Ready to withstand weather and UV rays, this insulation comes wrapped in protective jacketing.

Less flexible than rubber foam, this insulation restricts absorption of water, air, and gas. It is typically used in plumbing applications

These rigid, lightweight melamine foam tubes are wrapped in an ISO Class 5 and Fed. Spec. Class 100 clean room jacket that is suitable for sanitary and washdown applications. They’re typically used on cold and hot water piping and with refrigeration systems.

Wrap pipes, tubing, and fittings to prevent condensation from forming. These strips are for use on copper, iron, and steel.

The lowest-density insulation we offer, these sheets are made of lightweight melamine foam.

The fiberglass facing on these flexible silicone foam sheets protects against highly abrasive conditions and resists tearing.

Fill cracks with this single-use can of expanding foam insulation. It hardens enough to be cut in one hour and reaches full strength in 24 hours.

This two-part expanding foam insulation meets ASTM standards for flame and smoke and covers large areas.

These sheets resist the absorption of water, air, and gas and are widely used in cold-storage and packaging applications.

Even after extended compression, these high-performance polyurethane foam sheets and strips bounce back to shape faster than any other foam we offer. Also known as Poron urethane, they also stand up to wear caused by rubbing and scraping.

These dual-material foam sheets and strips have ultra-soft polyurethane foam on one side and chemical-resistant polyethylene foam on the other. They are widely used in packaging applications to absorb shock and damp vibration.

Good for tough vacuum-sealing and low closure-force applications, these polyurethane foam sheets and strips have open/closed cells to keep water, air, and gases from being absorbed when they are compressed at least 25%. Even after extended compression, all bounce back to shape faster than other foams we offer.

Made of FDA-listed materials, these polyethylene foam sheets are often used as packaging for food products to absorb shock and damp vibration.

These sheets and strips are made of cross-linked polyethylene, so they are stronger and more chemical resistant than other types of polyethylene foam.

Exceptionally strong, this lightweight ionomer foam offers excellent resistance to impact, UV light, and water. It stands up to wear caused by rubbing and scraping and is often used on bumpers and buoys.

The open top allows these foam U-channels to slide over and cushion an edge.

There are hundreds of cushioning pillows in every foot of these pliable mesh sheets. They're often used as a protective liner in drawers and cabinets and anywhere a nonskid surface is required.

Also called plucking foam, these scored foam sheets allow you to pull out individual cubes for custom-shaped packaging.

These sheets and strips will bounce back to shape, even after extended compression.

Prevent the spread of flames with these self-extinguishing silicone foam sheets and strips.

A thin layer of aluminized fiberglass on this silicone foam reflects heat to protect sensitive equipment.

Protect sensitive equipment from heat buildup with this silicone foam. These sheets are commonly used to fill gaps and damp vibration in computers, battery installations, and pipe assemblies.

In addition to being lighter in weight than silicone foam, this polyimide foam also remains soft and conformable across a broader temperature range.

These silicone foam cords meet NSF/ANSI 51 for food equipment materials. Use them to seal and cushion narrow spaces in food service equipment.

In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.

Just like the material found in wetsuits, these neoprene foam sheets are encased in nylon fabric for additional protection from wear caused by rubbing and abrasion.

The original mouse pad material. These natural foam rubber sheets have a crisscross-textured skin on one side for a nonslip gripping surface and a layer of polyester fabric on the other side that allows objects to smoothly slide across it.

These vinyl foam sheets and strips are so conformable that once they're compressed they won't fully spring back. Use them to fill gaps and seal uneven surfaces.

These EPDM foam tubes have the best resistance to water, sunlight, and oxidation of all the foam tubes we offer.

These neoprene foam cords stand up to water, sunlight, and oxidation, plus they resist swelling when they come into contact with oil.

Made from a blend of Buna-N, neoprene, and vinyl, these foam strips have good resistance to oil.

Cushion electronic components from impact as you protect them from electrostatic shocks during shipping and storing.

Offering excellent resistance to corrosive environments, these Viton® fluoroelastomer foam sheets and strips stand up to a wide variety of chemicals, fuels, and oils.

The foil facing reflects heat. Use these sheets to quiet noisy areas and line machine enclosures. They’re made of humidity-resistant polyurethane foam.

This insulation meets ASTM E162 for flame retardance and ASTM E662 for smoke output. Use to quiet noisy areas and line machine enclosures. Sheets are made of polyimide foam.

Furnished with two hangers for easy mounting around your facility, these sheets quiet noisy areas. Made of melamine foam, they are peaked on both sides for good sound absorption in large open spaces.

The best sound absorbers of all our rigid sheets, use to quiet noisy areas in your facility. They're peaked on one side for more sound-absorbing area than flat sheets. Made of melamine, they have an acrylic resin finish that resists dust and dirt and wipes clean.

These seals have an EPDM foam rubber bulb.

The Buna-N foam rubber bulb on these seals also resists grease, salts, water, steam, and most detergents.

FDA compliant, these seals can directly touch food. They’re made of Buna-N foam, so they resist oil, grease, salts, water, and most detergents.

Save time covering corners—these seals come formed to a corner, so they don't require bending or cutting.

These seals have a solid bulb.

Softer and more flexible than EPDM rubber, these EPDM foam seals have a wiper that clears debris and a bulb that conforms to uneven surfaces to guard against dust, noise, and vibration.

With an accordion shape, these seals extend to cover large gaps, so they block debris and allow the two edges they connect to move.

Made of solid silicone foam rubber, these seals also resist water and salts.

These seals are made of solid EPDM foam rubber.

These hollow seals offer better compressibility than solid seals.