Create a vibration-resistant connection—the socket on these cords securely locks onto any male receptacle and will not detach until manually unlocked. They also have a 90° elbow plug that fits flush against a wall outlet, so they fit behind machinery and in other areas where space is tight. Use them with computers, lab equipment, and office machines that have IEC connections.

Create a vibration-resistant connection—the socket on these cords securely locks onto any male receptacle and will not detach until manually unlocked. Use them with computers, lab equipment, and office machines that have IEC connections.

Power multiple devices from one power source. Use these splitters with computers, lab equipment, and office machines that have IEC connections.

Use SJT cords in dry or damp locations.

SVT cords are ultra-flexible and as pliable as vacuum cleaner cords. They withstand repeated winding.

SJTW cords have a water-resistant insulation.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot. Use them with computers, lab equipment, and office machines that have IEC connections.

Cords with a 90° elbow socket fit flush against equipment, so equipment can be pushed against a wall.

For technical drawings and 3-D models, click on a part number.

The shielding blocks signal interference from nearby equipment and devices. Use these cords with computers, lab equipment, and office machines that have IEC connections.

SVT cords are ultra-flexible and as pliable as vacuum cleaner cords. They withstand repeated winding.

Use SJT cords in dry or damp locations.

Tug these cords to full length, and they’ll stay plugged in. Also called hospital-grade cords, they form an extra-tight connection with outlets. After stretching, they return to a tight, tangle-free coil. Use them for computers, lab equipment, and other machines that have IEC connections. They'll stand up to damp environments thanks to their insulation, which is designated as SJT. The plug is marked with a green dot, indicating it is hospital-grade.

Create secure, vibration-resistant connections on both ends—these cord splitters have a hospital-grade plug and locking sockets. To keep them from detaching, the plug forms an extra-tight connection with outlets. Once they’re locked onto male receptacles, the sockets stay put until you unlock them. The SJTW cord has a water-resistant outer insulation. Use with computers, lab equipment, and office machines that have IEC connections.

For technical drawings and 3-D models, click on a part number.

Create a secure, vibration-resistant connection on both ends—these cords have a hospital-grade plug and a locking connector on the socket. The plug has an extra-tight connection to stay plugged into your electrical outlet. A lock on the socket flips over the male receptacle on your equipment. The lock will keep the connection in place until it is manually unlocked. Designated SJT, these cords are safe to use in dry or damp locations. Use with computers, lab equipment, and other machines with IEC connections. The plug is marked with a green dot, indicating it is hospital-grade.

For technical drawings and 3-D models, click on a part number.

Use these cords with computers, lab equipment, and office machines that have IEC connections. They have a plug that turns to lock in an outlet, so they remain securely attached in high-vibration applications.

For technical drawings and 3-D models, click on a part number.

Keep personnel safe from electric shock with these cords. The industry desgination is SJTW, so the insulation resists water.

Cords with a 90° elbow plug fit flush against a wall outlet, so they fit behind machinery or in areas where space is tight.

Use cords with an IEC C13 socket for computers, lab equipment, and office machines.

Cords with automatic GFCI reset immediately regain power after ground is established.

Cord with a power-indicating light have a light on the socket that illuminates when the cord has power.

Pair these connectors with standard IEC power cords to bring power into or out of your electronic devices. Often used to convey power from wall outlets, there’s no need to wire your devices to an external power source. Instead, wire these connectors into your device with the terminals on the back of each connector. Most meet U.S. or international standards for safety.

Receptacles are often installed in electrical devices. Most also include shock protection. Class I shock protection means they're insulated and have a protective ground to prevent electrical shocks. Female receptacles are frequently used to bring power out of one electronic device and into another. C13 receptacles are also known as Sheet F outlets. Screw-on connectors mount to devices with any panel thickness, as long as you can drill mounting holes into the device. Snap-in connectors mount to devices with snap-in tabs—no fasteners needed—but require a specific panel thickness and a precisely cut hole for secure mounting.

Solder terminal wire connections are more secure than screw and quick-disconnect terminal connections. Quick-disconnect terminal wire connections are faster to wire than screw and solder terminal connections. The terminals slide together with the quick-disconnect terminals on your wiring and are easily disconnected by hand, but still provide a strong hold.

IP-rated connectors meet standards for protecting you from making contact with a live circuit. The larger the first digit, the smaller the object it protects against. An IP30 rating means screwdrivers and other objects larger than 2.5 mm won't get in. Connectors with a UL 94 rating have passed one of UL's flame tests. UL 94 V-0 means they self-extinguish within 10 seconds if they catch fire and won’t spread flames from dripping. UL 94 V-2 means they self-extinguish within 30 seconds if they catch fire, but may drip flaming particles.

For technical drawings and 3-D models, click on a part number.

Send power to your device using the inlet, then route power to another device through the outlet—all with standard IEC power cords. Compared to using separate receptacles, these combination connectors are quicker to install and have a more streamlined appearance. Snap the connector into your panel—tabs on the side hold them in place without needing fasteners. Then solder your power supply to the wire terminals for a secure, permanent bond. C13 receptacles are also known as Sheet F outlets.

Rated IP30, these connectors prevent objects greater than 2.5mm wide, such as screwdrivers, from touching internal components and accidentally shocking you. With Class I shock protection, they’re insulated and have a protective ground.

These connectors meet UL 94 V-0, which means they self-extinguish within 10 seconds if they catch fire, and won’t spread the fire by dripping. They’re also UL recognized, CE marked, CSA certified, and ENEC marked, so you know they meet stringent safety standards.

For technical drawings and 3-D models, click on a part number.