With a smaller diameter and shorter length than standard sized switches, these fit in the most space-constrained areas.

Easily mount these flat switches to a base or rail.

Sense objects from farther away than with other DC proximity switches that have the same diameter.

Use these switches to sense metallic objects in environments containing flammable gases and combustible dust. ATEX and IECEx certified to protect against explosion, they produce a low-current, low-voltage NAMUR signal, so they won’t ignite or create sparks.

Sense objects as they pass through the switch’s ring via tubing or a funnel. These switches are often used to monitor blockages, detect breaks in spooling wire, or count small metallic parts, such as screws, during the stamping process.

Turn the face on these switches to sense metallic objects from the front, sides, top, or bottom.

For use in volatile areas, these intrinsically safe switches detect objects when they pass through the slot. They use a NAMUR signal to operate at a low current and voltage, so they won’t ignite or create sparks. ATEX and IECEx certified, they protect against explosion.

Mount these intrinsically safe switches to flat surfaces in volatile areas. Their low-current, low-voltage NAMUR signal means they won’t ignite or create sparks while in use. ATEX and IECEx certified, they meet international standards to protect against explosion where combustible dust and flammable gases are present.

Actuate your switch with precision—these proximity switches have an easy-to-read screen for precise distance inputs, measurements, and troubleshooting.

These switches have a longer sensing distance compared to other proximity switches with the same diameter.

Rotate the face on these switches five different directions for easy installation and positioning—they work with both AC and DC inputs.

These switches sense when a valve is open or closed, supporting flow and temperature control within your system and offering reliable feedback.