We will reply to your message within an hour.
Stainless steel enclosures are more corrosion resistant than aluminum for use in environments with corrosive liquids.
Internal mounting bosses enable you to attach panels or DIN rail inside the enclosures using self-tapping screws. Made of polycarbonate, these nonconductive enclosures resist denting, chipping, and cracking.
Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. Enclosures are made of nonconductive polycarbonate that resists denting, chipping, and cracking.
Aluminum enclosures are a lightweight yet durable alternative to stainless steel.
These enclosures have thicker walls than standard aluminum enclosures, but are still a lightweight yet durable alternative to stainless steel.
Fiberglass enclosures resist denting better than metal and are more UV resistant than polycarbonate enclosures. They are nonconductive.
PVC enclosures are nonconductive and chemical resistant, withstanding solvents, alkalies, and acids.
With a hygienic design, these enclosures minimize spots where food, debris, and water could collect after washdowns. Use them to house and mount switches, buttons, and other components in sanitary environments.
Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. These enclosures have a clear cover, so you can inspect components without opening the enclosure.
Made of polycarbonate, these enclosures resist denting, chipping, and cracking.
Fiberglass enclosures are stronger than polycarbonate enclosures and nonconductive.
Control access to these enclosures with a key-operated lock.
View all sides of your installed components.
Holes in the cover allow easy installation of push buttons, switches, and indicating lights.
Made of polycarbonate, these enclosures resist denting, chipping, and cracking better than stainless steel enclosures.
Protect electronics from washdowns in food plants and other sanitary environments. These enclosures have standard-size push-button holes, saving you the effort of measuring and cutting holes yourself. A shroud hangs over the holes to guard buttons from damage and accidental pushing.
Protect electronics from washdowns in food plants and other sanitary environments. These enclosures have standard-size push-button holes, saving you the effort of measuring and cutting holes yourself.
Protect electronics from washdowns in food plants and other sanitary environments. These enclosures mount directly into walls to protect wiring and reduce the surface area that needs to be cleaned. Standard-size push-button holes are already installed, saving you the effort of measuring and cutting holes yourself.
Made of fiberglass, these enclosures are lightweight and won’t rust, but still shield push-button controls from water, dirt, and oil.
House electrical components in these general purpose enclosures.
These enclosures have internal slots to hold circuit boards in place.
Choose a body and two matching end caps to make your own dust-tight or watertight enclosure.
With internal slots and external fins, these enclosures hold circuit boards securely and dissipate heat to keep electronics from overheating.
These enclosures withstand temperatures up to 475° F.
These enclosures allow you to inspect your electronics without opening the cover.
Small and lightweight, these enclosures are used with sensors, switches, and testing devices.
Keep electronics safe from harmful contact with hands and tools while still allowing air and moisture to enter.
Lighter than stainless steel yet durable, these aluminum enclosures protect electronics from frequent washdowns and withstand periodic submersion in water.
Attach these enclosures to machine panels and walls by their mounting feet—no need to open the cover and expose sensors, switches, and other electronics in wet locations. Made of aluminum, they’re lighter in weight than stainless steel yet resist rusting from water.
Install these enclosures on control panels and walls and inspect what’s inside without exposing their contents in wet and outdoor locations.
Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components.
Fasten these enclosures to machine control panels or walls without exposing the contents to wet and oily environments.
Able to withstand periodic submersion in water, these enclosures offer our highest level of protection from liquids. They’re made of fiberglass to resist impact and corrosion from solvents, alkalis, and mild acids.
Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks.
No need to cut your own holes—these enclosures already have them to make installing push-buttons, switches, and indicating lights quick and easy.
With standard-size, evenly spaced, aligned push-button holes, these washdown enclosures save you the time and effort of cutting those holes yourself.
Inspect components without opening the cover.
Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks. A clear cover lets you monitor the inside without opening them.
Check on the contents inside these enclosures from every angle without opening them in wet environments.
Mount these enclosures directly to machine control panels in wet environments and view the contents without opening them.
These enclosures are rated NEMA 4 for protection from dirt and washdowns.
House emergency stop buttons, life safety equipment, and other devices that need to be seen with these brightly colored enclosures, which are easy to spot even in high-dust areas.
Protect keypads, push-buttons, and other handheld controls with these round enclosures that are more comfortable to hold than square enclosures.
Keep components safe from rain, snow, and ice. These enclosures are rated NEMA 3R for protection from dirt, falling liquids, and light splashing.
UL and C-UL classified, these enclosures safely house push-button controls and electronics where there’s explosive dust and gas.
Holes in the cover of these enclosures allow easy installation of push buttons, switches, and indicating lights.
With an overhanging top and a NEMA 3RX rating, these enclosures guard electronics from snow, rain, and sleet as well as dirt and light splashing.
Suitable for installing in the ground or for use in wet environments, these direct burial enclosures are rated NEMA 6P for protection from dirt, washdowns, corrosion, and water submersion.
Two separate chambers allow you to access wiring connections in the lower section without disturbing components that you install in the upper section.
Mounted horizontally, such as on machinery or rooftops, these enclosures protect wiring and other electrical components from rain, snow, and ice thanks to their overhanging top.
Made of aluminum, these enclosures resist corrosion from rain, sleet, and snow. While not as corrosion resistant as stainless steel, aluminum is lighter for better mobility, and also easier to machine for custom mounting.
For use in hazardous locations, these enclosures are rated NEMA 7 and 9 and meet UL Class I, Divisions 1 and 2, Groups B, C, and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2.
Make your push buttons, switches, and indicating lights more visible and ergonomic to use. Enclosures mount on either of two sides, creating a 30° or 60° slanted surface.
Often used to house emergency-stop buttons, switches, and lights, these bright yellow enclosures are easy to spot, even in dimly lit areas. All have standard-size push-button holes to save time—no need to measure and cut your own holes.
Fans built in to these enclosures keep electronics at the temperature you set, and the filtered intake and exhaust let cool air flow through the enclosure without letting water and contaminants in.
These enclosures are rated NEMA 13 for indoor protection from dirt and oil/coolant spraying.
Bury these enclosures in the ground or in concrete. They withstand freeze/thaw conditions and have an open bottom for water drainage.
A 9-volt battery fits inside a compartment in these enclosures to power testing devices and other hand-held instruments.
Create battery-powered, hand-held devices such as card and signal readers—these enclosures have a clear cover for checking screens and status lights inside.
The unique shape of these enclosures provides a handle to hold scanners, detectors, and remote switches.
Protect monitors and televisions from environmental damage with these enclosures.
Rated NEMA 12 for protection from dirt and oil/coolant dripping.
These freestanding enclosures have a gasketed door with clamps to ensure a watertight seal. They are rated NEMA 4 and 13 for protection from dirt, washdowns, and oil/coolant spraying.
Create a human-machine interface that’s designed to attach to a suspension arm, so you can move your HMI around.
Build out human-machine interfaces by installing buttons, switches, gauges, and other components to monitor and control machinery.
These cabinets accommodate up to 3,200 lbs. of equipment and have larger interiors than standard electronics cabinets.
House and organize up to 800 lbs. of components such as servers, automation controls, and computers. All are compatible with standard 19" wide components.
With a top that overhangs the cover, this raceway keeps out rain. It is rated NEMA 3R for protection from liquids and light splashing.
Protect wire and cable from dust, dirt, and oil/coolant dripping—this raceway is rated NEMA 12.