Remove small particles in lines that reach up to 5,000 psi to protect sensitive equipment, such as hydraulic controls.

Capture oil, oil vapor, and other contaminants from your pump to prevent them from spreading into your high-vacuum system.

For use in medium-pressure applications, these Y-strainers have good corrosion resistance.

Withstands temperatures up to 450° F.

Made of 316 stainless steel, these basket strainers have better corrosion resistance than iron and bronze basket strainers.

These basket strainers are constructed for use with boilers and pressure vessels.

Iron basket strainers offer fair corrosion resistance.

Polyester strainers withstand temperatures up to 120° F.

CPVC can handle higher temperatures than PVC and polyester. Use for applications up to 180° F.

The short height allows for installation in cramped spaces.

The tallest of our suction strainers, these have a large surface area to retain more debris. They are also known as sump strainers.

Withstands temperatures up to 250° F.

Keep oil burners operating efficiently with clean oil.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Mount these filters to a 35 mm DIN rail with the included brackets.

Housing and bowl are 316 stainless steel to handle extremely corrosive environments and meet NACE (National Association of Corrosion Engineers) specifications.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.

No need to buy and service two filters—these filters have a single element that removes both large and fine particles.

These filter elements fit in ASCO Numatics modular two-stage compressed air filters to remove water droplets, oil, and particles as small as 0.01 microns.

Housing and bowl are 304 stainless steel for good corrosion resistance in damp environments.

Also known as coalescing filters, these filter elements fit in Festo modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in ASCO Numatics modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in ARO modular compressed air filters to remove oil and particles as small as 0.3 microns.

Also known as coalescing filters, these filter elements fit in Parker modular compressed air filters to remove oil and particles as small as 0.01 microns.

These dryer/filters have a clay desiccant that removes moisture, oil, and particles, so there’s no need to install a separate filter and dryer. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.

Each of these filter/dryers has two desiccant towers—one that absorbs moisture, particles, and oil in the air while the other reactivates saturated desiccant so you have an uninterrupted supply of clean, dry compressed air.

When water is condensed out of a compressed air system, it contains oil from the compressor that makes disposal difficult. These separators use two-stage filtration to reduce oil content to below 20 parts per million.