Snap these splices onto your wire and they’ll pierce the insulation without you having to strip it. Pliers (not included) are recommended to install wire. These splices are rated UL 94 V-2, so they meet flammability standards.

Connect a tap wire to a main wire without stripping—these wire taps penetrate insulation. To install, squeeze the tap with standard pliers; a built-in U-shaped metal contact penetrates the insulation and grips the wire.

UL 94 V-2 or V-0 rated taps meet flammability standards.

For technical drawings and 3-D models, click on a part number.

Filled with gel, these taps seal out moisture. Use them to connect a tap wire to a main wire without stripping—they penetrate insulation. To install, squeeze the tap with standard pliers; a built-in U-shaped metal contact penetrates the insulation and grips the wire.

UL 94 V-2 rated taps meet flammability standards.

For technical drawings and 3-D models, click on a part number.

Convenient for jobs where you don't have crimpers on hand, these wire taps twist together to connect a tap wire to a main wire. The cap locks the wire into place, making them good for high-vibration applications. As you twist the cap onto the main wire, it pierces the insulation, so you don’t need to strip the wire. However, you’ll need to strip the tap wire.

For technical drawings and 3-D models, click on a part number.

Tap a wire or add a finished terminal to the end of a wire. The parallel taps quickly connect to your wire without stripping the wire first. Squeeze the tap with standard pliers and the U-shaped contact pierces the insulation and grips the wire. Insert a snap plug into the parallel tap. Parallel tap and snap plug are sold separately.

Taps connect to wires with male quick-disconnect terminals. Use a crimper for wire installation; you do not need to strip wire.

Tighten screws to connect a tap wire to a main wire. For easy installation, you can lay the main wire in these taps by sliding off the screw plate.

Covers (sold separately) are plastic, so they fully insulate wire taps when connected. They snap shut for quick installation.

For technical drawings and 3-D models, click on a part number.

No wire stripping is required—these connectors pierce the insulation.

Gel-filled connectors protect your connection from corrosion, humidity, water, and dirt.

Crimper (sold separately) is required for wire installation.

For technical drawings and 3-D models, click on a part number.

No crimping or wire stripping needed—this assortment includes twist-on wire connectors and insulation-piercing wire taps.

Twist the threaded end cap onto a main wire and a tap wire to connect them without crimping. Since you twist to connect, these wire taps are convenient for jobs where you don’t have many tools on hand. The cap locks the wire into place, making them good for high-vibration applications. As you twist the cap onto the main wire, it pierces the insulation, so you don’t need to strip the wire. However, you need to strip the tap wire.

Maintain a supply of extra terminals and splices in various sizes. Use a crimping tool (included with some assortments) to install wire.

Barrel-insulated terminals have a plastic cover to prevent short-circuiting with nearby wire. Fully insulated terminals have a connection tab that’s completely covered, leaving no metal exposed when mated.

Nylon insulation is more durable and chemical resistant than vinyl insulation.

Install these connectors in a panel cutout to create a port for transferring data. You use a punch-down tool to terminate, so there’s no need for wire stripping. To make setup quick and easy, these connectors come with a color-coded wiring guide.

Shielded connectors protect equipment from electromagnetic interference.

Choose unshielded connectors when signal interference isn’t a concern.

Add a cap to protect these connectors when not in use.

For technical drawings and 3-D models, click on a part number.