	1/2"	-0.020" to 0.020"	0.45"	0.45"	00000000	0000
1"	-0.030" to 0.030"	1"	-0.030" to 0.030"	0.95"	0.95"	00000000	00000
1 1/2"	-0.030" to 0.030"	1 1/2"	-0.030" to 0.030"	1.45"	1.45"	00000000	00000

Clear Chemical-Resistant PVC 90° Angles

Color: Clear
Temperature Range: 32° to 140° F
Tensile Strength: 7,260 psi (Good)
Impact Strength: 0.48-2 ft.-lbs./in. (Poor)
Hardness: Durometer 84D (Hard)
For Use Outdoors: No
Specifications Met: UL 94 V-0

When visibility is essential, use these clear 90° angles for tank parts and in chemical-processing applications. PVC resists acids and alkalies.

For technical drawings and 3-D models, click on a part number.

Outside				Inside		5 ft. Lg.		10 ft. Lg.
Ht.	Ht. Tolerance	Wd.	Wd. Tolerance	Ht.	Wd.		Each		Each
1/8" Wall Thick. (-0.063" to 0.063")
1"	-0.125" to 0.125"	1"	-0.125" to 0.125"	7/8"	7/8"	0000000	000000	00000000	000000
3/16" Wall Thick. (-0.063" to 0.063")
1 1/4"	-0.125" to 0.125"	1 1/4"	-0.125" to 0.125"	1 1/16"	1 1/16"	0000000	00000	00000000	00000
1 1/2"	-0.125" to 0.125"	1 1/2"	-0.125" to 0.125"	1 5/16"	1 5/16"	0000000	00000	00000000	00000
1/4" Wall Thick. (-0.063" to 0.063")
1 1/2"	-0.125" to 0.125"	1 1/2"	-0.125" to 0.125"	1 1/4"	1 1/4"	0000000	00000	00000000	00000
2"	-0.125" to 0.125"	2"	-0.125" to 0.125"	1 3/4"	1 3/4"	0000000	00000	00000000	00000

Angle Bumpers

These bumpers are at a 90° angle to protect corners on equipment, walls, and docks from damage caused by carts, vehicles, and other moving objects. All have a hard rating to withstand high levels of impact. They are nonmarring and can be used outdoors.

Unthreaded-hole bumpers mount with screws. Drill-your-own hole bumpers mount with screws after drilling holes. They can also be nailed down.

Plastic bumpers are chemical resistant. Vinyl plastic bumpers resist solvents. Polyurethane foam bumpers resist abrasion better than plastic or vinyl plastic bumpers.

UV-resistant bumpers won’t dry out and become brittle when exposed to UV rays.

					Mounting Hole
	Lg.	Ht.	Thick.	Counterbore Dia.	Dia.	Ctr.-to-Ctr.	Temp. Range, °F	For Use Outdoors	Hardness Rating	Hardness	Nonmarking	Color	Performance Properties		Each
Unthreaded Hole
Plastic
1	6 1/4"	2 1/2"	1 1/2"	3/4"	1/4"	2 1/2"	-20° to 200°	Yes	Hard	Durometer 70A	Yes	White	UV Resistant	000000000	000000
1	6 1/4"	2 1/2"	1 1/2"	3/4"	1/4"	2 1/2"	-20° to 200°	Yes	Hard	Durometer 70A	Yes	Black	UV Resistant	000000000	00000
Polyurethane Foam
2	7"	7"	7"	1 1/8"	3/8"	3"	-10° to 140°	Yes	Hard	Durometer 70A	Yes	Black	UV Resistant	000000000	000000
2	12"	4 1/4"	2 1/4"	1"	3/8"	7 1/4"	-10° to 140°	Yes	Hard	Durometer 70A	Yes	Gray	UV Resistant	000000000	000000
2	12"	4 1/4"	2 1/4"	1"	3/8"	7 1/4"	-10° to 140°	Yes	Hard	Durometer 70A	Yes	Black	UV Resistant	000000000	000000
Drill-Your-Own Hole
Vinyl Plastic
3	8"	3 3/4"	2 1/4"	__	__	__	0° to 120°	Yes	Hard	Durometer 85A	Yes	White	__	0000000	00000
3	10"	6"	3"	__	__	__	0° to 120°	Yes	Hard	Durometer 85A	Yes	White	__	0000000	00000
4	7 1/8"	3 5/8"	1 1/4"	__	__	__	0° to 120°	Yes	Hard	Durometer 85A	Yes	White	UV Resistant	00000000	00000
4	7 1/8"	3 5/8"	1 1/4"	__	__	__	0° to 120°	Yes	Hard	Durometer 85A	Yes	Gray	UV Resistant	00000000	00000
4	7 1/8"	3 5/8"	1 1/4"	__	__	__	0° to 120°	Yes	Hard	Durometer 85A	Yes	Black	UV Resistant	00000000	00000

Email Us

About Composites

About Durometer Hardness Scales

About Plastic

Multipurpose Flame-Retardant Garolite G-10/FR4 Angles

Arc-Resistant Garolite G-9 Angles

Arc-Resistant GPO3 Fiberglass 90° Angles

Chemical-Resistant Slippery PTFE 90° Angles

Slippery UHMW Polyethylene 90° Angles

Chemical-Resistant PVC 90° Angles

Clear Impact-Resistant Polycarbonate 90° Angles

Clear Chemical-Resistant PVC 90° Angles

Angle Bumpers